[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-users] Xen as virtual KVM
- To: "Mark Williamson" <mark.williamson@xxxxxxxxxxxx>
- From: "Brandon Reno" <brandonreno@xxxxxxxxx>
- Date: Tue, 26 Jun 2007 13:15:48 -0500
- Cc: "Petersson, Mats" <Mats.Petersson@xxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx
- Delivery-date: Tue, 26 Jun 2007 11:13:57 -0700
- Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:cc:in-reply-to:mime-version:content-type:references; b=p9fHliZpOJW6iBiNrQrWbS5pmwn/W9XWV1GMA2hH4O8qTTbJtCv0DqkGn5E24AXW7mEN36RNYaU3EgXMzzcFnNHnAmKaQgVTOapXhVijIrcXxFvGbv440eAfymZtgZy29nbEFC5I6UdtozFQNxqCmKpaz4vUW2uG9hVhf8tI5y0=
- List-id: Xen user discussion <xen-users.lists.xensource.com>
Pretty good idea, the original theory was to have the dom0 "invisible" to the end-user, but I think that this would work well enough. Even if the virtual framebuffer doesn't support full screen, it would be possible to do this with either VNC or simple XDM/Rdesktop.
It would work 'well enough' for our purposes at this time, and if I really need high performance video, I can always do it within the dom0.
I'll keep an eye out for the expanded support for HVMs and PCI-passthrough.
On 6/26/07, Mark Williamson <mark.williamson@xxxxxxxxxxxx> wrote:
> Just so that you understand it: It's perfectly possible to use ALL > versions of OS's as HVM domains, so you could just set up your Linux and > Windows domains to use HVM all the way - the graphics may not be as
> snappy as you get on real hardware, but it's definitely usable for > testing purposes. And the advantage here is that you don't need any > "messing about", and you can even leave all of them running at once and
> just click on the task-bar for which one you want to run at any given > time (or run several in parallel - you just can't see all of them if you > don't have a HUGE display on Dom0).
In fact, you could try running a virtual machine display full screen on each
virtual desktop, then switch between them using ctrl+alt+left/right - that way you can have a different OS on each side of a cube (and be able to zoom out and look at all of them at once).
Cheers, Mark
> -- > Mats > > > On 6/26/07, Petersson, Mats <Mats.Petersson@xxxxxxx> wrote: > > > -----Original Message----- > > > From:
xen-users-bounces@xxxxxxxxxxxxxxxxxxx > > > [mailto: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > > > <mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx> ] On Behalf Of > > > > > Brandon Reno > > > Sent: 26 June 2007 15:28
> > > To: xen-users@xxxxxxxxxxxxxxxxxxx > > > Subject: [Xen-users] Xen as virtual KVM > > > > > > I'm looking at doing something that may seem a little bit
> > > odd, I would like to use xen to virtualize several desktop > > > environments, with a specific keystroke configured to switch > > > to that environment. > > > I will have either gentoo or debian as a dom0. this will be
> > > used only for management of the virtual machines. > > > I will have several full desktop environments for > > > > different users. > > > > > For example, I will be using Gentoo with KDE/Beryl (soon to
> > > be Fusion or whatever they are changing their name to) > > > I'd like to have a test environment for various trials of > > > different other flavours and for development
> > > Additionally, I will be buying a new computer, supporting > > > AMD-V, will want to have 3 additional environments, Windows > > > XP and Vista, for application testing, and one
> > > > Windows DE for my Wife. > > > > > To accellerate as much as possible the different > > > environments, I would need to setup the PCI video card to > > > passthrough to whichever domU is active. It is not necessary
> > > for more than one environment to be active and running at any > > > given time. > > > My theory is to simply configure each environment to pass > > > through the video card, and drop one environment (suspend?),
> > > and switch to the next. Do you see any problems with this > > > configuration, or have any advice? > > > > You can do it with VNC/SDL in fully-virtual domains
> > with a virtual > > graphics card. That's a (nearly) no-brainer. > > > > But unless you have at least two graphics cards in the > > machine, Dom0 > > will need to own the graphics card - it uses the VGA as
> > console during > > startup at the very least. So you need a second > > graphics card to start > > with. I've seen complaints that pass-through of > > graphics doesn't work,
> > but don't take my word for it. > > > > Using PCI passthrough, you would definitely have to > > suspend ("xm save") > > the domain and resume another ("xm resstore") when
> > switching from one > > domain to another. Note that this takes several seconds > > per save/restore > > cycle for any reasonable size domain - just writing > > 128MB to the disk at
> > 50MB/s takes 2.5s or so, and there is more work than > > this involved in > > the save-process. > > > > HVM domains (Windows for example) can't use PCI
> > passthrough, at all, at > > this time (there's work to allow ONE instance of > > Windows to do that - > > but that's still some way off, and I wouldn't rely on > > this for the next
> > 3-6 months at least, although I'm not sure how far off > > it really is). > > > > > Additionally, I would need to write a program or series of > > > scripts to manage the switching of DEs, which doesn't seem to
> > > be too much of a problem, except that it would need to > > > capture a few specific keystrokes (i.e. win+f1 thru win+f5) > > > to actually call the switch. > >
> > Why? What's wrong with clicking buttons/menus or typing > > into a window > > someplace? > > > > > I'm not sure where I would need to start to do this should
> > > this program monitor /dev/input for the keypress, or would > > > this need to go into the hypervisor? > > > > That's a good question - Dom0 doesn't (strictly) own
> > the keyboard, but > > you'd certainly have an easier task intercepting this > > in Dom0 than you'd > > have in the Hypervisor, since the hypervisor won't > > actually be able to
> > make the switch happen anyways, so you NEED to get to > > Dom0 someway > > anywyas to achieve this. > > > > -- > > Mats > > > > > I currently have a few VMs on my server computer running
> > > things like a webserver, samba share, Kerberos > > > Authentication, etc. and have been very happy with xen. I'd > > > like to take the chance to document my findings on this
> > > unique setup in case someone else would be interested. > > > > > > Any advice would be appreciated, or better yet, if someone > > > has done something like this, I'd like to hear about their
> > > successes/failures. > > > Thanks, > > > Brandon Reno > > _______________________________________________ > Xen-users mailing list >
Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users
-- Dave: Just a question. What use is a unicyle with no seat? And no pedals!
Mark: To answer a question with a question: What use is a skateboard? Dave: Skateboards have wheels. Mark: My wheel has a wheel!
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|