Re: [Xen-users] network-route problem, maybe over GPLPV driver

[Johnny Bravo <JohnnyBravo@xxxxxxx>]

as i thought, new windows hvm domu with gplpv drivers works, but where  
i could find such drivers for linux?


> Hello to all! please help at least on third time
>
> My situation:
> I have Suse 11.1 64bit dom0 and 4 hvm domu: 2 - windows 2008 with  
> full gplpv drivers installed (0.9.12-pre13) and 2 - debian lenny 32  
> bit (if u know how to make normal shutdown for lenny domu via xm  
> shutdown please let me know :) )
> network config - network-bridge, vif-bridge
> Everything was great with bridging config but I decide to move to  
> network-route/vif-route config and here comes my problem: all lenny  
> domu become unrechable, all pings telnets sshs finishs by  
> Destination unreachable
> ifconfig in dom0 shows me it:
>
> debvl Link encap:EthernetHWaddr FE:FF:FF:FF:FF:FF
> inet addr:80.45.22.55Bcast:80.255.255.255Mask:255.255.255.255
> UP BROADCAST RUNNING MULTICASTMTU:1500Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:795 overruns:0 carrier:0
> collisions:0 txqueuelen:32
> RX bytes:0 (0.0 b)TX bytes:0 (0.0 b)
>
> so all packets drops, if I ping from domu (lenny) I have the same  
> Destination unreachable but RX/TX counters in dom0 stay zero
> with other domu - windows 2008 with GPLPV drivers everything is ok,  
> I can access from/to them
> I try to reinstall lenny-domu, add new ones, add windows one without  
> gplpv driver - same situation - Destination unreachable, now I will  
> try to install gplpv driver to new windows domu - i think it will  
> help, but what i should to do with lenny-domu?
> hvm config for all domu is the same, exept vif parametrs and disk  
> modes:
> import os, re
> arch = os.uname()[4]
> if re.search('64', arch):
> arch_libdir = 'lib64'
> else:
> arch_libdir = 'lib'
> kernel = '/usr/lib/xen/boot/hvmloader'
> builder='hvm'
> device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
> name = 'blabla'
> memory = 2048
> maxmem = 2048
> vcpus=2
> acpi=1
> usb=1
> #usbdevice='host:0529:0001' - :)    if u know how to transfer  
> alladin dongle to hvm domu please let me know, cose this one doesnot  
> work        :)
> usbdevice='tablet'
> apic=1
> shadow_memory=16
> vif=['ip=192.168.200.3,mac=00:16:3e:74:47:b6,vifname=Dtbin']
> disk = ['phy:/dev/virtpart2/hdd1,hda,w']
> boot='c'
> sdl=0
> vnc=1
> vncviewer=1
> vncdisplay=2
> localtime='yes'
> stdvga=0
> serial='pty'
> #ne2000=0
> on_poweroff='destroy'
> on_reboot='restart'
> on_crash='restart'
> on_xend_start='start'
> on_xend_stop='shutdown'
>
>
> PS Sorry for my english :)
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users