[Xen-users] Xen Questions

[Pablo Scheri <pabloscheri@xxxxxxxxxxx>]

Dear All,
Hello, this is my first message in this and any mailing-list.
The problem is as follows:
I have an old PC (P3 550MHz, 384MB of RAM and 20GB of disk space) the issue
is that with the LinuxÂs original kernel I detect all the Hardware
correctly. I followed an installation guide from www.howtoforge.com for
installed XEN 3.1.0 in Debian etch, when I finished installing the new
kernel and booting, the system detects only 350MB of RAM, is that correct? I
think that is correct to be subtracted the ram I assign to my VM when they
are activated, but, is it correct to lose these 34MB without doing anything?
If I run a Xen-list command, it tells me that the dom0 is consuming 200MB of
ram, is that correct?

Beyond this I want to mount a small network with them, all within the same
physical PC with 3 VM, one that is my internet firewall (xen1), another one
in the DMZ (xen2) and a third one in my lan (xen3) . The phisical PC has 2
nics, the question is how do I allow the "xen1" VM to get the DHCP address
from my ISP, and not to get the public IP in my dom0. And how do I
specifically add a single virtual Nic to "xen1" VM to be allowed to generate
the DMZ with the "xen2" VM.

Thank you very much.

Greetings.

Pablo.-
-- 
View this message in context: 
http://www.nabble.com/Xen-Questions-tp18175548p18175548.html
Sent from the Xen - User mailing list archive at Nabble.com.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users