Re: [Xen-users] Xen Questions

[Janusz Ulanowski <janul666@xxxxxxxxx>]

Pablo Scheri wrote:
> Dear All,
> Hello, this is my first message in this and any mailing-list.
> The problem is as follows:
> I have an old PC (P3 550MHz, 384MB of RAM and 20GB of disk space) the issue
> is that with the LinuxÂs original kernel I detect all the Hardware
> correctly. I followed an installation guide from www.howtoforge.com for
> installed XEN 3.1.0 in Debian etch, when I finished installing the new
> kernel and booting, the system detects only 350MB of RAM, is that correct? I
> think that is correct to be subtracted the ram I assign to my VM when they
> are activated, but, is it correct to lose these 34MB without doing anything?
> If I run a Xen-list command, it tells me that the dom0 is consuming 200MB of
> ram, is that correct?
>
> Beyond this I want to mount a small network with them, all within the same
> physical PC with 3 VM, one that is my internet firewall (xen1), another one
> in the DMZ (xen2) and a third one in my lan (xen3) . The phisical PC has 2
> nics, the question is how do I allow the "xen1" VM to get the DHCP address
> from my ISP, and not to get the public IP in my dom0. And how do I
> specifically add a single virtual Nic to "xen1" VM to be allowed to generate
> the DMZ with the "xen2" VM.
>
> Thank you very much.
>
> Greetings.
>
> Pablo.-
>   
what's "xm info" showing ?

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users