[Xen-users] Bluescreen after installing gplpv 0.10.0.69

[Max-Julian Pogner <mjp@xxxxxxxxxxxx>]

Hi all,


I'm setting up Windows 2008 64bit on xen+hvm

after windows setup has finished, I installed the drivers with
gplpv_fre_wlh_AMD64_0.10.0.69.msi and
a) either get an digital signature error, OR when disabling signature
checking via Pressing F8 during boot, get
b) a Bluescreen with a STOP: 0x00007B error.

I have tried
- DSEO from http://www.ngohq.com/home.php?page=dseo
  (gives same bluescreen),
- importing james harper's signature as CA/etc, no change.
  (windows still does not recognize xenpci.sys as digitally signed)


As far as I grasp the idea, the blue screen should be unrelated to the
digital-signature issue, since that is temporarily "resolved" by the F8
option to disable signature verification.

0x7B means that windows has some device issues, so the xen drivers do
not load despite disabling the digital signature?


additionally I have seen, that after installing the drivers, but before
reboot, the device manager lists the xenpci.sys driver for the Xen PV
PCI device as "not signed" (but the .sys file has Harper's siganture
according to it's file-properties).



Any ideas?


regards,


  Max Pogner


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users