[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [Xen-users] Gutsy Xen 3.1 2.6.22-9-xen network-bridge problem



I had the same problem. It’s a checksum problem I guess. (was in my case)

 

http://lists.xensource.com/archives/html/xen-users/2006-05/msg00817.html

 

this might help (hopefully)

 

 


Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Emre Erenoglu
Gesendet: Freitag, 17. August 2007 12:11
An: xen-users@xxxxxxxxxxxxxxxxxxx
Betreff: [Xen-users] Gutsy Xen 3.1 2.6.22-9-xen network-bridge problem

 

Hi,

 

I have a strange problem with my networking setup. I read all forums around the world where people had similar problems, but couldn't find a solution.

 

I have an Attansic L1 gigeth chip on my mainboard. This chip works OK in stock Ubuntu Gutsy (development) 2.6.22-9-generic kernel.

 

When I boot into Xen, and after the bridge is created, the network stops working. Some info:

 

- If I do " /etc/xen/scripts/network-bridge stop "  then the network comes back...

- I can ping sites, but can never "communicate" with them. For example, I can "telnet" to 22th port of an sshd server, receive the "welcome to xyz sshd server etc." but can never send any command. Same for telnet/http/ftp connections. The system also cannot resolve DNS names, but can still ping. Same thing happens inside the DomUs.

- My /etc/xen/xend-config.sxp has " (network-script network-bridge) " and " (vif-script vif-bridge) " directives.

 

ifconfig -a output:

 

eth0      Link encap:Ethernet  HWaddr 00:18:F3:9D:6E:FC
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask: 255.255.255.0
          inet6 addr: fe80::218:f3ff:fe9d:6efc/64 Scope:Link
          UP BROADCAST RUNNING  MTU:1500  Metric:1
          RX packets:17016 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20307 errors:0 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000
          RX bytes:6377107 (6.0 MB)  TX bytes:9225065 (8.7 MB)

 

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:636 errors:0 dropped:0 overruns:0 frame:0
          TX packets:636 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:11732 (11.4 KB)  TX bytes:11732 ( 11.4 KB)

 

veth0     Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:18 errors:0 dropped:0 overruns:0 frame:0
          TX packets:38 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:3614 (3.5 KB)  TX bytes:18219 (17.7 KB)

 

veth1     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

veth2     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

veth3     Link encap:Ethernet  HWaddr 00:00:00:00:00:00
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

vif0.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST NOARP  MTU:1500  Metric:1
          RX packets:38 errors:0 dropped:0 overruns:0 frame:0
          TX packets:19 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:18219 (17.7 KB)  TX bytes:3684 (3.5 KB)

 

vif0.1    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

vif0.2    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

 

vif0.3    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)


 

 

When I run  "  network-bridge start ", the xenbr0 interface is created, brctl shows the bridge is created with two interfaces inside. But, network doesn't work. It seems that I can receive packets but not send.

 

Syslog shows:

 

atl1 0000:03:00.0: Unable to enable MSI: -1
atl1 0000:03:00.0: eth0 link is up 100 Mbps full duplex
eth0: no IPv6 routers present
device vif0.0 entered promiscuous mode
audit(1187308448.174:7): dev=vif0.0 prom=256 old_prom=0 auid=4294967295
xenbr0: port 1(vif0.0) entering learning state
atl1 0000:03:00.0: Unable to enable MSI: -1
atl1 0000:03:00.0: peth0 link is up 100 Mbps full duplex
xenbr0: topology change detected, propagating
xenbr0: port 1(vif0.0) entering forwarding state
device peth0 entered promiscuous mode
audit(1187308449.198 :8): dev=peth0 prom=256 old_prom=0 auid=4294967295
xenbr0: port 2(peth0) entering learning state
xenbr0: topology change detected, propagating
xenbr0: port 2(peth0) entering forwarding state

 

Do you have any idea what is causing this? I can give more information if requested. (can't issue the network-bridge start command now as it will disconnect me from the machine if I do so, I'm remotely connected at the moment)

 

P.S. I tried also with a USB ethernet card, same result.

 

Thanks for any insight,

 

Best regards,

 

Emre

 


 


 


--
Emre Erenoglu
erenoglu@xxxxxxxxx

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.