[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Re: [Xen-users] RE: Xen4 / Intel DX58SO Mobo / VT-d not working


  • To: Sander Eikelenboom <linux@xxxxxxxxxxxxxx>
  • From: chris <tknchris@xxxxxxxxx>
  • Date: Fri, 14 May 2010 17:26:22 -0400
  • Cc: Xen-Devel List <xen-devel@xxxxxxxxxxxxxxxxxxx>, Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Fri, 14 May 2010 14:31:16 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=c2dmlGXW0LwwIAKqqjkdk3VQ9GOceSiSRFYwoZ+ra9RX4p1VBNyD15FeVE6M1CEeji OOmVEGrOPw3beHnt94tAw0d1bKvWdlcnu1PCkoBGjqS5apmcBZIjS84WTCBdzcV/eOR4 S+B1Fl+WfcNZhwfgL3g+eWQbsjetQbwup7TDM=
  • List-id: Xen developer discussion <xen-devel.lists.xensource.com>

My guests are HVM so thats not really possible. Yes the machine with
3.4.2 has a hardware IOMMU.

- chris

On Fri, May 14, 2010 at 5:25 PM, Sander Eikelenboom
<linux@xxxxxxxxxxxxxx> wrote:
> Hello chris,
>
> But does the other machine have an IOMMU on 3.4.2 ?
> I passthrough a few USB controllers my self, but the machine doesn't have a 
> hardware IOMMU,
> so it uses the SWIOTLB changed by Konrad to work with Xen and let the DMA of 
> the USB controllers work.
> It's working on xen-4.0.1-testing, xen-next pvops kernel from a few weeks 
> ago, various domU kernel.
> One domU kernel is a 2.6.33 from Konrad's tree, with patched and backported 
> xhci support from 2.6.34.
>
> So perhaps you could try with the IOMMU off, see if it makes a difference, 
> and would point the problem to the IOMMU more specifically.
> Oh yes, what pci backend mode have you choosen in your dom0 kernel config ?
> You have 3 options, virtual, passthrough or slot.
> I allways tend to use passthrough, don't know it it makes a big difference 
> though, but at least all functions get registered under the same device id in 
> the guest.
>
>
>
> --
>
> Sander
>
>
>
> Friday, May 14, 2010, 9:46:01 PM, you wrote:
>
>> I added a pci sound card and interestingly that works. I'm digging
>> around for another pci-e device to try to identify if its all pci-e or
>> only this device. Strange this is that I have a few other machines
>> with this same usb controller which is working on 3.4.2.
>
>> *scratches head*
>
>> - chris
>
>> On Fri, May 14, 2010 at 3:21 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>>> On Fri, May 14, 2010 at 03:18:02PM -0400, chris wrote:
>>>> It is a multifunction device, a pci-e usb controller, so I assumed all
>>>> them had to be passed through. I just changed it to only 02:00.0 and
>>>> same thing
>>>>
>>>> test-box2:~# cat /etc/xen/vm-five.cfg | grep pci
>>>> pci = ['02:00.0']
>>>> test-box2:~# xm create /etc/xen/vm-five.cfg
>>>> Using config file "/etc/xen/vm-five.cfg".
>>>> Error: Failed to assign device to IOMMU
>>>> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>>>
>>>
>>> Hmm.. weird.
>>>
>>> Two things to try:
>>>
>>> 1) Try passthru some other device (which is just a single pci id)
>>> 2) Try passthru that pci-e usb controller to Linux PV guest and see if that 
>>> works
>>>
>>> -- Pasi
>>>
>>>>
>>>> On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>>>> > On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote:
>>>> >> Pasi,
>>>> >>
>>>> >> Tried latest stable/2.6.32.x per your advice, no change. Anyone on
>>>> >> xen-devel that can help me troubleshoot further? Everything looks
>>>> >> right, can't figure out why vt-d is not working but it must be some
>>>> >> kind of bug :(
>>>> >>
>>>> >
>>>> > Did you try the suggestion said earlier.. try to just passthru the first 
>>>> > pci device?
>>>> >
>>>> > -- Pasi
>>>> >
>>>> >> test-box2:~# uname -a
>>>> >> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010 x86_64 
>>>> >> GNU/Linux
>>>> >>
>>>> >> test-box2:~# xm info | grep virt_caps
>>>> >> virt_caps              : hvm hvm_directio
>>>> >>
>>>> >> test-box2:~# xm pci-list-assignable-devices
>>>> >> 0000:02:00.0
>>>> >> 0000:02:00.1
>>>> >> 0000:02:00.2
>>>> >>
>>>> >> test-box2:~# xm create /etc/xen/vm-five.cfg
>>>> >> Using config file "/etc/xen/vm-five.cfg".
>>>> >> Error: Failed to assign device to IOMMU
>>>> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>>> >>
>>>> >> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#'
>>>> >> kernel = '/usr/lib/xen/boot/hvmloader'
>>>> >> builder = 'hvm'
>>>> >> memory = '1792'
>>>> >> device_model='/usr/lib/xen/bin/qemu-dm'
>>>> >> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w',
>>>> >> 'phy:/dev/sr0,ioemu:hdc:cdrom,r'
>>>> >> ]
>>>> >> name = 'vm-five'
>>>> >> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42']
>>>> >> boot='dc'
>>>> >> cpus='0-1'
>>>> >> vcpus=2
>>>> >> acpi=1
>>>> >> ahci=1
>>>> >> vnc=1
>>>> >> sdl=0
>>>> >> timer_mode=1
>>>> >> usb=1
>>>> >> usbdevice='tablet'
>>>> >> localtime=1
>>>> >> pci = ['02:00.0','02:00.1','02:00.2']
>>>> >>
>>>> >> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote:
>>>> >> > Forwarding to xen-devel. Can't seem to get VT-d working with xen4 from
>>>> >> > tarball on xen.org 2.6.31.13 pv_ops dom0. On pasi's advice I tried
>>>> >> > switching to stable/2.6.32.x branch for dom0 and that doesnt even
>>>> >> > build. Did something change recently thats breaking compilation?
>>>> >> >
>>>> >> > Attached is xen dmesg with iommu=verbose loglvl=all guest_loglvl=all,
>>>> >> > and dom0 dmesg from 2.6.31.x
>>>> >> >
>>>> >> > Any ideas on why VT-d is not working on this board? Initialization
>>>> >> > looks good, xen reports hvm_directio capability, everything says VT-d
>>>> >> > should work until domain is created.
>>>> >> >
>>>> >> > Any ideas why stable/2.6.32.x wont build?
>>>> >> >
>>>> >> > - chris
>>>> >> >
>>>> >> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote:
>>>> >> >> I redid it with oldconfig which I didn't think would help and same
>>>> >> >> thing. I guess this tree is broken? Can someone else try and see if
>>>> >> >> they can build it? Ugh, whata day :)
>>>> >> >>
>>>> >> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx> 
>>>> >> >> wrote:
>>>> >> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote:
>>>> >> >>>> I used the default config on the wiki which you created. Steps I 
>>>> >> >>>> took were:
>>>> >> >>>>
>>>> >> >>>> # make clean distclean
>>>> >> >>>> # wget -O .config
>>>> >> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64";
>>>> >> >>>
>>>> >> >>> You should do "make oldconfig" at this point.
>>>> >> >>>
>>>> >> >>>> # make -j8 bzImage
>>>> >> >>>> (blah blah)
>>>> >> >>>>   LD      vmlinux.o
>>>> >> >>>>   MODPOST vmlinux.o
>>>> >> >>>> WARNING: modpost: Found 7 section mismatch(es).
>>>> >> >>>> To see full details build your kernel with:
>>>> >> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
>>>> >> >>>>   GEN     .version
>>>> >> >>>>   CHK     include/linux/compile.h
>>>> >> >>>>   UPD     include/linux/compile.h
>>>> >> >>>>   CC      init/version.o
>>>> >> >>>>   LD      init/built-in.o
>>>> >> >>>>   LD      .tmp_vmlinux1
>>>> >> >>>> drivers/built-in.o: In function `do_hvm_suspend':
>>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined 
>>>> >> >>>> reference
>>>> >> >>>> to `xenbus_suspend'
>>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined 
>>>> >> >>>> reference
>>>> >> >>>> to `xenbus_resume'
>>>> >> >>>> make: *** [.tmp_vmlinux1] Error 1
>>>> >> >>>>
>>>> >> >>>
>>>> >> >>> Hmm.. weird. I wonder if something has changed recently or what's 
>>>> >> >>> going on in here..
>>>> >> >>>
>>>> >> >>> -- Pasi
>>>> >> >>>
>>>> >> >>>>
>>>> >> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen <pasik@xxxxxx> 
>>>> >> >>>> wrote:
>>>> >> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote:
>>>> >> >>>> >> Successfully grabbed the sources and failed to build:
>>>> >> >>>> >>
>>>> >> >>>> >>   LD      .tmp_vmlinux1
>>>> >> >>>> >> drivers/built-in.o: In function `do_hvm_suspend':
>>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined 
>>>> >> >>>> >> reference
>>>> >> >>>> >> to `xenbus_suspend'
>>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined 
>>>> >> >>>> >> reference
>>>> >> >>>> >> to `xenbus_resume'
>>>> >> >>>> >> make: *** [.tmp_vmlinux1] Error 1
>>>> >> >>>> >>
>>>> >> >>>> >> :(
>>>> >> >>>> >>
>>>> >> >>>> >
>>>> >> >>>> > Try the example .config files provided on the wiki page.
>>>> >> >>>> >
>>>> >> >>>> > -- Pasi
>>>> >> >>>> >
>>>> >> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen 
>>>> >> >>>> >> <pasik@xxxxxx> wrote:
>>>> >> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote:
>>>> >> >>>> >> >> Pasi,
>>>> >> >>>> >> >>
>>>> >> >>>> >> >> How do I pull those kernel sources you referenced? I see it 
>>>> >> >>>> >> >> mentioned
>>>> >> >>>> >> >> on http://wiki.xensource.com/xenwiki/XenParavirtOps but no 
>>>> >> >>>> >> >> details on
>>>> >> >>>> >> >> how to retrieve it.
>>>> >> >>>> >> >>
>>>> >> >>>> >> >
>>>> >> >>>> >> > The instructions are there if you read it carefully..
>>>> >> >>>> >> > There's the topic of how to switch branches.
>>>> >> >>>> >> >
>>>> >> >>>> >> > -- Pasi
>>>> >> >>>> >> >
>>>> >> >>>> >> >> - chris
>>>> >> >>>> >> >>
>>>> >> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen 
>>>> >> >>>> >> >> <pasik@xxxxxx> wrote:
>>>> >> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote:
>>>> >> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set 
>>>> >> >>>> >> >> >> iommu=verbose.
>>>> >> >>>> >> >> >> Here is that output, I don't know if it helps at all to 
>>>> >> >>>> >> >> >> figure out
>>>> >> >>>> >> >> >> what is wrong.
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> > That seems to be OK:
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> > (XEN) I/O virtualisation enabled
>>>> >> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff?
>>>> >> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch instead 
>>>> >> >>>> >> >> > and see if that makes a difference..
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> > -- Pasi
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> ---------- Forwarded message ----------
>>>> >> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx>
>>>> >> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM
>>>> >> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not working
>>>> >> >>>> >> >> >> To: Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx>
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> Hello,
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> I've previously been successful with Xen4 and VT-d on 
>>>> >> >>>> >> >> >> other systems. I
>>>> >> >>>> >> >> >> am having trouble getting VT-d passthrough working to a 
>>>> >> >>>> >> >> >> WinXP domain
>>>> >> >>>> >> >> >> with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is 
>>>> >> >>>> >> >> >> enabled in bios,
>>>> >> >>>> >> >> >> xm info shows hvm_directio capability, I have iommu=1 
>>>> >> >>>> >> >> >> set, I have the
>>>> >> >>>> >> >> >> devices bound to pciback on dom0 cmdline, xm
>>>> >> >>>> >> >> >> pci-list-assignable-devices shows the devices as 
>>>> >> >>>> >> >> >> assignable. When I
>>>> >> >>>> >> >> >> attempt to start the VM I get the error:
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> Below is all the information I can think of that would be 
>>>> >> >>>> >> >> >> useful to
>>>> >> >>>> >> >> >> help debug it:
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> BIOS VT-d Enabled:
>>>> >> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg
>>>> >> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> grub entry:
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> title           Xen 4.0.0 / Debian GNU/Linux, kernel 
>>>> >> >>>> >> >> >> 2.6.31.13
>>>> >> >>>> >> >> >> root            (hd0,0)
>>>> >> >>>> >> >> >> kernel          /boot/xen-4.0.0.gz iommu=1 dom0_mem=256M
>>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>>>> >> >>>> >> >> >> module          /boot/vmlinuz-2.6.31.13 root=/dev/md0 ro 
>>>> >> >>>> >> >> >> console=tty0
>>>> >> >>>> >> >> >> xen-pciback.permissive
>>>> >> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.2)(09:00.0)(09:00.1)(09:00.2)
>>>> >> >>>> >> >> >> module          /boot/initrd.img-2.6.31.13
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> # xm pci-list-assignable-devices
>>>> >> >>>> >> >> >> 0000:09:00.0
>>>> >> >>>> >> >> >> 0000:09:00.1
>>>> >> >>>> >> >> >> 0000:09:00.2
>>>> >> >>>> >> >> >> 0000:07:00.0
>>>> >> >>>> >> >> >> 0000:07:00.1
>>>> >> >>>> >> >> >> 0000:07:00.2
>>>> >> >>>> >> >> >> 0000:04:00.0
>>>> >> >>>> >> >> >> 0000:04:00.1
>>>> >> >>>> >> >> >> 0000:04:00.2
>>>> >> >>>> >> >> >> 0000:02:00.0
>>>> >> >>>> >> >> >> 0000:02:00.1
>>>> >> >>>> >> >> >> 0000:02:00.2
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> # xm info
>>>> >> >>>> >> >> >> host                   : test-box2
>>>> >> >>>> >> >> >> release                : 2.6.31.13
>>>> >> >>>> >> >> >> version                : #2 SMP Wed May 12 14:11:37 EDT 
>>>> >> >>>> >> >> >> 2010
>>>> >> >>>> >> >> >> machine                : x86_64
>>>> >> >>>> >> >> >> nr_cpus                : 8
>>>> >> >>>> >> >> >> nr_nodes               : 1
>>>> >> >>>> >> >> >> cores_per_socket       : 4
>>>> >> >>>> >> >> >> threads_per_core       : 2
>>>> >> >>>> >> >> >> cpu_mhz                : 2800
>>>> >> >>>> >> >> >> hw_caps                :
>>>> >> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000
>>>> >> >>>> >> >> >> virt_caps              : hvm hvm_directio
>>>> >> >>>> >> >> >> total_memory           : 7950
>>>> >> >>>> >> >> >> free_memory            : 7812
>>>> >> >>>> >> >> >> node_to_cpu            : node0:0-7
>>>> >> >>>> >> >> >> node_to_memory         : node0:7812
>>>> >> >>>> >> >> >> node_to_dma32_mem      : node0:3249
>>>> >> >>>> >> >> >> max_node_id            : 0
>>>> >> >>>> >> >> >> xen_major              : 4
>>>> >> >>>> >> >> >> xen_minor              : 0
>>>> >> >>>> >> >> >> xen_extra              : .0
>>>> >> >>>> >> >> >> xen_caps               : xen-3.0-x86_64 xen-3.0-x86_32p 
>>>> >> >>>> >> >> >> hvm-3.0-x86_32
>>>> >> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64
>>>> >> >>>> >> >> >> xen_scheduler          : credit
>>>> >> >>>> >> >> >> xen_pagesize           : 4096
>>>> >> >>>> >> >> >> platform_params        : virt_start=0xffff800000000000
>>>> >> >>>> >> >> >> xen_changeset          : unavailable
>>>> >> >>>> >> >> >> xen_commandline        : iommu=1 dom0_mem=256M 
>>>> >> >>>> >> >> >> dom0_max_vcpus=1
>>>> >> >>>> >> >> >> dom0_vcpus_pin=true
>>>> >> >>>> >> >> >> cc_compiler            : gcc version 4.3.2 (Debian 
>>>> >> >>>> >> >> >> 4.3.2-1.1)
>>>> >> >>>> >> >> >> cc_compile_by          : root
>>>> >> >>>> >> >> >> cc_compile_domain      :
>>>> >> >>>> >> >> >> cc_compile_date        : Thu May  6 13:41:25 EDT 2010
>>>> >> >>>> >> >> >> xend_config_format     : 4
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> # xm create vm-five.cfg
>>>> >> >>>> >> >> >> Using config file "./vm-five.cfg".
>>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> I feel like I'm missing something really obvious but I've 
>>>> >> >>>> >> >> >> been at it
>>>> >> >>>> >> >> >> for a while now and have run out of brain power. Anyone 
>>>> >> >>>> >> >> >> have any idea
>>>> >> >>>> >> >> >> what might be wrong?
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> - chris
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> >>  __  __            _  _    ___   ___
>>>> >> >>>> >> >> >>  \ \/ /___ _ __   | || |  / _ \ / _ \
>>>> >> >>>> >> >> >>   \  // _ \ \047_ \  | || |_| | | | | | |
>>>> >> >>>> >> >> >>   /  \  __/ | | | |__   _| |_| | |_| |
>>>> >> >>>> >> >> >>  /_/\_\___|_| |_|    |_|(_)___(_)___/
>>>> >> >>>> >> >> >>
>>>> >> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version 4.3.2 
>>>> >> >>>> >> >> >> (Debian 4.3.2-1.1) ) Thu May  6 13:41:25 EDT 2010
>>>> >> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable
>>>> >> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M 
>>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>>>> >> >>>> >> >> >> (XEN) Video information:
>>>> >> >>>> >> >> >> (XEN)  VGA is text mode 80x25, font 8x16
>>>> >> >>>> >> >> >> (XEN)  VBE/DDC methods: none; EDID transfer time: 0 
>>>> >> >>>> >> >> >> seconds
>>>> >> >>>> >> >> >> (XEN)  EDID info not retrieved because no DDC retrieval 
>>>> >> >>>> >> >> >> method detected
>>>> >> >>>> >> >> >> (XEN) Disc information:
>>>> >> >>>> >> >> >> (XEN)  Found 2 MBR signatures
>>>> >> >>>> >> >> >> (XEN)  Found 2 EDD information structures
>>>> >> >>>> >> >> >> (XEN) Xen-e820 RAM map:
>>>> >> >>>> >> >> >> (XEN)  0000000000000000 - 000000000008f000 (usable)
>>>> >> >>>> >> >> >> (XEN)  000000000008f000 - 0000000000090000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  0000000000090000 - 000000000009ec00 (usable)
>>>> >> >>>> >> >> >> (XEN)  000000000009ec00 - 00000000000a0000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  00000000000e0000 - 0000000000100000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  0000000000100000 - 00000000cf4bd000 (usable)
>>>> >> >>>> >> >> >> (XEN)  00000000cf4bd000 - 00000000cf4bf000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  00000000cf4bf000 - 00000000cf4c2000 (usable)
>>>> >> >>>> >> >> >> (XEN)  00000000cf4c2000 - 00000000cf7bf000 (ACPI NVS)
>>>> >> >>>> >> >> >> (XEN)  00000000cf7bf000 - 00000000cf7df000 (usable)
>>>> >> >>>> >> >> >> (XEN)  00000000cf7df000 - 00000000cf7ff000 (ACPI data)
>>>> >> >>>> >> >> >> (XEN)  00000000cf7ff000 - 00000000cf800000 (usable)
>>>> >> >>>> >> >> >> (XEN)  00000000cf800000 - 00000000d0000000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  00000000f8000000 - 00000000fd000000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  00000000ffe00000 - 0000000100000000 (reserved)
>>>> >> >>>> >> >> >> (XEN)  0000000100000000 - 0000000230000000 (usable)
>>>> >> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
>>>> >> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6       1000013)
>>>> >> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field 
>>>> >> >>>> >> >> >> "Pm2ControlBlock" has zero address or length: 
>>>> >> >>>> >> >> >> 0000000000000450/0 [20070126]
>>>> >> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040
>>>> >> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL  SSDT  PM     
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL  DX58SO       
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL  PerfTune     
>>>> >> >>>> >> >> >> 11F6 MSFT  100000D)
>>>> >> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB)
>>>> >> >>>> >> >> >> (XEN) Domain heap initialised
>>>> >> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21
>>>> >> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address 
>>>> >> >>>> >> >> >> 0xfec00000, GSI 0-23
>>>> >> >>>> >> >> >> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398:   dmaru->address = fe711000
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1b.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398:   dmaru->address = fe710000
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:340:   IOAPIC: f0:1f.7
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:411:   flags: INCLUDE_ALL
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr e9000 
>>>> >> >>>> >> >> >> end_address e9fff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr ea000 
>>>> >> >>>> >> >> >> end_address eafff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr eb000 
>>>> >> >>>> >> >> >> end_address ebfff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1a.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr e6000 
>>>> >> >>>> >> >> >> end_address e6fff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1a.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr e7000 
>>>> >> >>>> >> >> >> end_address e7fff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1a.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr e8000 
>>>> >> >>>> >> >> >> end_address e8fff
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334:   endpoint: 0:1d.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571:   RMRR region: base_addr ec000 
>>>> >> >>>> >> >> >> end_address eefff
>>>> >> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>> >> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor.
>>>> >> >>>> >> >> >> (XEN) Initing memory sharing.
>>>> >> >>>> >> >> >> (XEN) VMX: Supported advanced features:
>>>> >> >>>> >> >> >> (XEN)  - APIC MMIO access virtualisation
>>>> >> >>>> >> >> >> (XEN)  - APIC TPR shadow
>>>> >> >>>> >> >> >> (XEN)  - Extended Page Tables (EPT)
>>>> >> >>>> >> >> >> (XEN)  - Virtual-Processor Identifiers (VPID)
>>>> >> >>>> >> >> >> (XEN)  - Virtual NMI
>>>> >> >>>> >> >> >> (XEN)  - MSR direct-access bitmap
>>>> >> >>>> >> >> >> (XEN) HVM: ASIDs enabled.
>>>> >> >>>> >> >> >> (XEN) HVM: VMX enabled
>>>> >> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected.
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe711000 
>>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262 ecap = 
>>>> >> >>>> >> >> >> f0207a
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe710000 
>>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap = 
>>>> >> >>>> >> >> >> f020fa
>>>> >> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported.
>>>> >> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported.
>>>> >> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported.
>>>> >> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported.
>>>> >> >>>> >> >> >> (XEN) I/O virtualisation enabled
>>>> >> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled
>>>> >> >>>> >> >> >> (XEN) Total of 8 processors activated.
>>>> >> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs
>>>> >> >>>> >> >> >> (XEN)  -> Using new ACK method
>>>> >> >>>> >> >> >> (XEN) TSC is reliable, synchronization unnecessary
>>>> >> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET
>>>> >> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB.
>>>> >> >>>> >> >> >> (XEN) Brought up 8 CPUs
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:19.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.5
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = a:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.4
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.5
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.6
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.7
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.4
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.0
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.1
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.2
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.3
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: 
>>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
>>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation: 
>>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
>>>> >> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 ***
>>>> >> >>>> >> >> >> (XEN)  Xen  kernel: 64-bit, lsb, compat32
>>>> >> >>>> >> >> >> (XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 
>>>> >> >>>> >> >> >> 0x26ae000
>>>> >> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>> >> >>>> >> >> >> (XEN)  Dom0 alloc.:   0000000210000000->0000000220000000
>>>> >> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>>> >> >>>> >> >> >> (XEN)  Loaded kernel: ffffffff81000000->ffffffff826ae000
>>>> >> >>>> >> >> >> (XEN)  Init. ramdisk: ffffffff826ae000->ffffffff8f4de600
>>>> >> >>>> >> >> >> (XEN)  Phys-Mach map: ffffffff8f4df000->ffffffff8f55f000
>>>> >> >>>> >> >> >> (XEN)  Start info:    ffffffff8f55f000->ffffffff8f55f4b4
>>>> >> >>>> >> >> >> (XEN)  Page tables:   ffffffff8f560000->ffffffff8f5df000
>>>> >> >>>> >> >> >> (XEN)  Boot stack:    ffffffff8f5df000->ffffffff8f5e0000
>>>> >> >>>> >> >> >> (XEN)  TOTAL:         ffffffff80000000->ffffffff8f800000
>>>> >> >>>> >> >> >> (XEN)  ENTRY ADDRESS: ffffffff81a10860
>>>> >> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs
>>>> >> >>>> >> >> >> (XEN) Scrubbing Free RAM: 
>>>> >> >>>> >> >> >> ..............................................................................done.
>>>> >> >>>> >> >> >> (XEN) Xen trace buffers: disabled
>>>> >> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings
>>>> >> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and 
>>>> >> >>>> >> >> >> warnings)
>>>> >> >>>> >> >> >> (XEN) Xen is relinquishing VGA console.
>>>> >> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three 
>>>> >> >>>> >> >> >> times to switch input to Xen)
>>>> >> >>>> >> >> >> (XEN) Freed 164kB init memory.
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
>>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929 pirq=23
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin 
>>>> >> >>>> >> >> >> for in-use IRQ!
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >> >> _______________________________________________
>>>> >> >>>> >> >> >> Xen-users mailing list
>>>> >> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx
>>>> >> >>>> >> >> >> http://lists.xensource.com/xen-users
>>>> >> >>>> >> >> >
>>>> >> >>>> >> >
>>>> >> >>>> >
>>>> >> >>>
>>>> >> >>
>>>> >> >
>>>> >
>>>
>
>
>
>
>
> --
> Best regards,
>  Sander                            mailto:linux@xxxxxxxxxxxxxx
>
>

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.