Re: [Xen-users] pciback isn't working ?

[Tegger <xen@xxxxxxxxx>]

DOM0:~# dmesg | grep pciback
[    0.000000] Command line: root=/dev/sda1 ro console=tty0 
xen-pciback.hide=('0000:05:01.0')
[    0.026265] Kernel command line: root=/dev/sda1 ro console=tty0 
xen-pciback.hide=('0000:05:01.0')
[    0.273920] pciback: Error parsing pci_devs_to_hide at "('0000:05:01.0')"


now i got this error....


Am 02.07.2010 19:44, schrieb Dante Cinco:
>   If you're using a newer dom0 kernel (2.6.31 or later), your kernel
> command line needs to use "xen-pciback.hide" instead of "pciback.hide"
>
> See "Binding at Boot-Time with pvops dom0 Linux kernel (2.6.31,
> 2.6.32, and newer)" in http://wiki.xensource.com/xenwiki/VTdHowTo.
>
> Dante
>
> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Tegger
> Sent: Friday, July 02, 2010 10:27 AM
> To: Xen Users
> Subject: [Xen-users] pciback isn't working ?
>
> DOM0:~# dmesg | grep pciback
> [    0.000000] Command line: root=/dev/sda1 ro console=tty0
> pciback.hide=('0000:05:01.0')
> [    0.026253] Kernel command line: root=/dev/sda1 ro console=tty0
> pciback.hide=('0000:05:01.0')
>
> DOM0:~# xm list
> Name                                        ID   Mem VCPUs      State
> Time(s)
> Domain-0                                     0   246     4
> r-----     11.5
>
> DOM0:~# xm create /etc/xen/xen205.cfg
> Using config file "/etc/xen/xen205.cfg".
> Error: pci: PCI Backend and pci-stub don't own device 0000:05:01.0
>
>
> The pciback seems to be working, but i can't start the Domain.....
> i tried a complete new compiling but i didn't get the configurations
> demands again... where can i check the pcibackend options ?
>
>    

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users