[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Problem using 2 nics and 2 bridges


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Razi Khaja" <razi.khaja@xxxxxxxxx>
  • Date: Sat, 27 Oct 2007 21:02:57 -0400
  • Delivery-date: Sat, 27 Oct 2007 18:03:45 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:message-id:date:from:to:subject:in-reply-to:mime-version:content-type:content-transfer-encoding:content-disposition:references; b=sN62mI6EaI1uLvagVJzRPS+CcrkIbQDfBmobkMkccerBuVnQ/wXC/Z7K5TjEzhlfR4dfgs46oOe/8UpQUXJeu11Qd6pDF2Io4F9IzQmbWFY86mPPLy+FlLlKx01Hz39jrn71dIfI+mdOoNFasKixg0n9/K8LBqylf4vxy3SFxNs=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

I had this problem on opensuse 10.2 as well.   I was following the
HOWTO at http://en.opensuse.org/Xen3_yet_another_Virtual_Network_Concept
I could ssh from dom0 into a domU, but once I was in a domU i could
not ssh into dom0 or any other machine, nor could I get access to
websites.  I suppose this confirms that a networking problem exists in
10.2, but not what the problem is.

After upgrading to 10.3 (yesterday) and installing a virtual machine
my networking problems disappear. I can ssh from a domU to dom0 and
can view web pages.  If your hangup is networking you might consider
trying opensuse 10.3.

Razi

On 10/27/07, Harry Kappelbauer <kappelbauer@xxxxxxxx> wrote:
> Hi,
>
> i have some problems creating a second bridge for my second nic.
> I'm using the following script (two-bridges):
> ...................................................................................................................................
> #!/bin/bash
>
> XENDIR="/etc/xen/scripts"
>
> $XENDIR/network-bridge "$@" netdev=eth0 bridge=xenbr0 vifnum=0
> $XENDIR/network-bridge "$@" netdev=eth1 bridge=xenbr1 vifnum=1
> ...................................................................................................................................
>
> And patched xend-config.sxp like this: (network-script two-bridges).
>
> xend creates both bridges, but when call »brctl show« both bridges are using 
> the same bridge id
> (the nics seem to be assigned correctly)!
>
> I can ping the ips assigned in dom0 but nothing else. The domU has no working 
> network.
> When i check my routing table (»ip route show«) the listing is quite slow but 
> looks okay?
> Does anybody know, what's going wrong?
> My system is SuSE 10.2 with xen 3.3.
>
>
> Thanks!
>
> Harry
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.