[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] domU freezes solid after startup -- why?
Mitch Kelly wrote: > xm list to get the name of it > xm console NAMEHERE to attach its console Thanks. When I did the above, I discovered that the console output had frozen at a particular point. Nothing more happened after that. I went and did other things for about FOUR HOURS, and when I returned and looked at the console output, there was still no further output. See the attached file. The last two lines of console output happened after I did an "xm shutdown" on the domU. Any ideas as to why my domU is hanging like this? What sorts of diagnostic measures should I try next? -- Rich Wales === Palo Alto, CA, USA === richw@xxxxxxxxx http://www.richw.org === http://en.wikipedia.org/wiki/User:Richwales [ 0.000000] Linux version 2.6.22-14-xen (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Mon Oct 15 00:35:38 GMT 2007 (Unofficial) [ 0.000000] Reserving virtual address space above 0xf5800000 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 0000000018800000 (usable) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 392MB LOWMEM available. [107074.653855] Zone PFN ranges: [107074.653858] DMA 0 -> 100352 [107074.653860] Normal 100352 -> 100352 [107074.653862] HighMem 100352 -> 100352 [107074.653864] early_node_map[1] active PFN ranges [107074.653866] 0: 0 -> 100352 [107074.666315] ACPI in unprivileged domain disabled [107074.666892] Allocating PCI resources starting at 20000000 (gap: 18800000:e7800000) [107074.666976] Built 1 zonelists. Total pages: 99568 [107074.666981] Kernel command line: root=/dev/hda1 ro [107074.667205] Enabling fast FPU save and restore... done. [107074.667210] Enabling unmasked SIMD FPU exception support... done. [107074.667213] Initializing CPU#0 [107074.667382] PID hash table entries: 2048 (order: 11, 8192 bytes) [107074.667416] Xen reported: 2162.726 MHz processor. [107074.667450] Console: colour dummy device 80x25 [107074.667811] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [107074.668065] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [107074.668159] Software IO TLB disabled [107074.668166] vmalloc area: d9000000-f53fe000, maxmem 2d800000 [107074.676922] Memory: 364160k/401408k available (2071k kernel code, 28912k reserved, 926k data, 200k init, 0k highmem) [107074.676947] virtual kernel memory layout: [107074.676948] fixmap : 0xf568f000 - 0xf57ff000 (1472 kB) [107074.676949] pkmap : 0xf5400000 - 0xf5600000 (2048 kB) [107074.676951] vmalloc : 0xd9000000 - 0xf53fe000 ( 451 MB) [107074.676952] lowmem : 0xc0000000 - 0xd8800000 ( 392 MB) [107074.676953] .init : 0xc03f3000 - 0xc0425000 ( 200 kB) [107074.676955] .data : 0xc0305cfe - 0xc03ed544 ( 926 kB) [107074.676956] .text : 0xc0100000 - 0xc0305cfe (2071 kB) [107074.676978] Checking if this processor honours the WP bit even in supervisor mode... Ok. [107074.677041] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [107074.743166] Calibrating delay using timer specific routine.. 4328.01 BogoMIPS (lpj=8656021) [107074.743249] Security Framework v1.0.0 initialized [107074.743280] SELinux: Disabled at boot. [107074.743320] Mount-cache hash table entries: 512 [107074.743503] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [107074.743536] CPU: L2 Cache: 256K (64 bytes/line) [107074.743573] Compat vDSO mapped to f57fe000. [107074.743604] Checking 'hlt' instruction... OK. [107074.743794] SMP alternatives: switching to UP code [107074.744113] Freeing SMP alternatives: 11k freed [107074.744274] Early unpacking initramfs... done [107074.790533] Brought up 1 CPUs [107074.791368] NET: Registered protocol family 16 [107074.793578] Brought up 1 CPUs [107074.793646] PCI: Fatal: No config space access function found [107074.793672] PCI: setting up Xen PCI frontend stub [107074.794253] ACPI: Interpreter disabled. [107074.794310] Linux Plug and Play Support v0.97 (c) Adam Belay [107074.794349] pnp: PnP ACPI: disabled [107074.794894] xen_mem: Initialising balloon driver. [107074.797585] Setting mem allocation to 393216 kiB [107074.797816] PCI: System does not support PCI [107074.797851] PCI: System does not support PCI [107074.797908] NET: Registered protocol family 8 [107074.797934] NET: Registered protocol family 20 [107074.798533] NET: Registered protocol family 2 [107074.798603] Time: xen clocksource has been installed. [107074.829006] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [107074.829074] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [107074.829311] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [107074.829488] TCP: Hash tables configured (established 16384 bind 16384) [107074.829496] TCP reno registered [107074.841100] checking if image is initramfs... it is [107074.910132] Freeing initrd memory: 20260k freed [107074.910643] audit: initializing netlink socket (disabled) [107074.910701] audit(1197856264.162:1): initialized [107074.912802] VFS: Disk quotas dquot_6.5.1 [107074.912966] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [107074.913196] io scheduler noop registered [107074.913236] io scheduler anticipatory registered [107074.913261] io scheduler deadline registered [107074.913300] io scheduler cfq registered (default) [107074.945539] Real Time Clock Driver v1.12ac [107074.946265] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [107074.946559] input: Macintosh mouse button emulation as /class/input/input0 [107074.946701] xencons_init: Initializing xen vfb; pass xencons=tty to prevent this [107074.947127] Xen virtual console successfully installed as xvc0 [107074.947298] Event-channel device installed. [107074.971134] netfront: Initialising virtual ethernet driver. [107074.972961] xen-vbd: registered block device major 3 [107074.973056] blkfront: hda1: barriers enabled [107074.974466] blkfront: hda2: barriers enabled [107074.978758] netfront: device eth0 has copying receive path. [107074.981180] PNP: No PS/2 controller found. Probing ports directly. [107074.982073] i8042.c: No controller found. [107074.982236] mice: PS/2 mouse device common for all mice [107074.982435] TCP cubic registered [107074.982495] NET: Registered protocol family 1 [107074.982561] Using IPI No-Shortcut mode [107074.982655] XENBUS: Device with no driver: device/console/0 [107074.982940] Freeing unused kernel memory: 200k freed [107075.330419] AppArmor: AppArmor initialized<5>audit(1197856264.582:2): type=1505 info="AppArmor initialized" pid=1092 [107075.342990] fuse init (API version 7.8) [107075.352295] Failure registering capabilities with primary security module. [107075.397589] thermal: Unknown symbol acpi_processor_set_thermal_limit [107075.416249] device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@xxxxxxxxxx [107075.895238] kjournald starting. Commit interval 5 seconds [107075.895389] EXT3-fs: mounted filesystem with ordered data mode. [107076.744868] Adding 1048568k swap on /dev/hda2. Priority:-1 extents:1 across:1048568k [107076.877100] EXT3 FS on hda1, internal journal [121776.847027] xenbus_dev_shutdown: device/console/0: Initialising != Connected, skipping [121776.852433] System halted. _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |