Xen project Mailing List

Re: [Xen-users] Convert from image to LVM

To: Jonathan Tripathy <jonnyt@xxxxxxxxxxx>

From: Bruce Edge <bruce.edge@xxxxxxxxx>

Date: Sat, 26 Jun 2010 13:02:55 -0700

Delivery-date: Sat, 26 Jun 2010 13:07:47 -0700

Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=n8F0ZuzR80uuF52fT1yM+hBbXLTb3IOpPkgnbosIiKuVq/JBow6HEJBQn2cX47TnYL rFskJXD7mLfbybaqFNqePmQF/3aAbkvS7IZmLnt6oeowChGU9fSc8rUX8iniJVeuJCgp gMLvyCMyguVGp1JPXh0EiT2qZgPRXYv54skDM=

List-id: Xen user discussion <xen-users.lists.xensource.com>

Just run parted on dom0 and you'll see the embedded partitions show up under /dev/mapper.

eg:

0 kaan-22 ~ #> ls -l /dev/mapper

total 0

brw-rw---- 1 root disk 251, 4 Jun 25 09:09 system-dpm_0

0 kaan-22 ~ #> partprobe

0 kaan-22 ~ #> ls -l /dev/mapper

total 0

brw-rw---- 1 root disk 251, 4 Jun 25 09:09 system-dpm_0

brw-rw---- 1 root disk 251, 11 Jun 26 13:01 system-dpm_0p1

brw-rw---- 1 root disk 251, 12 Jun 26 13:01 system-dpm_0p2

brw-rw---- 1 root disk 251, 13 Jun 26 13:01 system-dpm_0p5

You can mount these as regular partitions now.

-Bruce

On Sat, Jun 26, 2010 at 12:09 PM, Jonathan Tripathy <jonnyt@xxxxxxxxxxx> wrote:

How do I use partprobe with LVM?

Thanks
On 26/06/10 20:06, Bruce Edge wrote:
Have you tried using root=UUID=... instead?

Use partprobe to discover the embedded lvm partitions so you can get their UUIDs.
-Bruce
On Sat, Jun 26, 2010 at 11:16 AM, Jonathan Tripathy <jonnyt@xxxxxxxxxxx> wrote:
By changing the config from xvda to sda, it work normal. However I wish to use xvda as I think it's te "standard" for the future..

So clearly there is some setting in my Ubuntu that is still making it look for sda1 instead of hda1. It's as if it's ignoring the "root=" argument in pygrub...

On 26/06/10 19:09, Jonathan Tripathy wrote:
Hi Everyone,

I'm trying to convert my Ubuntu PV Guest from image based disk to LVM. It uses pygrub.

What I did, was I created a new LV and used dd to copy the contents of the image over to the LV. I then changed the domU config file to use phy:/

Now, when I start the DomU, the kernel boots, however it can't seem to mount root properly. It says that /dev/sda1 doesn't exist. What is strange is that in the Dom0, I mounted the LV and changed the root= parameter of the kernel line to point to /dev/hda1, however the previous error still shows

Any ideas?

Thanks
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users