[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] private interconnect problem



On Wed, Feb 10, 2010 at 9:19 PM, Javed Asif <jia786@xxxxxxxxxxx> wrote:
> Thanks Fajar for your replies.
> You have correctly understood the problem. Actually this is my home network
> (and I'm newbie admin) so I have to do everything.

Ouch

> Are you suggesting to replace the switch with router and configure it for
> private vlan?

I suggest you learn about networking first. Seriously.

Here's a hint though. If your ONLY problem right now is to make the
privs be able to communicate with dom0, Then the easiest way is to
probably add another interface (connected to the switch, which is
connected to eth1) to your current router, and configure it with IP
address 10.99.1.1, and tell the privs to use that IP address as
gateway.

If you find managing multiple network/vlans too hard, then simply put
the privs in the same network as dom0, and give them IP address in the
same range.

-- 
Fajar

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.