[Xen-users] Problem with opensuse PVM

[Junior <junior.c@xxxxxxxxx>]

Hi all.

I have a problem with pciback in OpenSUSE using PVM.
I try to send 3 nic for the PVM.. its ok.. but.. if i try ifconfig eth3 up.. got the error...

Please.. see this.

Anybody.. know this problem?

Thanks,
Junior



opensuse:~ # uptime
  3:36pm  up   0:03,  2 users,  load average: 0.02, 0.06, 0.02
opensuse:~ # uname -a
Linux opensuse 2.6.27.7-9-xen #1 SMP 2008-12-04 18:10:04 +0100 x86_64 x86_64 x86_64 GNU/Linux
opensuse:~ #
opensuse:~ # ifconfig
eth0      Link encap:Ethernet  HWaddr 00:16:3E:40:9B:82
          inet addr:192.168.7.102  Bcast:192.168.255.255  Mask:255.255.0.0
          inet6 addr: fe80::216:3eff:fe40:9b82/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2266 errors:0 dropped:0 overruns:0 frame:0
          TX packets:443 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:257947 (251.9 Kb)  TX bytes:68850 (67.2 Kb)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:100 (100.0 b)  TX bytes:100 (100.0 b)

opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ # dmesg |grep -i eth
netfront: Initialising virtual ethernet driver.
Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.8.0 (Aug 14, 2008)
eth2: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 00:1e:c9:b9:78:a6
0000:0a:00.0: eth3: (PCI Express:2.5GB/s:Width x4) 00:15:17:94:b2:5a
0000:0a:00.0: eth3: Intel(R) PRO/1000 Network Connection                       
0000:0a:00.0: eth3: MAC: 0, PHY: 4, PBA No: c57721-005
0000:0a:00.1: eth4: (PCI Express:2.5GB/s:Width x4) 00:15:17:94:b2:5b
0000:0a:00.1: eth4: Intel(R) PRO/1000 Network Connection
0000:0a:00.1: eth4: MAC: 0, PHY: 4, PBA No: c57721-005
0000:0a:00.0: eth3: Unable to allocate interrupt, Error: -38                    <------- PROBLEM
eth0: no IPv6 routers present
opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ # ifconfig -a
eth0      Link encap:Ethernet  HWaddr 00:16:3E:40:9B:82
          inet addr:192.168.7.102  Bcast:192.168.255.255  Mask:255.255.0.0
          inet6 addr: fe80::216:3eff:fe40:9b82/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2577 errors:0 dropped:0 overruns:0 frame:0
          TX packets:503 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:317384 (309.9 Kb)  TX bytes:77450 (75.6 Kb)

eth1      Link encap:Ethernet  HWaddr 00:16:3E:03:EE:4F
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

eth2      Link encap:Ethernet  HWaddr 00:1E:C9:B9:78:A6
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:16 Memory:f8000000-f8012700

eth3      Link encap:Ethernet  HWaddr 00:15:17:94:B2:5A
          inet addr:10.10.10.1  Bcast:10.10.10.255  Mask:255.255.255.0
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Memory:fc3e0000-fc400000

eth4      Link encap:Ethernet  HWaddr 00:15:17:94:B2:5B
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Memory:fc3a0000-fc3c0000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:2 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:100 (100.0 b)  TX bytes:100 (100.0 b)

opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ #
opensuse:~ # ifconfig eth3 up
SIOCSIFFLAGS: Function not implemented
opensuse:~ # ifconfig eth2 up
SIOCSIFFLAGS: Function not implemented
opensuse:~ # ifconfig eth4 up
SIOCSIFFLAGS: Function not implemented
opensuse:~ # dmesg |tail -n 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
pci frontend enable msi failed for dev 3:0
pci frontend enable msi failed for dev 3:0
0000:0a:00.0: eth3: Unable to allocate interrupt, Error: -38
pci frontend enable msi failed for dev 3:0
0000:0a:00.1: eth4: Unable to allocate interrupt, Error: -38
pci frontend enable msi failed for dev 3:0
pci frontend enable msi failed for dev 3:0
pci frontend enable msi failed for dev 3:0
opensuse:~ #


My Dom0 running Debian 
kali:/etc/xen# uname -a
Linux kali 2.6.18.8-xen #2 SMP Mon Mar 9 10:08:53 EDT 2009 x86_64 GNU/Linux
kali:/etc/xen#
kali:/etc/xen# xm pci-list opensuse
domain   bus   slot   func
0x0  0x03   0x00    0x0
0x0  0x0a   0x00    0x0
0x0  0x0a   0x00    0x1
kali:/etc/xen#

My config

kali:/etc/xen# cat vega.conf
name="opensuse"
memory=2048
uuid="be6d563a-0b6f-4504-bf1b-92049c10761e"
cpu='2'
disk = ['phy:/dev/mapper/kali-opensuse1,hda,w' ]
vif=[ 'bridge=xenbr0', 'bridge=dummy1' ]
pci = [ '03:00.0', '0a:00.0', '0a:00.1' ]
vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=jilo' ]
bootloader = "/usr/bin/pygrub"
#kernel = "/boot/x86_64/vmlinuz-xen"
#ramdisk = "/boot/x86_64/initrd-xen"
vcpus=1
>>#apci=0
acpi=0
kali:/etc/xen#

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users