[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AW: [Xen-users] Shared volume: Software-ISCSI or GFS or OCFS2?



I'm not sure where or how you want to use software iSCSI - maybe you could 
provide a more thorough description of your Xen environment?

As far as OCFS vs GFS, you can use whichever you like.  I use OCFS2 for two 
reasons: first because it's included with SLES 10, and second because I find it 
slightly easier to configure than GFS.  It has its downsides, too, though, but 
works fine for me.  Use whichever cluster-aware FS you want.

-Nick
Nick Couchman
Manager, Information Technology 
-----Original Message-----
From: "Rustedt, Florian" <Florian.Rustedt@xxxxxxxxxxx>
To: Nick Couchman <Nick.Couchman@xxxxxxxxx>

Sent: 11/17/2008 2:09:13 AM
Subject: AW: [Xen-users] Shared volume: Software-ISCSI or GFS or OCFS2?

Ok?
So what's the real advantage of using "software-iscsi" then for me?
And what about GFS instead of OCFS2?
 
Kind regards, Florian

________________________________

Von: Nick Couchman [mailto:Nick.Couchman@xxxxxxxxx] 
Gesendet: Freitag, 14. November 2008 17:23
An: Rustedt, Florian
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Betreff: Re: [Xen-users] Shared volume: Software-ISCSI or GFS or OCFS2?


Well, I'm not sure it's a matter of iSCSI OR a filesystem, but that
depends on how you decide to go about setting it up.  In my environment,
I have both iSCSI and FC access to the same volumes.  Some of my servers
have FC HBAs and connect to my XEN volume that way, some of them have
hardware iSCSI HBAs, and some of them use software iSCSI initiators.  I
have three XEN volumes - one for server domUs, one for VDI domUs, and
one for development domUs.  All of these volumes are formatted with
OCFS2 so that I can mount them on all of my servers.  The domUs then use
file-based disks that reside on the shared volumes, so I can migrate
them back and forth between servers relatively easily.

You could use iSCSI to do individual volumes for each of your domUs - I
found it a bit cumbersome to have to go into either EVMS or LVM each
time I wanted to create a domU and create a volume for it, so I'm
sticking with the file-based approach.

-Nick


-----Original Message-----
From: Rustedt, Florian <Florian.Rustedt@xxxxxxxxxxx
<mailto:%22Rustedt,%20Florian%22%20%3cFlorian.Rustedt@xxxxxxxxxxx%3e> >
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Shared volume: Software-ISCSI or GFS or OCFS2?
Date: Fri, 14 Nov 2008 11:09:33 +0100


Hello list,

I want to use shared volumes between severall vm's and defenetly don't
want to use NFS or Samba!

So i have three options:
1. simulated(software-) iscsi
2. GFS
3. OCFS2

What do you suggest and why?

Kind regards, Florian
************************************************************************
**********************
IMPORTANT: The contents of this email and any attachments are
confidential. They are intended for the 
named recipient(s) only.
If you have received this email in error, please notify the system
manager or the sender immediately and do 
not disclose the contents to anyone or make copies thereof.
*** eSafe scanned this email for viruses, vandals, and malicious
content. ***
************************************************************************
**********************




________________________________

This e-mail may contain confidential and privileged material for the
sole use of the intended recipient. If this email is not intended for
you, or you are not responsible for the delivery of this message to the
intended recipient, please note that this message may contain SEAKR
Engineering (SEAKR) Privileged/Proprietary Information. In such a case,
you are strictly prohibited from downloading, photocopying, distributing
or otherwise using this message, its contents or attachments in any way.
If you have received this message in error, please notify us immediately
by replying to this e-mail and delete the message from your mailbox.
Information contained in this message that does not relate to the
business of SEAKR is neither endorsed by nor attributable to SEAKR. 

**********************************************************************************************
IMPORTANT: The contents of this email and any attachments are confidential. 
They are intended for the 
named recipient(s) only.
If you have received this email in error, please notify the system manager or 
the sender immediately and do 
not disclose the contents to anyone or make copies thereof.
*** eSafe scanned this email for viruses, vandals, and malicious content. ***
**********************************************************************************************


This e-mail may contain confidential and privileged material for the sole use 
of the intended recipient.  If this email is not intended for you, or you are 
not responsible for the delivery of this message to the intended recipient, 
please note that this message may contain SEAKR Engineering (SEAKR) 
Privileged/Proprietary Information.  In such a case, you are strictly 
prohibited from downloading, photocopying, distributing or otherwise using this 
message, its contents or attachments in any way.  If you have received this 
message in error, please notify us immediately by replying to this e-mail and 
delete the message from your mailbox.  Information contained in this message 
that does not relate to the business of SEAKR is neither endorsed by nor 
attributable to SEAKR.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.