Re: [Xen-users] advanced bridging...

[Yevgeniy Goldberg <thegoldberg@xxxxxxx>]

Hi Marc,

I saw your recommendation and would like to ask your help in binding  
my DomU network interface to the physical eth1
I have 2 physical interfaces on my host: eth0 (connected to Internet)  
and eth1 (connected to my home 10. network)
I need to be able to have all my DomU to be connected to the eth1 (of  
whatever its virtual representation may be)
Any ideas?

Best regards,

-Eugene
On May 3, 2007, at 10:22 AM, Marc Patino Gómez wrote:

> Hi Ronan,
>
> do you want to do something like this (see the image) ?
>
> After reading a lot of stuff I made a wrapper of network-bridge,  
> that I call network-bridge-wrapper, here is it:
> #!/bin/sh
> /etc/xen/scripts/network-bridge start bridge=xenbr0 vifnum=0
> /usr/sbin/brctl addbr xenbr1
> /sbin/ifconfig xenbr1 up
>
> I changed the line in xend-config.sxp that calls, network-bridge to  
> call network-bridge-wrapper ...
> If you want I can post more info about this config (my domu config  
> files, iptables, ebtables....). I'm using Debian, so... I hope  
> scripts  in CentOS are so close to Debian.
> Regards,
>
> Marc
>
>
> Ronan wrote:
> > My situation:
> > Running centos5 on a machine directly connected to internet.
> > I have a paravirtualised centos5 core machine in domu1 with only 1  
> > eth configured eth0 dy dhcp.
> > What I want:
> > to configure the dom0 bridge to simply route all traffic at  
> > ethernet level to dom1(firewall/router) and have dom1 then nat if  
> > out to my other domu's and machines on my private 192.168 network  
> > using dhcpd configured on eth1 on the machine.
> > My difficulties:
> > setting up the dom0 bridging to do what i want ie xenbr0 to eth0  
> > on domu1 and then xenbr1 to eth1 on domu1
> > I then intend to remove / lock dom0 down and only use the domu's  
> > as dhcp configured servers.
> > There are a couple of URLs i've looked at
> > http://lists.xensource.com/archives/html/xen-users/2006-02/ 
> > msg00602.html
> > etc but there aren't any specific configuration information.
> > Can i get some pointers as to where to look, or even example configs?
> >
> > thanks
> >
> > Ronan
> >
> > (ps if this is the 3rd like message of mine today i apologise, I  
> > can tell if the other two messages i send actually did...)
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> <xen.png>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users