Todd Deshane wrote:
Hi,
For example right now my domU won't boot off the hard disk. I experimented
by removing the hard drive from the disk line. The result was the same. So
now I do not know if the bios can't see my hard drive or it just can't boot
my hard drive. A simple list of detected sata drives would save me loads of
time.
For HVM guests, there is quite a bit of information logged to
/var/log/xen/qemu* logs.
Do you see anything there that might help?
Also, could you post your domU config file, and as suggested by Jerry Amundson:
log file entries, stdout messages, etc? These really do help in
debugging the situation.
Also, you didn't mention your version of Xen, how it was installed,
your kernel versions etc.
A quick comment on your general comments on Xen: Xen already has a lot
of attention from
a lot of people. The distros, and other big third parties have taken
Xen under their wing and
there are a lot of really professional software on and around Xen.
I would recommend taking a look at the xen.org site, which is
currently under re-design, but
will still give you a better sense of where Xen is and, where it has
been, and where it is going.
Hope that helps,
Cheers,
Todd
Hey thanks for the response. I was sending the information but this is
the first email that seems to have hit the list. Such goes the way of
things, none the less I'll compile all the information.
mpower@dodtsair:/$ uname -a
Linux dodtsair 2.6.24-19-xen #1 SMP Wed Aug 20 21:08:51 UTC 2008 x86_64
GNU/Linux
mpower@dodtsair:/$ dpkg -S /usr/sbin/xm
xen-utils-3.2: /usr/sbin/xm
mpower@dodtsair:/$ cat /etc/issue
Ubuntu 8.04.1 \n \l
mpower@dodtsair:/$ cat /etc/xen/windows
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using
'xm create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================
import os, re
arch = os.uname()[4]
if re.search('64', arch):
arch_libdir = 'lib64'
else:
arch_libdir = 'lib'
#----------------------------------------------------------------------------
# Kernel image file.
kernel = "/usr/" + arch_libdir + "/xen/boot/hvmloader"
#kernel = "/usr/lib/xen/boot/hvmloader"
# The domain build function. HVM domain uses 'hvm'.
builder='hvm'
# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may cause out of
# memory errors. The domain needs enough memory to boot kernel
# and modules. Allocating less than 32MBs is not recommended.
memory = 2048
# Shadow pagetable memory for the domain, in MB.
# If not explicictly set, xend will pick an appropriate value.
# Should be at least 2KB per MB of domain memory, plus a few MB per
vcpu.
# shadow_memory = 8
# A name for your domain. All domains must have different names.
name = "Windows"
# 128-bit UUID for the domain. The default behavior is to generate a
new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
#-----------------------------------------------------------------------------
# The number of cpus guest platform has, default=1
vcpus=3
# Enable/disable HVM guest PAE, default=1 (enabled)
#pae=1
# Enable/disable HVM guest ACPI, default=1 (enabled)
#acpi=1
# Enable/disable HVM APIC mode, default=1 (enabled)
# Note that this option is ignored if vcpus > 1
#apic=1
# List of which CPUS this domain is allowed to use, default Xen picks
#cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0,
model=ne2k_pci' ]
# type=ioemu specify the NIC is an ioemu device not netfront
#vif = [ 'type=ioemu, bridge=eth0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
#disk = [ 'phy:hda1,hda1,r' ]
#disk = [ 'phy:/dev/sdb,hda,w',
'file:/home/mpower/windowsXP.iso,hdc:cdrom,r',
'file:/home/mpower/windows98.iso,hde:cdrom,r']
#disk = [ 'phy:/dev/sdb,hda,w', 'phy:/dev/loop1,hdc:cdrom,r',
'phy:/dev/loop0,hde:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hdc:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hdc:cdrom,r',
'phy:/dev/scd0,hde:cdrom,r']
#disk = [ 'phy:/dev/loop0,sda,w', 'phy:/dev/cdrom,hdc:cdrom,r',
'phy:/dev/scd0,hde:cdrom,r']
#disk = [ 'phy:/dev/sda,sda,w', 'phy:/dev/loop0,hdc:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hdc:cdrom,r',
'phy:/dev/cdrom2,hde:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hdc:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hda:cdrom,r',
'phy:/dev/cdrom2,hdb:cdrom,r']
#disk = [ 'phy:/dev/sdb,sda,w']
#disk = [ 'phy:/dev/sdb,sdb,w']
#disk = [ 'phy:/dev/cdrom,hda:cdrom,r']
disk = [ 'phy:/dev/sdb,sda,w', 'phy:/dev/cdrom,hda:cdrom,r']
#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits. There are three
'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each of these
you
# may specify:
#
# "destroy", meaning that the domain is cleaned up as normal;
# "restart", meaning that a new domain is started in place of
the old
# one;
# "preserve", meaning that no clean-up is done until the domain
is
# manually destroyed (using xm destroy, for
example); or
# "rename-restart", meaning that the old domain is not cleaned up,
but is
# renamed and a new domain started in its place.
#
# The default is
#
#
# on_reboot = 'restart'
# on_crash = 'restart'
#
# For backwards compatibility we also support the deprecated option
restart
#
# restart = 'onreboot' means
# on_reboot = 'restart'
# on_crash = 'destroy'
#
# restart = 'always' means
# on_reboot = 'restart'
# on_crash = 'restart'
#
# restart = 'never' means
# on_reboot = 'destroy'
# on_crash = 'destroy'
#on_reboot = 'restart'
#on_crash = 'restart'
#============================================================================
# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c), Network (n) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
boot="c"
#-----------------------------------------------------------------------------
# write to temporary files instead of disk image files
#snapshot=1
#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=1
#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0
#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc is set.
# default is to use 'vnc-listen' setting from /etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"
#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1
#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1
#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
#----------------------------------------------------------------------------
# set password for domain's VNC console
# default is depents on vncpasswd in xend-config.sxp
#vncpasswd=''
#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0
#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0
#-----------------------------------------------------------------------------
# serial port re-direct to pty deivce, /dev/pts/n
# then xm console or minicom can connect
serial='pty'
#-----------------------------------------------------------------------------
# Qemu Monitor, default is disable
# Use ctrl-alt-2 to connect
#monitor=1
#-----------------------------------------------------------------------------
# enable sound card support, [sb16|es1370|all|..,..], default none
#soundhw='sb16'
#-----------------------------------------------------------------------------
# set the real time clock to local time [default=0 i.e. set to utc]
#localtime=1
#-----------------------------------------------------------------------------
# set the real time clock offset in seconds [default=0 i.e. same as
dom0]
#rtc_timeoffset=3600
#-----------------------------------------------------------------------------
# start in full screen
#full-screen=1
#-----------------------------------------------------------------------------
# Enable USB support (specific devices specified at runtime through
the
# monitor window)
#usb=1
# Enable USB mouse support (only enable one of the following, `mouse'
for
# PS/2 protocol relative mouse, `tablet' for
# absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'
#-----------------------------------------------------------------------------
# Set keyboard layout, default is en-us keyboard.
#keymap='ja'
mpower@dodtsair:/$ cat /var/log/xen/qemu-dm-7.log
Watching /local/domain/0/device-model/7/logdirty/next-active
Watching /local/domain/0/device-model/7/command
char device redirected to /dev/pts/1
qemu_map_cache_init nr_buckets = 10000 size 3145728
shared page at pfn 7ffff
buffered io page at pfn 7fffd
Time offset set 0
Register xen platform.
Done register platform.
raw_read(7:/dev/cdrom, 0, 0x7fff633ad6c0, 512) [8388604] read failed -1
: 5 = Input/output error
raw_read(7:/dev/cdrom, 0, 0x7fff633ad6c0, 512) [8388604] retry read
failed -1 : 5 = Input/output error
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
mpower@dodtsair:/$ sudo xm create windows
Using config file "/etc/xen/windows".
Started domain Windows
mpower@dodtsair:/$ sudo xm destroy 9
Mike Power
P.S. I do not see it talking to the hard drive in the logs.
|
