[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Bridges are not working
Hi, I have been using xen with debian etch during two years. I had some problems during the initial steps, but after that the system was working without any problem. Last week I upgrade the debian Lenny and my domU stopped to work (network) and I'm really lost. My configuration is simple. I have a box with two nics. In one nic I have dom0 (attached to a network) and in the other nix I have domU (attached to another network). domU boot, up the interfaces but no network. No packed throw the bridge. my brctl show is: bridge name bridge id STP enabled interfaces eth0 8000.001422757b2c no peth0 eth1 8000.000423a8b773 no peth1 vif6.0 the important part of my sxp file is: (network-script 'network-bridge netdev=eth1 bridge=eth1') in domU the interface is eth1 on of the things that I don't like is that doing a tcpdump in the interface peth1, I got that there's traffic, but: 14:50:04.222421 STP 802.1d, Config, Flags [none], bridge-id 806f.00:13:1a:a9:b3:00.8007, length 43 message-age 1.00s, max-age 20.00s, hello-time 2.00s, forwarding-delay 15.00s pay attention with the bridge-id 806f.00:13:1a:a9:b3:00.8007, not showed in brctl. So, please any idea what I'm doing wrong, or what's happening? I'm running: ii xen-hypervisor-3.2-1-i386 3.2.1-2 ii xen-linux-system-2.6.26-2-xen-686 2.6.26-15lenny2 ii xen-utils-3.2-1 3.2.1-2 ii xen-utils-common 3.2.0-2 ii xenman 0.5-2.1 ii xenstore-utils 3.2.1-2 ii xenwatch 0.5.2-1 best regards, Leo _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |