Re: [Xen-users] [XCP] questions

[James Pifer <jep@xxxxxxxxxxxxxxxx>]

On Thu, 2010-01-21 at 09:56 +0200, Pasi KÃrkkÃinen wrote:
> lspci -vvv

ïPasi,

Here's the output in relation to the iLo.

Thanks,
James

01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out 
Controller (rev 03)
        Subsystem: Hewlett-Packard Company Device 3305
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at 2800 [size=256]
        Region 1: Memory at f5fe0000 (32-bit, non-prefetchable) [size=512]
        Capabilities: [f0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: hpwdt
        Kernel modules: hpwdt

01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  
Processor (rev 03)
        Subsystem: Hewlett-Packard Company Device 3305
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64, Cache Line Size: 64 bytes
        Interrupt: pin B routed to IRQ 22
        BIST result: 00
        Region 0: I/O ports at 3400 [size=256]
        Region 1: Memory at f5fd0000 (32-bit, non-prefetchable) [size=2K]
        Region 2: Memory at f5fc0000 (32-bit, non-prefetchable) [size=16K]
        Region 3: Memory at f5f00000 (32-bit, non-prefetchable) [size=512K]
        [virtual] Expansion ROM at f5e20000 [disabled] [size=64K]
        Capabilities: [f0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: hpilo
        Kernel modules: hpilo

01:04.4 USB Controller: Hewlett-Packard Company Proliant iLO2 virtual USB 
controller (prog-if 00 [UHCI])
        Subsystem: Hewlett-Packard Company Device 3305
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 64
        Interrupt: pin B routed to IRQ 22
        Region 4: I/O ports at 3800 [size=32]
        Capabilities: [f0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

01:04.6 IPMI SMIC interface: Hewlett-Packard Company Proliant iLO2 virtual UART 
(prog-if 01)
        Subsystem: Hewlett-Packard Company Device 3305
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 21
        Region 0: Memory at f5ef0000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [f0] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ipmi_si
        Kernel modules: ipmi_si



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users