Re: [Xen-users] Problem DomU Windows NT

[Alexandre CABROL PERALES <alexandre.cabrol@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

i tried to set 0 to pae apic and acpi but no result.

I removed maxmem and use instead memory=512.
But same error.

I used CPUID from physical computer which run Windows NT:

>  eax in    eax      ebx      ecx      edx
> 00000000 00000002 756e6547 6c65746e 49656e69
> 00000001 00000f12 00010808 00000000 3febfbff
> 00000002 665b5001 00000000 00000000 007a7040
> 80000000 80000004 00000000 00000000 00000000
> 80000001 00000000 00000000 00000000 00000000
> 80000002 20202020 20202020 20202020 6e492020
> 80000003 286c6574 50202952 69746e65 52286d75
> 80000004 20342029 20555043 30352e31 007a4847
> 
> Vendor ID: "GenuineIntel"; CPUID level 2
> 
> Intel-specific functions:
> Version 00000f12:
> Type 0 - Original OEM
> Family 15 - Pentium 4
> Extended family 0
> Model 1 - 
> Stepping 2
> Reserved 0
> 
> Brand index: 8 [Intel Pentium 4 processor]
> Extended brand string: "              Intel(R) Pentium(R) 4 CPU 1.50GHz"
> CLFLUSH instruction cache line size: 8
> Hyper threading siblings: 1
> 
> Feature flags 3febfbff:
> FPU    Floating Point Unit
> VME    Virtual 8086 Mode Enhancements
> DE     Debugging Extensions
> PSE    Page Size Extensions
> TSC    Time Stamp Counter
> MSR    Model Specific Registers
> PAE    Physical Address Extension
> MCE    Machine Check Exception
> CX8    COMPXCHG8B Instruction
> APIC   On-chip Advanced Programmable Interrupt Controller present and enabled
> SEP    Fast System Call
> MTRR   Memory Type Range Registers
> PGE    PTE Global Flag
> MCA    Machine Check Architecture
> CMOV   Conditional Move and Compare Instructions
> FGPAT  Page Attribute Table
> PSE-36 36-bit Page Size Extension
> CLFSH  CFLUSH instruction
> DS     Debug store
> ACPI   Thermal Monitor and Clock Ctrl
> MMX    MMX instruction set
> FXSR   Fast FP/MMX Streaming SIMD Extensions save/restore
> SSE    Streaming SIMD Extensions instruction set
> SSE2   SSE2 extensions
> SS     Self Snoop
> HT     Hyper Threading
> TM     Thermal monitor
> 
> TLB and cache info:
> 50: Instruction TLB: 4KB and 2MB or 4MB pages, 64 entries
> 5b: Data TLB: 4KB and 4MB pages, 64 entries
> 66: 1st-level data cache: 8KB, 4-way set assoc, 64 byte line size
> 40: No 2nd-level cache, or if 2nd-level cache exists, no 3rd-level cache
> 70: Trace cache: 12K-micro-op, 4-way set assoc
> 7a: 2nd-level cache: 256KB, 8-way set assoc, sectored, 64 byte line size

so i defined in config vm file:


 # Intel(R) Pentium(R) 4 CPU

 cpuid = [ '0x00000000,eax=00000002,ebx=756e6547,ecx=6c65746e,edx=49656e69',
           '0x00000001,eax=00000f12,ebx=00010808,ecx=00000000,edx=3febfbff',
           '0x00000002,eax=665b5001,ebx=00000000,ecx=00000000,edx=007a7040',
           '0x80000000,eax=80000004,ebx=00000000,ecx=00000000,edx=00000000',
           '0x80000001,eax=00000000,ebx=00000000,ecx=00000000,edx=00000000',
           '0x80000002,eax=20202020,ebx=20202020,ecx=20202020,edx=6e492020',
           '0x80000003,eax=286c6574,ebx=50202952,ecx=69746e65,edx=52286d75',
           '0x80000004,eax=20342029,ebx=20555043,ecx=30352e31,edx=007a4847']

But still same error.


James Harper a écrit :
>> -----BEGIN PGP SIGNED MESSAGE-----
>> Hash: SHA1
>>
>> Hello,
>> i'm currently working on Debian Lenny x86_64 (kernel
> 2.6.26-2-xen-amd64).
>> I have my VT flag on and already installed linux distribution in HVM
>> mode. I did test to install debian not modified in HVM mode and it
> works
>> well.
>>
>> Currently i'm trying to run Windows NT as DomU on my server.
>> I've got bluescreen (see joined png file).
>>
>> message start with:
>> p5-0000 irql:1e SYSVER 0xf0000565
>>
>> Do you have any idea?
>>
> 
> According to the docs, bug check 0x3E is:
> 
> "
> Bug Check 0x3E: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
> The MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED bug check has a value of
> 0x0000003E. This indicates that the system has multiple processors, but
> they are asymmetric in relation to one another.
> 
> Parameters
> None
> 
> Cause
> In order to be symmetric, all processors must be of the same type and
> level. This system contains processors of different types (for example,
> a Pentium processor and an 80486 processor).
> "
> 
> So... for whatever reason, NT thinks you have multiple CPU's and that
> they are different. Clearly, based on your config, it is wrong about
> that.
> 
> Try adding apic=0 and acpi=0 to your config.
> 
> I see you have already tried tinkering with the CPUID value. You might
> need to do this a bit more but I can't think what else you'd need to
> change.
> 
> Also, you have maxmem specified in your config. When I do this in 3.4.1,
> Windows thinks that I actually have maxmem amount of memory and dom0/xen
> crashes as soon as Windows tries to access the 'phantom' memory between
> 'memmory' and 'maxmem'. It seemed to work fine in 3.3.x though.
> 
> James
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> .
> 

- --
Alexandre CABROL PERALES
- --
Ingenieur Securite des Systemes d'Information
Mob. :    06.98.82.03.06
Mail :    alexandre.cabrol@xxxxxxxx
Key fingerprint = 1E6B B8DF 5001 A6A8 E057  9D31 7B3B EAB1 4AE4 8953
- --
ARTAL Technologies

Rue Pierre-Gilles de Gennes
Ens."La Rue", Bat. 9, BP 38138
31681 Labege cedex

Tel. :    05.61.00.39.30
Fax :     05.61.00.20.43


-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org

iEYEARECAAYFAkpUtIsACgkQezvqsUrkiVN6BACghIyyLGeCeLFKosmJ4V1qpg7I
xSkAoIwiF9M+3qVlqgZleN3HVKNaH0IY
=d9mi
-----END PGP SIGNATURE-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users