[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded


  • To: "'Nick Couchman'" <Nick.Couchman@xxxxxxxxx>
  • From: "Venefax" <venefax@xxxxxxxxx>
  • Date: Wed, 19 Nov 2008 11:30:27 -0500
  • Cc: james.harper@xxxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
  • Delivery-date: Wed, 19 Nov 2008 08:33:24 -0800
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language :x-cr-hashedpuzzle:x-cr-puzzleid; b=m6L0lnUL/L/Lv/bCwuoW1HiQ3h78ANhAgO2iY+NO8gxEt+fmSF8yrO7HSiS03dxz2f v1tjM7jPn0iT/jqlpUyv22pRLP1BuXDJpRxzWveGWj4KgAhQ09M+osT10cBpDdT2gxMs f4NltDqHH+az5is7tBn9n0ry8LH1vfWyiCR44=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AclKYwVsjBPFWq52R16UBWUE5M+GrwAAO0tw

I found the bad link in the driver’s files and could not find it in the site. It would be worth if you could replace the bad link for the good one in the driver, as well.

 

Federico

 

From: Nick Couchman [mailto:Nick.Couchman@xxxxxxxxx]
Sent: Wednesday, November 19, 2008 11:22 AM
To: venefax@xxxxxxxxx
Cc: james.harper@xxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded

 

Sorry, sent the wrong link...here's the correct one:
http://wiki.xensource.com/xenwiki/XenWindowsGplPv

-Nick


-----Original Message-----
From: Venefax <venefax@xxxxxxxxx>
To: 'James Harper' <james.harper@xxxxxxxxxxxxxxxx>, xen-users@xxxxxxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] GPLPV 0.9.12-pre4 uploaded
Date: Wed, 19 Nov 2008 09:33:48 -0500

 
I am using Suse 10 SP2 and installed the drivers pre4, but the new network
card says "cable not connected". What do I have to do to make the drivers
work in Suse 10 Sp2? Any configuration at the global XEN level?
Federico
 
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of James Harper
Sent: Wednesday, November 19, 2008 7:27 AM
To: xen-users@xxxxxxxxxxxxxxxxxxx; xen-devel@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] GPLPV 0.9.12-pre4 uploaded
 
I've just uploaded 0.9.12-pre4 to http://www.meadowcourt.org/downloads
 
Fixes/updates since 0.9.12-pre3:
. rolled back IRQ restriction which would prevent the drivers from
starting if the pci device wanted to use an IRQ < 16
. fixed another bug in crash dump that could possibly cause corruption
under high Dom0 disk load
. performance improvements to xennet - udp performance is much much
better, I can easily achieve 500MBits/second from Dom0<->DomU or
DomU<->External machine over 1GBit/second wire. Tcp performance should
be as good as before but with lower cpu.
 
To see some of the the network performance improvements, you'll need to
disable 'Check checksum on RX packets'. It only exists as WHQL fails
without it, even though it isn't a real-world scenario. The 'interrupt
moderation' option appears to cause things to go slower at the moment...
it may reduce load but I think it needs some more tuning!
 
If anyone can offer any suggestions as to why my Windows 2003 R2 server
takes so long to get to the login prompt after boot with GPLPV but is
quicker without it I'd like to hear them - it seems to get it's dhcp
lease quickly enough so something else about the network adapter or
about the gplpv drivers must be causing the delay...
 
James
 
 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
 
 
 

This e-mail may contain confidential and privileged material for the sole use of the intended recipient. If this email is not intended for you, or you are not responsible for the delivery of this message to the intended recipient, please note that this message may contain SEAKR Engineering (SEAKR) Privileged/Proprietary Information. In such a case, you are strictly prohibited from downloading, photocopying, distributing or otherwise using this message, its contents or attachments in any way. If you have received this message in error, please notify us immediately by replying to this e-mail and delete the message from your mailbox. Information contained in this message that does not relate to the business of SEAKR is neither endorsed by nor attributable to SEAKR.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.