Iñaki Baz Castillo ha scritto:
El Tuesday 08 May 2007 13:37:30 escribió:
Thank for your answer i've tried to set a static mac address for my DomU...
but i have the same problem to use network into DomU.
i put
vif = [ 'ip=192.168.1.211, mac=00:16:00:00:00:01' ]
into my DomU config file
I'm not sure that the MAC you have put it allowed in Xen.
Try with 00:16:3e:60:73:3d instead and probe again.
i'll tried with the mac you sudgest and other
in this document http://wiki.xensource.com/xenwiki/XenNetworking
it's explained that mac can assume that value:
XY:XX:XX:XX:XX:XX
where X is any hexadecimal digit, and Y is one of 2, 6, A or E.
but DomU network still don't work
i restarted my server... but...
now when i enter in DomU console (xm console myDomUname)
i've the follow message:
netfront:device eth0 has flipping receive path
Humm, not idea about it :(
but similar errors appear in Google, try it ;)
i've just see on google about that error
in this document there is an answer
http://lists.xensource.com/archives/html/xen-devel/2006-11/msg00583.html
but i don't understand what exactly i must do to fix it
the document say:
> I'm running 3.0.3 on 2.6.16.29 on debian amd64 on a dual core Opteron 265.
> In a debian amd64 domU I see these messages:
>
> netfront: device eth0 has flipping receive path.
>
> I noticed ssh connections to my domU are dropped quite frequently.
> But I am not sure if this is related.
>
> Can anyone shed any light on the meaning of the above error?
It's not an error, just an informational statement.
If you want to try the 'copying receive path', place 'xennet.rx_copy' on
your domU kernel command line.
-- Keir
What meaning exactly?
'copying receive path', place 'xennet.rx_copy' on
your domU kernel command line
i see that at boot of DomU there is a fatal error...
modules /lib/modules/2.6.18-4-xen-vserver-amd64
isn't founded at boot
:(
how can i solve that problem?
if i do the following:
# cat /proc/net/dev
i see that i've
lo and eth0 too
but if i do
# ifconfig
i see only lo and no other interface
What does occur if you do in domU:
# ifconfig eth0 192.168.1.1 netmask 255.255.255.0
if i do that... ifconfig show eth0 interface...
but i can't use the network... ping don't work... apt don't work...
