RE: [Xen-users] WinXP cannot partition disk

["Rob van Oostveen" <rob@xxxxxxxxxxxxxxx>]

Mark,

I'm running RedHat FC6 and used the virtualization that comes along with the 
distro. And yes, SELinux is enabled.. I will try disable SELinux and see what 
happens.

Thanks for your response.

Regards,
Rob

On Mon, 4 Jun 2007 14:51:11 +0200, Petersson, Mats wrote
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
> > Rob van Oostveen
> > Sent: 04 June 2007 13:21
> > To: Mark Williamson; xen-users@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [Xen-users] WinXP cannot partition disk
> > 
> > Mark,
> > 
> > Thank you for your reply. I've tried your suggestions as 
> > well, but without
> > success. This is my config file:
> > 
> > kernel="/usr/lib/xen/boot/hvmloader"
> > builder="hvm"
> > memory=512
> > shadow_memory=8
> > vif=['type=iomem, bridge=xenbr0']
> > disk=['phy:/dev/vg/winxp,hda,w', 'phy:/dev/cdrom,hdc:cdrom,r']
> > device_model='/usr/' + arch_libdir + '/xen/bin/qemu-dm'
> > boot="d"
> > sdl=0
> > vnc=1
> > stdvga=0
> > 
> > All not mentioned is left default. I copied the default 
> > xmexample.hvm to
> > winxp.hvm and changed it to above.
> > 
> > I've tried to load the iso the way you suggested, but I still 
> > get the same
> > results. It looks like dom0 cannot access the iso because of 
> > insufficient
> > rights, tho the file is world readable.
> 
> Are you by any chance running a "redhat" based Linux distro? That would
> be RedHat, Fedora or a number of others? In that case, SELinux may be a
> "culprit". You can either (unsafely) turn Selinux off, or find some
> place that gives you information on how to "debug and fix Selinux
> permissions for various files".
> 
> --
> Mats
> > 
> > Regards,
> > Rob
> > 
> > On Mon, 4 Jun 2007 06:35:23 +0100, Mark Williamson wrote
> > > > I created a logical volume for usage by a guest OS: 
> > Windows XP. When
> > > > Windows starts the setup and comes to the partitioning 
> > part, no partition
> > > > can be created. When I hit 'C' (create partition) and 
> > provide the partition
> > > > size, setup returns to the same previous screen where I 
> > need to hit 'C'
> > > > again.. it looks like its looping..
> > > 
> > > Weird.  Could you please post your domain config file?
> > > 
> > > > Another issue is that the .iso image of Windows XP 
> > (created with `dd
> > > > if=/dev/cdrom of=/tmp/winxp.iso`) cannot be used during 
> > creation of the new
> > > > guest OS. It fails. When I provide '/dev/cdrom' the guest 
> > OS boots from cd.
> > > > I can't figure out why.
> > > 
> > > >From the real CD, presumably?  You want something like:
> > > 
> > > disk = [ 'file:/tmp/winxp.iso,hdc:cdrom,r', ... ]
> > > 
> > > in your disk list.  This'll make hdc in the guest be an 
> > emulated CD-ROM drive 
> > > holding the contents of your ISO file.
> > > 
> > > There's a boot order variable in the config, you'll need 
> > "c" to be first if 
> > > it's going to boot off the hard drive.  e.g.
> > > 
> > > boot = "cda"
> > > 
> > > will try initially to boot from the hard drive, fall back 
> > to the CD-ROM drive 
> > > if that fails, and finally try to boot from the emulated 
> > floppy drive.
> > > 
> > > > I'm running RedHat FC6 and used the Xen version shipped 
> > with FC6. I suspect
> > > > it is version 3.0. I also want to upgrade that version to 
> > 3.1 later on. The
> > > > above might be related to version 3.0?
> > > 
> > > Those issues shouldn't be a issue with your particular version.
> > > 
> > > FC6 shipped with a Xen based on 3.0.3.  Xen 3.0.1 to 3.0.4 
> > are feature 
> > > releases not just bugfixes as the numbers imply.  I have 
> > the impression that 
> > > 3.0.4 and above has better support for running HVM guests, 
> > so you may find 
> > > Windows works better if you upgrade.  3.1 is what *would* 
> > have been called 
> > > 3.0.5 in the old numbering scheme; you might want to 
> > consider upgrading to 
> > > that, although there are probably still some bugs to find 
> > in the new features 
> > > of that release :-)
> > > 
> > > Cheers,
> > > Mark
> > > 
> > > -- 
> > > Dave: Just a question. What use is a unicyle with no seat?  
> > And no pedals!
> > > Mark: To answer a question with a question: What use is a 
> > skateboard?
> > > Dave: Skateboards have wheels.
> > > Mark: My wheel has a wheel!
> > > 
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > 

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users