[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] XEN 3.0.4-1 / Iptables is not working properly



I am having this issue also. It appears to be random though on our lightly 
loaded development boxes. It is also always in bursts for one connection too. 
As all the returning packets hit the log rule and then everything runs fine for 
maybe half an hour.

I have observed the problem with xen versions 3.0.3 and 3.0.4.

Cheers,

Brad


On Thu, 19 Apr 2007 10:24:52 +0200
Maik Brauer <mailinglist@xxxxxxxxxxxxxxx> wrote:

> Hello,
> 
> this is not working in my case.
> The Problem still exist.
> If this is a real problem, some other people should have the same
> issue.
> 
> Are there any suggestions ??
> 
> Regards
> Maik
> 
> 
> Christo Buschek wrote:
> > Hello Maik.
> >
> > I don't really have an explanation for you, but for me to make
> > iptables work I had to run 'ethtool -K eth0 tx off' inside the vm
> > and dom0 on the device. That made iptables work for me.
> >
> > Maybe it also helps you.
> >
> > greetinx
> > Christo
> >
> > On Thu, 2007-04-19 at 09:18 +0200, Maik Brauer wrote:
> >   
> >> Hello,
> >>
> >> I've installed XEN3.0.4-1 and problems with the IPtables settings.
> >> Please see below the firewall settings for Domain0:
> >> Chain INPUT (policy ACCEPT)
> >> target     prot opt source               destination
> >> ACCEPT     0    --  anywhere             anywhere
> >> ACCEPT     tcp  --  anywhere             mbs-rootsrv         tcp
> >> dpt:ssh ACCEPT     0    --  anywhere
> >> anywhere            ctstate RELATED,ESTABLISHED
> >> LOG        0    --  anywhere             anywhere            LOG
> >> level warning
> >> DROP       0    --  anywhere             anywhere
> >>
> >> Chain FORWARD (policy ACCEPT)
> >> target     prot opt source               destination
> >>
> >> Chain OUTPUT (policy ACCEPT)
> >> target     prot opt source               destination
> >>
> >>
> >> But then for example connection which are related to a server
> >> request (DNS requests / port53, etc) will be blocked by the
> >> firewall. Here is an example of an request:
> >> Apr 19 09:06:19 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=213.133.99.99 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00
> >> TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32803 LEN=53
> >> Apr 19 09:06:20 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=26.104.239.90 DST=88.198.xx.xx LEN=393 TOS=0x00 PREC=0x00
> >> TTL=55 ID=44193 PROTO=UDP SPT=31178 DPT=1026 LEN=373
> >> Apr 19 09:06:24 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=213.133.98.98 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00
> >> TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=32804 LEN=53
> >> Apr 19 09:06:27 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=213.133.100.100 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00
> >> TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32805 LEN=53
> >> Apr 19 09:06:33 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=213.133.99.99 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00
> >> TTL=59 ID=0 DF PROTO=UDP SPT=53 DPT=32803 LEN=53
> >> Apr 19 09:06:38 rootsrv kernel: IN=eth0 OUT= PHYSIN=peth0
> >> PHYSOUT=vif0.0 MAC=00:e4:3c:65:37:37:03:02:85:1a:e2:e0:08:00
> >> SRC=213.133.98.98 DST=88.198.xx.xx LEN=73 TOS=0x00 PREC=0x00
> >> TTL=60 ID=0 DF PROTO=UDP SPT=53 DPT=32804 LEN=53
> >>
> >>
> >> When I flush the Iptables or I will put in each request then
> >> everthing is working fine. But you never now which server will
> >> answer to a request, so it is
> >> impossible to configure all ip-addresses. This should be done due
> >> to the line: -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED
> >> -j ACCEPT which is unfortunately not working.
> >>
> >> What is the problem and the solution ?
> >> Many Thanks.
> >>
> >> Kind Regards,
> >> Maik Brauer
> >>
> >>
> >>
> >> _______________________________________________
> >> Xen-users mailing list
> >> Xen-users@xxxxxxxxxxxxxxxxxxx
> >> http://lists.xensource.com/xen-users
> >>
> >>     
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >   
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

Attachment: signature.asc
Description: PGP signature

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.