[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] weird mtu problem with xen3.1 + bonding



Hi list,

[Second try, couldn't find my original posting in the archives so it might have been eaten by a spamfilter]

I'm experiencing a weird problem which seems to be caused by the network layer. What happens is that our domU is sending out ethernet frames with sizes >MTU, which is not supposed to happen.

The setup is as follows:


peth0 \              /  vif0.0 -- dom0
       bond0 -- bobr0
peth1 /              \  vifN.0 -- domU

where bond0 is a HA bonding interface, and bobr0 is a bridge.


All these interfaces have mtu <= 1500 in both the dom0 and domU, and no MTUs set for specific routes, so I'd expect frames coming from those interfaces to behave nicely.

Versions:  xen 3.1.0
Dom0 kernel: 2.6.18-xen [from xen-3.1.0-install-x86_32p.tgz]
DomU kernel: 2.6.18-xen [the same]

I've tried lowering all MTUs in the system, but I can't seem to be getting it to work.

Anyone with good ideas?

Cheers,

Jasper
--
Jasper Spaans                                          http://jasper.es/
   11:59 up 11160 days, 2:46, 1 users, load averages: 6.00 6.00 6.02
             This line was last modified 0 seconds ago.




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.