[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)


  • To: Tej <bewith.tej@xxxxxxxxx>
  • From: "Yuming fang" <fangyuming.leo@xxxxxxxxx>
  • Date: Thu, 4 Sep 2008 09:38:28 +0800
  • Cc: xen-users <xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Wed, 03 Sep 2008 18:39:06 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:to:subject:cc:in-reply-to:mime-version :content-type:references; b=iKHDJLppTGYlIKfYvGRkQp4CvmpvAl9pz/c8ARBi+g6HyxVb3LNvtzk4SWtndNgGha aOTrZwY7/LiOPzCgGyrPMOPRQAs4v2OdN6m2eUmmB6pYWTqi38T9l3S0TYoxw4Tbqlv3 NMVXRgWhgAb4RMVpKXlk7P4IpfG1ZfSJQCZsA=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>



2008/9/4 Tej <bewith.tej@xxxxxxxxx>
On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@xxxxxxxxx> wrote:
> Hi, everyone,
>
> I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 successfully.
> The kernel of  dom0 is linux-2.6.18-xen0. But the Xorg could not start in
> the Dom0. When I use the "startx" command to start the X server, the error
> information is following:
>
> .........
> (==) Using config file: "etc/X11/xorg.conf"
> (II) Module already built-in
> (II) Module already built-in
> (II) Module already built-in
> (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
> (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
> (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
> (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
> (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
> (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low?
> (EE) intel(0): Couldn't allocate video memory
>
> Fatal server error:
> AddScreen/ScreenInit failed for driver 0

Try to reconfigure the xserver again using:
"sudo dpkg-reconfigure xserver-xorg"

HTH

thanks
-tej
 
 
I enter the command "sudo dpkg-reconfigure xserver-xorg", but it could not run.
The error information is:
sudo: dpkg-reconfigure: command not found
audit_log_user_command(): Conenction refused
You have new mail in /var/spool/mail/root
 
My system is linux-2.6.18-Xen0, the orginal system is Fedora8. Is there this command in the system?
thanks.
 
Yuming

>
> giveing up.
> xinit: Connection refused (errno 111): unable to connect to X server
> xinit: No such process (error 3): Server error.
>
> Did anyone face this problem when starting the Xserver? The hardware is
> Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0.
> Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007.
>
> I would appreciate it if anyone could give me some help.
>
> Yuming
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.