[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-users] can't add vlans successfully


  • To: xen-users@xxxxxxxxxxxxxxxxxxx
  • From: Zhang Li <cindy.zhangli@xxxxxxxxx>
  • Date: Tue, 11 Aug 2009 11:56:47 +0800
  • Delivery-date: Mon, 10 Aug 2009 20:57:36 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:date:message-id:subject:from:to:content-type :content-transfer-encoding; b=fn5DOatlG5RaXHPtaUJTU/tZQhSFXgwHWIaDgstbepgwD05A/ohcnLiwFsYP2wia7D 7/6EqOaueJg9aosF9ALemXdJrzqXrD30bJF4bDURrz1xuEZQ676oKGaX/r2SLU5gu8bE +OzMIkQwwyMhjkDjP/3HOQsUumFS7DcRqOU6U=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

Hi,

I want to add 2 vlans by the following steps:
1. add the vlan interfaces:
   vconfig add eth0 100      --vlan100
   vconfig add eth0 101      --vlan101

2. modify the network-bridge script by the websit,
http://wiki.xensource.com/xenwiki/XenNetworking#head-04ebcc1760dbc4678e83b116afa310dc0612dc39
   Comment each time ifup or ifdown commands are executed.The reason
is that ifdown ends with error for vlan interfaces.

    /etc/xen/script/network-bridge  start netdev=eth0
   /etc/xen/script/network-bridge  start netdev=eth0.100
   /etc/xen/script/network-bridge start netdev=eth0.101


Then we use brctl show, we can see eth0.100 and eth0.101 bridges is
start up.  Then we start 4 xenU, 2 xenUs on each bridges.

But questions is that: I can't get the 8021q packages with ethereal
tool.  I doubt that I don't setup the vlans successfully. And xenU in
the vlans can't connect the outside by using ping address.

Is anybody know about this?

Best Regards

--Li


-- 
Best regards
--Li

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.