[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] my domU from jailtime.org using latests xen kernel freezees


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "David Hláčik" <david@xxxxxxxxx>
  • Date: Thu, 22 May 2008 13:34:47 +0200
  • Delivery-date: Thu, 22 May 2008 04:35:22 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hello, i will describe my approach
 
1) I have downloaded Centos5-64bit xen image from jailtime.org
2) I have created own swap image with 512MB file size
3) I have used same as dom0 kernel 2.6.18-53.1.19.el5xen
4) I have mounted my image file and copied /lib/modules/2.6.18-53.1.19.el5xen
5) I have created custom ramdisk for domU with mkinitrd --with=xennet --preload=xenblk /boot/initrd-2.6.18-53.1.19.el5xen.domU.img `uname -r` (uname -r = 2.6.18-53.1.19.el5xen)
6) Here comes my config file :
 
kernel = "/boot/vmlinuz-2.6.18-53.1.19.el5xen"
ramdisk = "/boot/initrd-2.6.18-53.1.19.el5xen.domU.img"

memory = 512
name = "webdev"
 
vcpus = 2
 
vif = [ '' ]

disk = [ 'tap:aio:/home/xen/webdev/webdev_root.img,sda1,w', 'tap:aio:/home/xen/webdev/webdev_swap.img,sda2,w' ]
 
 
root = "/dev/sda1 ro"
 
7) when i will run domU machine using xm create webdev_config.xen -c , it will start booting
but it will got freeze , exactly at step after starting crond
 
Using config file "./webdev_config.xen".
Started domain webdev_labs_polarion_com
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1211455944.113:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 496E59E526CA1803
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Bootdata ok (command line is root=/dev/sda1 ro )
Linux version 2.6.18-53.1.19.el5xen (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Wed May 7 08:51:05 EDT 2008
BIOS-provided physical RAM map:
 Xen: 0000000000000000 - 0000000020800000 (usable)
No mptable found.
Built 1 zonelists.  Total pages: 133120
Kernel command line: root=/dev/sda1 ro
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 2387.998 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Software IO TLB disabled
Memory: 499712k/532480k available (2358k kernel code, 23900k reserved, 1325k data, 172k init)
Calibrating delay using timer specific routine.. 5973.11 BogoMIPS (lpj=11946225)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
(SMP-)alternatives turned off
Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 377A0 could not acquire Mutex [2] [20060707]
ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread 377A0 could not acquire Mutex [2] [20060707]
Initializing CPU#1
migration_cost=2742
Brought up 2 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1211455944.113:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 496E59E526CA1803
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/2049
XENBUS: Device with no driver: device/vbd/2050
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Write protecting the kernel read-only data: 445k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Registering block device major 8
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading raid1.ko module
md: raid1 personality registered for level 1
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
register_blkdev: cannot get major 8 for sd
Loading libata.ko module
Loading ata_piix.ko module
Loading pata_marvell.ko module
Loading dm-mod.ko module
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@xxxxxxxxxx
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
netfront: device eth0 has flipping receive path.
Waiting for driver initialization.
Scanning and configuring dmraid supported devices
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  No volume groups found
Activating logical volumes
  Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
INIT: version 2.86 booting
  Welcome to  CentOS release 5 (Final)
  Press 'I' to enter interactive startup.
Setting clock : Thu May 22 07:32:31 EDT 2008 [  OK  ]
Starting udev: [  OK  ]
Setting hostname localhost.localdomain:  [  OK  ]
DM multipath kernel driver not loaded
No devices found
Setting up Logical Volume Management:   No volume groups found
[  OK  ]
Checking filesystems
Checking all file systems.
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
/dev/sda1: clean, 19482/128256 files, 110482/256256 blocks
[  OK  ]
Remounting root filesystem in read-write mode:  [  OK  ]
Mounting local filesystems:  [  OK  ]
Enabling /etc/fstab swaps:  [  OK  ]
INIT: Entering runlevel: 3
Entering non-interactive startup
Bringing up loopback interface:  [  OK  ]
Bringing up interface eth0: 
Determining IP information for eth0... failed.
[FAILED]
Starting system logger: [  OK  ]
Starting kernel logger: [  OK  ]
Starting sshd: [  OK  ]
Starting crond: [  OK  ]
 
 
Thanks for help!

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.