[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Bridges are not working


  • To: Xen User-List <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Fajar A. Nugraha" <fajar@xxxxxxxxx>
  • Date: Sun, 24 May 2009 08:24:28 +0700
  • Delivery-date: Sat, 23 May 2009 18:25:16 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

On Sun, May 24, 2009 at 2:15 AM, Leopold Palomo Avellaneda
<leo@xxxxxxxxxxxx> wrote:
>> - does eth1 (the bridge) work when you put ip address there
>
> well, in dom0 it works, with bridge and without bridge

at least that worked. Now :
- check iptables rules. Is it blocking packets?
- try putting IP address on dom0's eth1 (the bridge) and domUs eth0,
see if you can ping dom0 from domU. While trying that, on another
terminal do tcpdump on dom0 to snoop packets on the vif (vif6.0 on
your example) and on eth1. This should determine whether the problem
is on the bridge setup, NIC, or switch.

As a side note, you should be able to use your old, working dom0
kernel (from Etch?) on newer Xen versions, so you might want to try
that as well.

-- 
Fajar

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.