[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] RE: Xen 3.4.0, windows 2003 R2 installation crashes


  • To: "David Griswold" <dgriswold@xxxxxxxxxxxxxxxxx>, <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Ian Tobin" <itobin@xxxxxxxxxxxxx>
  • Date: Fri, 12 Jun 2009 15:32:04 +0100
  • Cc:
  • Delivery-date: Fri, 12 Jun 2009 07:34:23 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AcnrRCqzT+WhLDJuQQKzzGNmMR+4pgAGPf0gAADSAPAAAiuVgAAAURTA
  • Thread-topic: [Xen-users] RE: Xen 3.4.0, windows 2003 R2 installation crashes

Ive installed R2 using the defaults which is 

Acpi=1
Apic=1

Not had any problems installing

Ian


-----Original Message-----
From: David Griswold [mailto:dgriswold@xxxxxxxxxxxxxxxxx] 
Sent: 12 June 2009 15:27
To: Ian Tobin; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] RE: Xen 3.4.0, windows 2003 R2 installation
crashes

I have not, but I am not sure that I have an install disk for pre-R2
Win2k3 server.  I'll try it if I can find one and report my findings.

I have to admit, I haven't installed any Win2K3 R2 servers on Xen since
3.0.3, which is what came with CentOS 5.2.  I just upgraded Xen and
continued to run the same domU images, without issue.  I wonder if it
has to do with the 'acpi'/'apic' settings in the domU config?  It's been
a couple of months, but I remember something about having to set these
to '0' during install and then back to '1' after the install was done.

David

-----Original Message-----
From: Ian Tobin [mailto:itobin@xxxxxxxxxxxxx]
Sent: Friday, June 12, 2009 8:20 AM
To: David Griswold; xen-users@xxxxxxxxxxxxxxxxxxx
Subject: RE: [Xen-users] RE: Xen 3.4.0, windows 2003 R2 installation
crashes

Have you tried installing Windows Standard then upgrading to R2?



-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of David
Griswold
Sent: 12 June 2009 14:00
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] RE: Xen 3.4.0, windows 2003 R2 installation crashes

I thought I was going crazy the first time this happened.  I was
reinstalling a production domU on a production server and I turned
around and saw the server rebooting.  So I tried it again, after hours,
and I saw exactly what you did.  I have pretty much the same exact
setup, but 32 bit.

CentOS 5.3 32bit with Xen 3.4.0 from Gitco on a IBM x3650 w/4 GB RAM

David Griswold
IT Manager
OneWorld Community Health Centers

------------------------------

Date: Fri, 12 Jun 2009 10:00:44 +0300
From: Pekka.Panula@xxxxxxxx
Subject: [Xen-users] Xen 3.4.0, windows 2003 R2 installation crashes
        whole system
To: xen-users@xxxxxxxxxxxxxxxxxxx
Message-ID:

<OFB14BDD72.01E2FA26-ONC22575D3.00262C97-C22575D3.00267F84@xxxxxxxx>
Content-Type: text/plain; charset="us-ascii"

Hi

CentOS 5.3 64-bit server with RPMS from Gitco's untested repository
(=Xen 3.4.0).
 I am testing to install Windows 2003 server R2, but when copying files
goes to 99% it reboots whole server.
Is there anyone else who is also using same Xen version and tested
windows installation?

Terveisin/Regards,
   Pekka Panula, Net Servant Oy

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users





_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.