On Nov 8, 2007 1:42 AM, admin@xxxxxxx <admin@xxxxxxx> wrote:
Correction:
I want to get away from Win4lin and use VMWARE, and would appreciate a
comparison in a few lines if you have it handy.
Should READ
I want to get away from Win4lin and VMWARE, and would appreciate a
comparison with XEN in a few lines if you have it handy.
You need to have support for HVM in your processor. Since you don't
mention anything about it, I take that you're not knowing whether your
processor supports it or not... If you do a xm dmesg | grep -i vmx
from your dom0 and it doesn't give you anything, chances are that your
processor doesn't support HVM.
regards
Peter
admin@xxxxxxx wrote:
I searched the archives but could not find a concise HOWTO for
installing ME or XP as guest on FC7 as host.
Note: I have XEN running on FC7 and it flashes the XEN banner at
machine boots up, so the Kermnel is enabled.
I tried to work from this
"http://www.broermann.com/howto_amd_hvm.html"
but it was pretty vague.
If someone can point me to a HOWTO I would greatly appreciate it.
I want to get away from Win4lin and use VMWARE, and would appreciate a
comparison in a few lines if you have it handy.
ALSO:
Is there out of the box tcp/ip support through the host (like win4lin?)
Which periferals works. serial ports? parallel ports usb?
Thanks.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
