Re: [Xen-users] Bridge Setup problem in domU!

[Jan Muhammad <janmuhd@xxxxxxxxx>]

Hi Mark,

Thanks indeed for your response.
Do you mean I should disable earlier entries in (/etc/network/interfaces) config file; I already have static entries in this file. I note that when I did so the NFS seems to stoped/failed and also now I can't create new domU's due to unavailablity of Network Proxy... :(

Regards

-Jan

From: Mark Hurenkamp <mark.hurenkamp@xxxxxxxxx>
Subject: Re: [Xen-users] Bridge Setup problem in domU!
To: "Jan Muhammad" <janmuhd@xxxxxxxxx>
Cc: xen-users@xxxxxxxxxxxxxxxxxxx
Date: Monday, 15 February, 2010, 21:50

Hi Jan,


> Either I disable or enable DHCP option in config file still the error
> message is same (as follow).
> Although both dom0 and domU boot okay, except for a problem with bridge
> problem. The network bridge is never setup when the
> server is rebooted.  I have to shutdown domU, and then run
>
> ./network-bridge stop
> ./network-bridge start

I'm using a similar setup, running a Ubuntu Karmic dom0, and several
Debian/Ubuntu domU machines.

But I've completely stopped using the network-bridge scripts, and now
setup the bridge from my /etc/network/interfaces config file, which avoids
the whole problem of transfering IP, and renaming eth device completely.


Here's an example for setting up a bridge using Debian/Ubuntu:

auto br0
iface br0 inet static
        address 192.168.1.101
        network 192.168.1.0
        netmask 255.255.255.0
        broadcast 192.168.1.255
        gateway 192.168.1.1
        bridge_ports eth0

This has worked fine for me ever since the first xen-3.0 days ;-)


Regards,

Mark.

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users