I am trying to create a para-virtualized guest with the same
kernel image and initrd image as dom0.
The configuration is below
================================================================================
kernel = "/boot/vmlinuz-2.6.21.7-3.fc8xen"
ramdisk = "/boot/initrd-2.6.21.7-3.fc8xen.img"
memory = 428
name = "fedora.fc8"
vif = [ '' ]
dhcp = ""
disk =
['tap:aio:/var/lib/xen/images/fedora.fc8.img,xvda1,w',
'tap:aio:/var/lib/xen/images/fedora.swap,xvda2,w']
root = "/xvda1 ro"
================================================================================
The file system and swap images are downloaded from
jailtime.org.
But while creating a domain the guest crashes and here is
what it has to say
=========================================================================================================================
[root@localhost Desktop]# xm create
fedora.fc8.xen3.cfg -c
Using config file "./fedora.fc8.xen3.cfg".
Started domain fedora.fc8
Linux version 2.6.21.7-3.fc8xen
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070925 (Red Hat
4.1.2-33)) #1 SMP Thu Mar 20 14:58:12 EDT 2008
Command line: root=/dev/sda1 ro
ip=:1.2.3.4::::eth0:
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000001b400000
(usable)
end_pfn_map = 111616
Zone PFN ranges:
DMA 0 -> 111616
DMA32 111616 -> 111616
Normal 111616 -> 111616
early_node_map[1] active PFN ranges
0: 0 -> 111616
No mptable found.
PERCPU: Allocating 26496 bytes of per cpu
data
Built 1 zonelists. Total pages: 106528
Kernel command line: root=/dev/sda1 ro
ip=:1.2.3.4::::eth0:
Initializing CPU#0
PID hash table entries: 2048 (order: 11,
16384 bytes)
Xen reported: 2657.322 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536
(order: 7, 524288 bytes)
Inode-cache hash table entries: 32768
(order: 6, 262144 bytes)
Software IO TLB disabled
Memory: 416380k/446464k available (2265k
kernel code, 21224k reserved, 1351k data, 200k init)
Calibrating delay using timer specific
routine.. 5318.18 BogoMIPS (lpj=2659094)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering secondary
module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
Brought up 1 CPUs
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function
found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam
Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver
usbfs
usbcore: registered new interface driver
hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by
default
NET: Registered protocol family 2
IP route cache hash table entries: 4096
(order: 3, 32768 bytes)
TCP established hash table entries: 16384
(order: 6, 393216 bytes)
TCP bind hash table entries: 16384 (order:
6, 262144 bytes)
TCP: Hash tables configured (established
16384 bind 16384)
TCP reno
registered
checking if image is initramfs... it is
Freeing initrd memory: 7896k freed
audit: initializing netlink socket
(disabled)
audit(1213240841.239:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order
0, 4096 bytes)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version:
0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave
Jones
RAMDISK driver initialized: 16 RAM disks of
16384K size 4096 blocksize
input: Macintosh mouse button emulation as
/class/input/input0
Xen virtual console successfully installed
as xvc0
Linux version 2.6.21.7-3.fc8xen
(mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070925 (Red Hat
4.1.2-33)) #1 SMP Thu Mar 20 14:58:12 EDT 2008
Command line: root=/dev/sda1 ro
ip=:1.2.3.4::::eth0:
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 000000001b400000
(usable)
end_pfn_map = 111616
Zone PFN ranges:
DMA 0 -> 111616
DMA32 111616 -> 111616
Normal 111616 -> 111616
early_node_map[1] active PFN ranges
0: 0 -> 111616
No mptable found.
PERCPU: Allocating 26496 bytes of per cpu
data
Built 1 zonelists. Total pages: 106528
Kernel command line: root=/dev/sda1 ro
ip=:1.2.3.4::::eth0:
Initializing CPU#0
PID hash table entries: 2048 (order: 11,
16384 bytes)
Xen reported: 2657.322 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536
(order: 7, 524288 bytes)
Inode-cache hash table entries: 32768
(order: 6, 262144 bytes)
Software IO TLB disabled
Memory: 416380k/446464k available (2265k
kernel code, 21224k reserved, 1351k data, 200k init)
Calibrating delay using timer specific
routine.. 5318.18 BogoMIPS (lpj=2659094)
Security Framework v1.0.0 initialized
SELinux: Initializing.
selinux_register_security: Registering
secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
Brought up 1 CPUs
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: Fatal: No config space access function
found
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam
Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new interface driver
usbfs
usbcore: registered new interface driver
hub
usbcore: registered new device driver usb
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by
default
NET: Registered protocol family 2
IP route cache hash table entries: 4096
(order: 3, 32768 bytes)
TCP established hash table entries: 16384
(order: 6, 393216 bytes)
TCP bind hash table entries: 16384 (order: 6,
262144 bytes)
TCP: Hash tables configured (established
16384 bind 16384)
TCP reno
registered
checking if image is initramfs... it is
Freeing initrd memory: 7896k freed
audit: initializing netlink socket
(disabled)
audit(1213240841.239:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order
0, 4096 bytes)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version:
0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.102 (c) Dave
Jones
RAMDISK driver initialized: 16 RAM disks of
16384K size 4096 blocksize
input: Macintosh mouse button emulation as
/class/input/input0
Xen virtual console successfully installed
as xvc0
Event-channel device installed.
usbcore: registered new interface driver
hiddev
usbcore: registered new interface driver
usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID
core driver
PNP: No PS/2 controller found. Probing
ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver:
device/vbd/2049
XENBUS: Device with no driver:
device/vbd/2050
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver:
device/console/0
drivers/rtc/hctosys.c: unable to open rtc
device (rtc0)
Freeing unused kernel memory: 200k freed
Write protecting the kernel read-only data:
981k
Red Hat nash version 6.0.19 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhci-hcd.ko module
USB Universal Host Controller Interface
driver v3.0
Loading mbcache.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading libata.ko module
Loading ata_piix.ko module
Waiting for driver initialization.
Loading ata_generic.ko module
Loading pata_marvell.ko module
Waiting for driver initialization.
Creating root device.
Mounting root filesystem.
mount: could not find filesystem
'/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file
or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such
file or directory
setuproot: error mounting /sys: No such
file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or
directory
Booting has failed.
Kernel panic - not syncing: Attempted to
kill init!
=========================================================================================================================
Looks like it is not able to find root file system to mount.
Thx,
Venkat
================================
Venkata
Kumar Duvvuru,
LSI
Engenio,
Adv.
Development,
Bangalore.
Mob:
+91-9880318542
Off :
+91-80-41978700 ( Extn : 3544 )
================================
