|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Re: Xen-users Digest, Vol 61, Issue 14
Unsubscribe. On 3/2/10, xen-users-request@xxxxxxxxxxxxxxxxxxx <xen-users-request@xxxxxxxxxxxxxxxxxxx> wrote: > Send Xen-users mailing list submissions to > xen-users@xxxxxxxxxxxxxxxxxxx > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.xensource.com/mailman/listinfo/xen-users > or, via email, send a message with subject or body 'help' to > xen-users-request@xxxxxxxxxxxxxxxxxxx > > You can reach the person managing the list at > xen-users-owner@xxxxxxxxxxxxxxxxxxx > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of Xen-users digest..." > > > Today's Topics: > > 1. Re: xen Installation through YUM (Pasi K?rkk?inen) > 2. Re: XCP Hanging at Setting Hostname (Pasi K?rkk?inen) > 3. Re: xen/next & pvm pci passthrough? (Pasi K?rkk?inen) > 4. Re: XCP Hanging at Setting Hostname (Pasi K?rkk?inen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 2 Mar 2010 08:59:34 +0200 > From: Pasi K?rkk?inen <pasik@xxxxxx> > Subject: Re: [Xen-users] xen Installation through YUM > To: kishore kumar <bodkekumar@xxxxxxxxx> > Cc: Boris Derzhavets <bderzhavets@xxxxxxxxx>, > xen-users@xxxxxxxxxxxxxxxxxxx > Message-ID: <20100302065934.GX2761@xxxxxxxxxxx> > Content-Type: text/plain; charset=iso-8859-1 > > On Mon, Mar 01, 2010 at 04:52:57PM -0800, kishore kumar wrote: >> Hi All, >> >> To follow up this, after Installing Xen Hypervisor 3.4.2 successfully, >> I >> downloaded Linux 2.6.18 with Xen 3.4.x support source tarball, updated >> for >> Xen 3.4.2 from [1]xen.org website and compiled and installed. >> >> Later I changed my grub.conf file to boot from Xen. >> >> ####################### >> root (hd0,0) >> kernel /xen-3.4.2.gz >> module /vmlinuz-2.6.18 ro root=dev/mapper/VolGroup-lv_root >> LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us >> rhgb quiet >> module /initrd-2.6.18.8.img >> ####################### >> >> After I reboot, I get the following messages. >> >> ################ >> >> Xenopf Intel processor model 44 or P6 family is not supported. >> Initialization failed. >> >> LOADING DOMAIN 0 >> Cannot load bzImage v2.04. v2.08 is required. >> >> Panic on CPU 0 >> Could not set up DOM 0 Guest OS >> Reboot in 5 sec >> >> ############### >> What is wrong happening here? >> > > I guess with linux-2.6.18-xen you should be using just the zImage, > not bzImage? > > -- Pasi > >> THanks >> BK >> On Mon, Mar 1, 2010 at 12:14 PM, kishore kumar >> <[2]bodkekumar@xxxxxxxxx> >> wrote: >> >> Hi Boris, >> >> I was following your steps and got stuck in the middle. Here is what >> I >> did... >> >> Step 1 was sucessfull and Xen Hypervisor 3.4.2 is installed >> successfully. >> >> Now while doing the step 2 >> >> STEP 2: >> >> Install Libvirt >> # yum install libvirt libvirt-python python-virtinst \ >> virt-manager virt-viewer (THIS WENT THROUGH SUCCESSFULLY) >> >> PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge >> Git Repository to support Xen 3.4.2 Dom0. >> # git clone >> git://[3]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> linux-2.6-xen (THIS WENT THROUGH SUCCESSFULLY) >> # cd linux-2.6-xen >> # make menuconfig ( setup Xen Dom0 support) (HOW TO SET UP THIS ?) >> # make -j(x)(number_of_kernels) (I DID MAKE -J, WHAT SHOULD I GIVE >> HERE >> IN PLACE OF x. ?? >> >> BUT GAVE ME ERRORS. I DONT KNOW WHAT WRONG I AM DOING HERE. CAN >> YOU >> PLEASE HELP ME OUT IN THIS?) >> >> I HAVE ATTACHED THE LOG FILE FOR YOUR REFERENCE. I AM USING FEDORA >> 12 >> MACHINE. >> >> Thanks >> BK >> >> On Sat, Feb 27, 2010 at 4:27 AM, Boris Derzhavets >> <[4]bderzhavets@xxxxxxxxx> wrote: >> >> Nothing went wrong. >> Now build pvops kernel. >> Instructions bellow. >> Reading PVOPS WIKI would help as well >> >> Boris. >> >> --- On Fri, 2/26/10, kishore kumar <[5]bodkekumar@xxxxxxxxx> wrote: >> >> From: kishore kumar <[6]bodkekumar@xxxxxxxxx> >> Subject: Re: [Xen-users] xen Installation through YUM >> To: "Pasi Kärkkäinen" <[7]pasik@xxxxxx> >> Cc: "Boris Derzhavets" <[8]bderzhavets@xxxxxxxxx>, >> [9]xen-users@xxxxxxxxxxxxxxxxxxx >> Date: Friday, February 26, 2010, 9:41 PM >> >> Now I am able to do yum install kernel-xen xen. >> >> I can see the xen Images sitting in /boot directory. Its xen-3.4.2.gz >> and xen.gz. >> >> Is this what to be expected ? >> >> I changed the grub.conf file to boot with Xen as below >> >> title Fedora (2.6.31.9-174.fc12.x86_64) >> root(hd0,0) >> kernel /xen-3.4.2.gz >> >> My question is I dont see vmlinuz-2.6-xen0 in /boot directory. >> >> Do I need to add this line module /boot/vmlinuz-2.6-xen0 ??? But I dont >> see this >> file .When we do yum to insall xen, will it also install >> vmlinuz-2.6-xen0 also ?? >> >> Any idea what went wrong here?? >> >> thanks >> BK >> >> >> On Fri, Feb 26, 2010 at 2:28 PM, Pasi Kärkkäinen <[10]pasik@xxxxxx> >> wrote: >> >> On Fri, Feb 26, 2010 at 02:23:37PM -0800, kishore kumar wrote: >> > I have already set gpgcheck=0 in /etc/yum.conf file. >> > >> > I did not clearly understood on what you said in the next >> line......... >> > >> > to install unsigned rpms supposed to be built latter. >> > Activate rpmbuild on F12:- >> > >> > # yum install transfig texi2html libaio-devel dev86 \ >> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd >> > what should I do can you please clarify me on the above >> statements you >> > said??? >> > >> > I followed your next step and downloaded xen-3.4.2-2.fc13.src.rpm >> from >> > internet and started doing the steps mentioned by you. but at >> the very >> > step I get the messages saying >> > >> > After I ran the rpm -iv xen-3.4.2-2.fc13.src.rpm >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > warning: user mockbuild does not exist - using root >> > warning: group mockbuild does not exist - using root >> > >> > Any idea what went wrong again?? >> > >> >> Nothing went wrong, those are just warnings. >> >> -- Pasi >> > THanks >> > bk >> > >> > On Fri, Feb 26, 2010 at 5:39 AM, Boris Derzhavets >> > <[1][11]bderzhavets@xxxxxxxxx> wrote: >> > >> > Set in /etc/yum.conf set gpgcheck=0 ( temporarily ) >> > to install unsigned rpms supposed to be built latter. >> > Activate rpmbuild on F12:- >> > >> > # yum install transfig texi2html libaio-devel dev86 \ >> > glibc-devel.i686 e2fsprogs-devel gitk mkinitrd >> > >> > 1. Install Xen 3.4.2 via xen-3.4.2-2.fc13.src.rpm. Download from Net >> > xen-3.4.2-2.fc13.src.rpm. Now :- >> > >> > # rpm -iv xen-3.4.2-2.fc13.src.rpm >> > # cd >> > # cd rpmbuild/SPEC >> > # rpmbuild -bb ./xen.spec >> > # cd ../RPMS/x86_64 >> > yum install xen-3.4.2-2.fc12.x86_64.rpm \ >> > xen-debuginfo-3.4.2-2.fc12.x86_64.rpm \ >> > xen-devel-3.4.2-2.fc12.x86_64.rpm \ >> > xen-doc-3.4.2-2.fc12.x86_64.rpm \ >> > xen-hypervisor-3.4.2-2.fc12.x86_64.rpm \ >> > xen-libs-3.4.-2.fc12.x86_64.rpm \ >> > xen-runtime-3.4.2-2.fc12.x86_64.rpm >> > >> > Xen Hypervisor 3.4.2 installed >> > >> > 2. Install Libvirt >> > >> > # yum install libvirt libvirt-python python-virtinst \ >> > virt-manager virt-viewer >> > >> > PVOPS kernel 2.6.31.6 may be installed via Jeremy Fitzhardinge >> > Git Repository to support Xen 3.4.2 Dom0. >> > >> > # git clone >> git://[2][12]git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > linux-2.6-xen >> > # cd linux-2.6-xen >> > # make menuconfig ( setup Xen Dom0 support) >> > # make -j(x)(number_of_kernels) >> > # make modules_install install >> > >> > You may also want to build 2.6.32.9 pvops >> > >> > # git checkout origin/xen/stable -b xen/stable >> > >> > I just switched from xen/master ( default 2.6.31.6 ) to xen/stable >> (the most >> > recent supposed to become LTS - 2.6.32.9) >> > >> > Boris. >> > >> > --- On Fri, 2/26/10, Pasi Kärkkäinen <[3][13]pasik@xxxxxx> wrote: >> > >> > From: Pasi Kärkkäinen <[4][14]pasik@xxxxxx> >> > Subject: Re: [Xen-users] xen Installation through YUM >> > To: "kishore kumar" <[5][15]bodkekumar@xxxxxxxxx> >> > Cc: [6][16]xen-users@xxxxxxxxxxxxxxxxxxx >> > Date: Friday, February 26, 2010, 4:50 AM >> > >> > On Thu, Feb 25, 2010 at 06:04:26PM -0800, kishore kumar wrote: >> > > HI, >> > > >> > > I am trying to install xen through yum. Here is what I did. >> > > >> > > >> > > [root@localhost Kishore]# yum install kernel-xen xen >> > > >> > > Setting up Install Process >> > > >> > > Resolving Dependencies >> > > >> > > --> Running transaction check >> > > >> > > ---> Package kernel.x86_64 0:2.6.31.9-174.fc12 set to be >> installed >> > > >> > > --> Processing Dependency: kernel-firmware >= >> 2.6.31.9-174.fc12 for >> > > package: kernel-2.6.31.9-174.fc12.x86_64 >> > > >> > > ---> Package xen.x86_64 0:3.4.2-1.fc12 set to be updated >> > > >> > > --> Processing Dependency: xen-runtime = 3.4.2-1.fc12 for >> package: >> > > xen-3.4.2-1.fc12.x86_64 >> > > >> > > --> Processing Dependency: PyXML for package: >> xen-3.4.2-1.fc12.x86_64 >> > > >> > > --> Running transaction check >> > > >> > > ---> Package PyXML.x86_64 0:0.8.4-17.fc12 set to be updated >> > > >> > > ---> Package kernel-firmware.noarch 0:2.6.31.9-174.fc12 set >> to be >> updated >> > > >> > > ---> Package xen-runtime.x86_64 0:3.4.2-1.fc12 set to be >> updated >> > > >> > > --> Processing Dependency: xen-libs = 3.4.2-1.fc12 for >> package: >> > > xen-runtime-3.4.2-1.fc12.x86_64 >> > > >> > > --> Processing Dependency: xen-hypervisor-abi = 3.4 for >> package: >> > > xen-runtime-3.4.2-1.fc12.x86_64 >> > > >> > > --> Running transaction check >> > > >> > > ---> Package xen-hypervisor.x86_64 0:3.4.2-1.fc12 set to be >> updated >> > > >> > > ---> Package xen-libs.x86_64 0:3.4.2-1.fc12 set to be updated >> > > >> > > --> Finished Dependency Resolution >> > > >> > > Dependencies Resolved >> > > >> > > >> > >> >> ================================================================================ >> > > >> > > Package Arch Version Repository Size >> > > >> > > >> > >> >> ================================================================================ >> > > >> > > Installing: >> > > >> > > kernel x86_64 2.6.31.9-174.fc12 updates-released 20 M >> > > >> > > xen x86_64 3.4.2-1.fc12 updates-released 898 k >> > > >> > > Installing for dependencies: >> > > >> > > PyXML x86_64 0.8.4-17.fc12 updates-released 906 k >> > > >> > > xen-hypervisor x86_64 3.4.2-1.fc12 updates-released 2.9 M >> > > >> > > xen-runtime x86_64 3.4.2-1.fc12 updates-released 4.0 M >> > > >> > > Updating for dependencies: >> > > >> > > kernel-firmware noarch 2.6.31.9-174.fc12 updates-released 906 >> k >> > > >> > > xen-libs x86_64 3.4.2-1.fc12 updates-released 165 k >> > > >> > > Transaction Summary >> > > >> > > >> > >> >> ================================================================================ >> > > >> > > Install 5 Package(s) >> > > >> > > Upgrade 2 Package(s) >> > > >> > > Total download size: 29 M >> > > >> > > Is this ok [y/N]: y >> > > >> > > Downloading Packages: >> > > >> > > (1/7): PyXML-0.8.4-17.fc12.x86_64.rpm | 906 kB 00:00 >> > > >> > > (2/7): kernel-2.6.31.9-174.fc12.x86_64.rpm | 20 MB 00:02 >> > > >> > > (3/7): kernel-firmware-2.6.31.9-174.fc12.noarch.rpm | 906 kB >> 00:00 >> > > >> > > (4/7): xen-3.4.2-1.fc12.x86_64.rpm | 898 kB 00:00 >> > > >> > > (5/7): xen-hypervisor-3.4.2-1.fc12.x86_64.rpm | 2.9 MB 00:00 >> > > >> > > (6/7): xen-libs-3.4.2-1.fc12.x86_64.rpm | 165 kB 00:00 >> > > >> > > (7/7): xen-runtime-3.4.2-1.fc12.x86_64.rpm | 4.0 MB 00:00 >> > > >> > > >> > >> >> -------------------------------------------------------------------------------- >> > > >> > > Total 6.7 MB/s | 29 MB 00:04 >> > > >> > > warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 signature: >> NOKEY, key >> ID >> > > 57bbccba >> > > >> > > Public key for xen-libs-3.4.2-1.fc12.x86_64.rpm is not >> installed >> > > >> > > >> > > >> > > Did Xen got installed with this? >> > > >> > > Will the grub.conf be automatically updtaed after I run this >> command. >> > > (But I dont see my grub.conf being updated) >> > > >> > > Any Idea what went wrong here. >> > > >> > >> > Fedora 12 doesn't include Xen dom0 capable kernel, see: >> > [7][17]http://fedoraproject.org/wiki/Features/XenPvopsDom0 >> > >> > You need to get one of the 'testing' rpms, or compile it yourself. >> > >> > -- Pasi >> > >> > _______________________________________________ >> > Xen-users mailing list >> > [8][18]Xen-users@xxxxxxxxxxxxxxxxxxx >> > [9][19]http://lists.xensource.com/xen-users >> > >> > References >> > >> > Visible links >> > 1. mailto:[20]bderzhavets@xxxxxxxxx >> > 2. >> [21]http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> > 3. mailto:[22]pasik@xxxxxx >> > 4. mailto:[23]pasik@xxxxxx >> > 5. mailto:[24]bodkekumar@xxxxxxxxx >> > 6. mailto:[25]xen-users@xxxxxxxxxxxxxxxxxxx >> > 7. [26]http://fedoraproject.org/wiki/Features/XenPvopsDom0 >> > 8. [27]http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx >> > 9. [28]http://lists.xensource.com/xen-users >> >> -----Inline Attachment Follows----- >> >> _______________________________________________ >> Xen-users mailing list >> [29]Xen-users@xxxxxxxxxxxxxxxxxxx >> [30]http://lists.xensource.com/xen-users >> >> References >> >> Visible links >> 1. http://xen.org/ >> 2. mailto:bodkekumar@xxxxxxxxx >> 3. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 4. mailto:bderzhavets@xxxxxxxxx >> 5. mailto:bodkekumar@xxxxxxxxx >> 6. mailto:bodkekumar@xxxxxxxxx >> 7. mailto:pasik@xxxxxx >> 8. mailto:bderzhavets@xxxxxxxxx >> 9. mailto:xen-users@xxxxxxxxxxxxxxxxxxx >> 10. http://mc/compose?to=pasik@xxxxxx >> 11. http://mc/compose?to=bderzhavets@xxxxxxxxx >> 12. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 13. http://mc/compose?to=pasik@xxxxxx >> 14. http://mc/compose?to=pasik@xxxxxx >> 15. http://mc/compose?to=bodkekumar@xxxxxxxxx >> 16. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx >> 17. http://fedoraproject.org/wiki/Features/XenPvopsDom0 >> 18. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx >> 19. http://lists.xensource.com/xen-users >> 20. http://mc/compose?to=bderzhavets@xxxxxxxxx >> 21. http://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git >> 22. http://mc/compose?to=pasik@xxxxxx >> 23. http://mc/compose?to=pasik@xxxxxx >> 24. http://mc/compose?to=bodkekumar@xxxxxxxxx >> 25. http://mc/compose?to=xen-users@xxxxxxxxxxxxxxxxxxx >> 26. http://fedoraproject.org/wiki/Features/XenPvopsDom0 >> 27. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx >> 28. http://lists.xensource.com/xen-users >> 29. http://mc/compose?to=Xen-users@xxxxxxxxxxxxxxxxxxx >> 30. http://lists.xensource.com/xen-users > > > > ------------------------------ > > Message: 2 > Date: Tue, 2 Mar 2010 09:13:03 +0200 > From: Pasi K?rkk?inen <pasik@xxxxxx> > Subject: Re: [Xen-users] XCP Hanging at Setting Hostname > To: James Troup <james@xxxxxxxxxxxxxxxxx> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Message-ID: <20100302071303.GY2761@xxxxxxxxxxx> > Content-Type: text/plain; charset=us-ascii > > On Tue, Mar 02, 2010 at 03:44:10PM +1030, James Troup wrote: >> Hi, >> >> I posted this a week ago but got no response, so I am posting again in >> hope that I do. >> >> XCP is hanging at (or just after) "Setting Hostname" >> > > Just the init scripts.. what does it do after that? > Just a wild guess: is your DNS configuration correct? > > -- Pasi > >> If you keep trying eventually it gets past this point. >> It might take 5-20 attempts to get XCP to boot. >> When it does boot all is stable. >> >> I have the same problem on 4 different boxes. >> >> 2 x INTEL Black Box Dual XEON server. >> 1 x AMD II x250 >> 1 x Core2Duo NoteBook used for DEV. >> >> All 3 boxes are using mdadm raid 1. >> >> The problem was present with XCP 0.1 and is still present with XCP 0.1.1 >> >> Thanks for your help. >> >> James >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users > > > > ------------------------------ > > Message: 3 > Date: Tue, 2 Mar 2010 09:17:30 +0200 > From: Pasi K?rkk?inen <pasik@xxxxxx> > Subject: Re: [Xen-users] xen/next & pvm pci passthrough? > To: Mark Hurenkamp <mark.hurenkamp@xxxxxxxxx> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Message-ID: <20100302071730.GZ2761@xxxxxxxxxxx> > Content-Type: text/plain; charset=us-ascii > > On Mon, Mar 01, 2010 at 11:34:43PM +0100, Mark Hurenkamp wrote: >> Hi, >> >> >> Does anyone know if pvm pci passthrough is supposed to work on xen/next >> branch? I'm trying to get a device passed to the pvm, but things don't >> work >> the same as on xen/master (where i used pciback). >> > > iirc xen/next is still missing some pci passthrough stuff. > Btw the module is called xen-pciback nowadays. > > -- Pasi > >> Here's what i do on xen/master dom0: >> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/cx23885/unbind >> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pciback/new_slot >> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pciback/bind >> >> Then when i boot the pvm using also xen/master kernel, it shows up on >> lspci, >> and i can load the driver. >> >> But when i run xen/next dom0, pciback doesn't seem to exist, so i use >> pci-stub >> to grab the device: >> >> lspci -n >> 05:00.0 0400: 14f1:8852 (rev 02) >> >> echo -n "14f1 8852" > /sys/bus/pci/drivers/pci-stub/new_id >> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/cx23885/unbind >> echo -n "0000:05:00.0" > /sys/bus/pci/drivers/pci-stub/bind >> >> Now i boot the same pvm using xen/next kernel, however nothing shows up on >> >> lspci after the pvm is up. >> >> Is this not working yet? Or am i just doing something wrong? >> >> My config file is the same for both, and contains the following: >> >> bootloader = "/usr/bin/pygrub" >> maxmem = 1024 >> memory = 1024 >> name = "pvm" >> vif = [ 'mac=aa:20:00:00:02:17, bridge=br0' ] >> disk = [ >> 'phy:mirror/pvm_root,hda1,w', >> 'phy:mirror/pvm_swap,hda2,w', >> ] >> pci = [ >> '0000:05:00.0' >> ] >> vcpus=2 >> >> >> >> Regards, >> Mark. >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users > > > > ------------------------------ > > Message: 4 > Date: Tue, 2 Mar 2010 09:17:58 +0200 > From: Pasi K?rkk?inen <pasik@xxxxxx> > Subject: Re: [Xen-users] XCP Hanging at Setting Hostname > To: James Troup <james@xxxxxxxxxxxxxxxxx> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Message-ID: <20100302071758.GA2761@xxxxxxxxxxx> > Content-Type: text/plain; charset=iso-8859-1 > > On Tue, Mar 02, 2010 at 09:13:03AM +0200, Pasi Kärkkäinen wrote: >> On Tue, Mar 02, 2010 at 03:44:10PM +1030, James Troup wrote: >> > Hi, >> > >> > I posted this a week ago but got no response, so I am posting again in >> > hope that I do. >> > >> > XCP is hanging at (or just after) "Setting Hostname" >> > >> >> Just the init scripts.. what does it do after that? > > Eh.. I was supposed to write "check the init scripts" :) > Too early morning.. > > -- Pasi > >> Just a wild guess: is your DNS configuration correct? >> >> -- Pasi >> >> > If you keep trying eventually it gets past this point. >> > It might take 5-20 attempts to get XCP to boot. >> > When it does boot all is stable. >> > >> > I have the same problem on 4 different boxes. >> > >> > 2 x INTEL Black Box Dual XEON server. >> > 1 x AMD II x250 >> > 1 x Core2Duo NoteBook used for DEV. >> > >> > All 3 boxes are using mdadm raid 1. >> > >> > The problem was present with XCP 0.1 and is still present with XCP 0.1.1 >> > >> > >> > Thanks for your help. >> > >> > James >> > >> > _______________________________________________ >> > Xen-users mailing list >> > Xen-users@xxxxxxxxxxxxxxxxxxx >> > http://lists.xensource.com/xen-users >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users > > > > ------------------------------ > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > > > End of Xen-users Digest, Vol 61, Issue 14 > ***************************************** > -- Best Regards, John Musbach _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |