[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-bugs] strange pvops problem



I compiled the pvops kernel like this :
[root@localhost xen-4.0.0]# ls
buildconfigs                  config     Config.mk.orig  dist  extras  install.sh           Makefile  README   tools               xen
build-linux-2.6-pvops_x86_32  Config.mk  COPYING         docs  file    linux-2.6-pvops.git  messages  stubdom  unmodified_drivers
[root@localhost build-linux-2.6-pvops_x86_32]# make -j2 bzImage modules
make -C /home/onkar/xen/xen-4.0.0/linux-2.6-pvops.git O=/home/onkar/xen/xen-4.0.0/build-linux-2.6-pvops_x86_32/. bzImage modules
scripts/kconfig/conf -s arch/x86/Kconfig
  CHK     include/linux/version.h
  CHK     include/linux/utsrelease.h
  SYMLINK include/asm -> include/asm-x86
  Using /home/onkar/xen/xen-4.0.0/linux-2.6-pvops.git as source for kernel
  MKELF   scripts/mod/elfconfig.h
  HOSTCC  scripts/mod/file2alias.o
  HOSTCC  scripts/mod/modpost.o
  HOSTCC  scripts/mod/sumversion.o
  HOSTLD  scripts/mod/modpost
  CALL    /home/onkar/xen/xen-4.0.0/linux-2.6-pvops.git/scripts/checksyscalls.sh
  CHK     include/linux/compile.h
  LDS     arch/x86/kernel/acpi/realmode/wakeup.lds
  LD      arch/x86/kernel/acpi/realmode/wakeup.elf
  OBJCOPY arch/x86/kernel/acpi/realmode/wakeup.bin
  AS      arch/x86/kernel/acpi/wakeup_rm.o
  LD      arch/x86/kernel/acpi/built-in.o
  LDS     arch/x86/kernel/vmlinux.lds
  LD      arch/x86/kernel/built-in.o
  LDS     arch/x86/vdso/vdso32/vdso32.lds
  VDSO    arch/x86/vdso/vdso32-sysenter.so.dbg
  VDSOSYM arch/x86/vdso/vdso32-sysenter-syms.lds
  VDSO    arch/x86/vdso/vdso32-int80.so.dbg
  OBJCOPY arch/x86/vdso/vdso32-sysenter.so
  VDSOSYM arch/x86/vdso/vdso32-int80-syms.lds
  OBJCOPY arch/x86/vdso/vdso32-int80.so
  VDSOSYM arch/x86/vdso/vdso32-syms.lds
  AS      arch/x86/vdso/vdso32.o
  LD      arch/x86/vdso/built-in.o
  LD      arch/x86/built-in.o
  CC [M]  drivers/usb/serial/keyspan_pda.o
  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: modpost: Found 4 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
  GEN     .version
  CHK     include/linux/compile.h
  UPD     include/linux/compile.h
  CC      init/version.o
  LD      init/built-in.o
  LD      .tmp_vmlinux1
  KSYM    .tmp_kallsyms1.S
  AS      .tmp_kallsyms1.o
  LD      .tmp_vmlinux2
  KSYM    .tmp_kallsyms2.S
  AS      .tmp_kallsyms2.o
  LD      .tmp_vmlinux3
  KSYM    .tmp_kallsyms3.S
  AS      .tmp_kallsyms3.o
  CHK     include/linux/version.h
make[4]: `scripts/unifdef' is up to date.
  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  Building modules, stage 2.
  VOFFSET arch/x86/boot/voffset.h
  LDS     arch/x86/boot/compressed/vmlinux.lds
  OBJCOPY arch/x86/boot/compressed/vmlinux.bin
  RELOCS  arch/x86/boot/compressed/vmlinux.relocs
  GZIP    arch/x86/boot/compressed/vmlinux.bin.gz
  MKPIGGY arch/x86/boot/compressed/piggy.S
  AS      arch/x86/boot/compressed/piggy.o
  LD      arch/x86/boot/compressed/vmlinux
  CC      arch/x86/boot/version.o
  OBJCOPY arch/x86/boot/vmlinux.bin
  ZOFFSET arch/x86/boot/zoffset.h
  AS      arch/x86/boot/header.o
  LD      arch/x86/boot/setup.elf
  OBJCOPY arch/x86/boot/setup.bin
  BUILD   arch/x86/boot/bzImage
Root device is (8, 1)
Setup is 13532 bytes (padded to 13824 bytes).
System is 2856 kB
CRC 9632318a
Kernel: arch/x86/boot/bzImage is ready  (#5)
  MODPOST 1509 modules
  LD [M]  drivers/usb/serial/keyspan_pda.ko
  IHEX2FW firmware/emi26/loader.fw
  IHEX2FW firmware/emi26/firmware.fw
  IHEX2FW firmware/emi26/bitstream.fw
  H16TOFW firmware/edgeport/boot.fw
  H16TOFW firmware/edgeport/boot2.fw
  H16TOFW firmware/edgeport/down.fw
  H16TOFW firmware/edgeport/down2.fw
  IHEX2FW firmware/whiteheat_loader.fw
  IHEX2FW firmware/whiteheat.fw
  IHEX2FW firmware/keyspan_pda/keyspan_pda.fw
  IHEX2FW firmware/keyspan_pda/xircom_pgs.fw


In here we can see that these modules are getting compiled.

but when I do
[root@localhost xen-4.0.0]# make -j2 dist
install: cannot stat `firmware/emi26/loader.fw': No such file or directory
install: cannot stat `firmware/emi26/firmware.fw': No such file or directory
make[6]: *** [/home/onkar/xen/xen-4.0.0/dist/install/lib/firmware/emi26/loader.fw] Error 1
make[6]: *** Waiting for unfinished jobs....
make[6]: *** [/home/onkar/xen/xen-4.0.0/dist/install/lib/firmware/emi26/firmware.fw] Error 1
make[5]: *** [_modinst_post] Error 2
make[4]: *** [sub-make] Error 2
make[3]: *** [all] Error 2
make[2]: *** [build] Error 2
make[1]: *** [linux-2.6-pvops-install] Error 2
make: *** [install-kernels] Error 1


Please help me with this.


Regards,
Onkar

_______________________________________________
Xen-bugs mailing list
Xen-bugs@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-bugs

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.