[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: Re: [Xen-users] Xen 4.0.0 - tapdisk2 "hangs"



Thanks for the info!

I've already tried a PV_OPS kernel in the meantime, and that seems to work (blktap2), but bombs somewhere else and I haven't had the time to analyze that crash.

Generally, why I'm interested in blktap2 is that I can't get a host that has an XFS root filesystem to boot with blktap1; the PV kernel loads, but freezes when trying to access the root filesystem (this doesn't happen for another host which uses an ext3 root). The aftermath of the XFS freeze is the same: the dom0 is fscked and needs to be rebooted. If all fails, I'll just stick with blkback for the moment. ;-)

Anyway, thanks for the info, and if you get around to packaging the new kernel, just give me a heads up and I'll happily try it!



-- Heiko vom Palm Pre


Andrew Lyon <andrew.lyon@xxxxxxxxx> schrieb am 05.05.2010 20:03:

On Tue, May 4, 2010 at 2:09 PM, Heiko Wundram <modelnine@xxxxxxxxxxxxx> wrote:
> Hey all!
>
> I'm currently in the process of migrating a (Gentoo-based) Xen-server to use
> Xen 4.0.0 (where I'm using the Xen ebuilds from bugs.gentoo.org), and I'm
> having severe problems with tapdisk2 (which I wish to use to do I/O
> prioritizing using CFQ on the LVM-based backing storage of a virtual
> server).
>
> It seems that after a while of heavy I/O in the virtual domain, the
> communication between the (paravirtualized) DomU and Dom0 (the
> tapdisk2-process) breaks, in that no more interrupts are delivered to Dom0
> for I/O requests from the virtual domain, and as such the virtual host
> "loses" its harddisk (but does not "break" besides not responding). The
> network front-/backend is not affected by this communication loss, AFAICT.
>
> The virtual host can be destroyed by an xm destroy, but the created blktap2
> interface does not disappear until the next reboot, and cannot be removed by
> the respective sysfs accesses (rather, echoing a 1 into "remove" blocks,
> too, and is "unkillable", i.e. stays in kernel space). After a blktap2
> device has entered this broken state, no more hosts can be created by xm
> create (that blocks, too), and the host system must be rebooted to enter a
> usable state again.
>
> I've not been able to provoke this breakage by "normal" I/O (i.e., when the
> hosts run normally), but I have been able to provoke it by using bonnie,
> which after a short period of substained read/write I/O of +120MB/s will
> freeze the blktap2 device.
>
> The Dom0 and the DomU kernels that are being used are xen-sources-2.6.32-r1
> (which are the xen-stable 2.6.32.10 [11?] based OpenSuSE Xen-kernel sources,
> AFAIK) from the official portage tree; the kernel configuration that's in
> use is attached.
>
> I've tried iommu=off for xen (the mobo doesn't support VT-d anyway, so Xen
> never turns it on), and I've also looked for any signs of errors appearing
> when setting verbosity 9 for the blktap2 module and loglvl=all and
> guest_loglvl=all for Xen, but there are no errors that I've seen so far.
>
> Strace-ing the tapdisk2 process reveals that it's blocked on select(), and
> none of the descriptors it's polling on ever return as readable (which is
> the condition that tapdisk2 queries), rather they always timeout after 600s.
>
> Thanks in advance for any hint as to what is causing this, or if there's
> anything I might try to get things working...
>
> PS: I have to boot with acpi=off, as the mobo won't reboot when acpi is
> turned on for Dom0 (not even when disabling ACPI reboots), but using acpi
> directly doesn't change that blktap2 blocks.
>
> --- Heiko.
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>

I have had exactly the same problem and ended up going back to tapdisk1.

I was able to replicate the problem using the entire SLE11-SP1 kernel
source patch set which proves that the bug exists upstream,
unfortunately I am very busy on other projects at the moment so did
not have time to debug it at all.

The SLE11-SP1 tree has been updated since xen-sources-2.6.32-r1, I
will make a updated set of patches for you to try but it will take me
a couple of days.

Andy

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.