Re: [Xen-users] [XCP] questions

[Pasi Kärkkäinen <pasik@xxxxxx>]

On Thu, Jan 21, 2010 at 09:46:27AM -0500, James Pifer wrote:
> On Thu, 2010-01-21 at 09:56 +0200, Pasi Kärkkäinen wrote:
> > lspci -vvv
> 
> ???Pasi,
> 
> Here's the output in relation to the iLo.
> 

Hmm.. The 01:04.0 device seems to have an I/O port, and the last one is called 
UART.
So I'm wondering which one of those it is..

What does "dmesg | grep -i ttys" say in dom0? Does it detect a serial port? 

What's the model of your server?

"Integrated Lights-Out Virtual Serial Port configuration and operation HOWTO, 
4th edition":
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00263709/c00263709.pdf

"HP Integrated Lights-Out 2 User Guide":
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00553302/c00553302.pdf

-- Pasi

> Thanks,
> James
> 
> 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out 
> Controller (rev 03)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin A routed to IRQ 21
>       Region 0: I/O ports at 2800 [size=256]
>       Region 1: Memory at f5fe0000 (32-bit, non-prefetchable) [size=512]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: hpwdt
>       Kernel modules: hpwdt
> 
> 01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  
> Processor (rev 03)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64, Cache Line Size: 64 bytes
>       Interrupt: pin B routed to IRQ 22
>       BIST result: 00
>       Region 0: I/O ports at 3400 [size=256]
>       Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K]
>       Region 2: Memory at f5fc0000 (32-bit, non-prefetchable) [size=16K]
>       Region 3: Memory at f5f00000 (32-bit, non-prefetchable) [size=512K]
>       [virtual] Expansion ROM at f5e20000 [disabled] [size=64K]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: hpilo
>       Kernel modules: hpilo
> 
> 01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB 
> controller (prog-if 00 [UHCI])
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
> Stepping- SERR+ FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Latency: 64
>       Interrupt: pin B routed to IRQ 22
>       Region 4: I/O ports at 3800 [size=32]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: uhci_hcd
>       Kernel modules: uhci-hcd
> 
> 01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual 
> UART (prog-if 01)
>       Subsystem: Hewlett-Packard Company Device 3305
>       Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
> Stepping- SERR- FastB2B- DisINTx-
>       Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
> <TAbort- <MAbort- >SERR- <PERR- INTx-
>       Interrupt: pin A routed to IRQ 21
>       Region 0: Memory at f5ef0000 (32-bit, non-prefetchable) [size=256]
>       Capabilities: [f0] Power Management version 3
>               Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
> PME(D0+,D1-,D2-,D3hot+,D3cold+)
>               Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>       Kernel driver in use: ipmi_si
>       Kernel modules: ipmi_si
> 
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users