[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] asus P5B Delux not booting xen (ACPI problem?)


  • To: "Oliver Kowalke" <oliver.kowalke@xxxxxx>
  • From: "Chris Fanning" <christopher.fanning@xxxxxxxxx>
  • Date: Thu, 21 Jun 2007 12:52:28 +0200
  • Cc: xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Thu, 21 Jun 2007 03:50:28 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=Vv2kfNrdpfWUhgWN3Fz4HtVFidkSzr147jfxY9B7kf7hp4gEvCWrB37O0Bt/HVofI8AiBpFMKQGtyoyh+JQgTNNV7VIERl2ZA3fJPgVR329LuGol1v7+tX1hlgHk2q4tROv8weJ0rfKxCZafgOreh+YXxnJ1lUpIpqvBxAC0gEo=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi,

On 6/21/07, Oliver Kowalke <oliver.kowalke@xxxxxx> wrote:
AFAIK Etch contains already an xen kernel(s) - for instance x86-64 Package 
linux-image-xen-amd64?!

Is it possible to install xen-3.1.0 but use the debian prepared kernels?

Chris

regards, Oliver

> Hi,
>
> I'm going crazy trying to get Xen running on an ASUS P5B Delux (latest
> BIOS installed).
>
> I've tried xen-3.0.4 and xen-3.1.0 (both compiled from source)
>
> The boot process stalls with
> ACP: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (low level) -> IRQ 18
> ahci: 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports ? Gbps 0x3f impl SATA
> mode
> ahci: 0000:00:1f.2: flags: 64bit ilck stag led pmp pio
> ata1: SATA max UDMA/133 cmd 0xE102E900 ctl 0x0 bmdma 0x0 irq 18
> ata2: SATA max UDMA/133 cmd 0xE102E980 ctl 0x0 bmdma 0x0 irq 18
> ata1: port is slow to resond, please be patient
> ata1: failes to respond (30 secs)
> scsi0 :ahci
> ata2: port is slow to resond, please be patient
> ata2: failes to respond (30 secs)
>
> booting xen-3.1.0 adds some more info to the failure:
> ata1: SATA link up 3,0 Gpb (SStatus 123 Scontrol 200)
> ata1: qc timeout (cmd 0xec)
> ata1: failed to identify (I/0 error, err_mask = 0x0104)
> ata1: port is slow to resond, please be patient
> ata1: failes to respond (30 secs)
> ata1: COMRESET failed, device not ready
> ata1: hardreset failded
>
> But this doesn't always happen. 50% of the time, the process stalls
> for about 6 secs on
> ACP: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (low level) -> IRQ 18
> And then continues correctly.
>
> I've tried passing acpi=off to the kernel but this results in
> ExtINT not setpup in hardware but reported by MP table.
>
> When I boot this machine with vanilla debian etch, there are no problems.
>
> Any ideas?
> Thanks.
> Chris.
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

--
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kanns mit allen: http://www.gmx.net/de/go/multimessenger


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.