[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] DomU PV network problems

On Wed, Sep 8, 2010 at 7:25 PM, Sauro Saltini <saltini@xxxxxx> wrote:
> vif=[ 'type=paravirtual, bridge=br0, mac=00:16:3e:00:00:02',
>      'type=paravirtual, bridge=br1, mac=00:16:3e:00:00:20' ]

you don't need "type=paravirtual", just remove it. Where did you find
"type=paravirtual" anyway? I've never seen it on any of the examples.

> boot='c'

you don't need this as well. It's not used on PV domU.

> sdl=0
> vnc=0

I'm pretty sure you don't need those two lines, since PV domUs use "vfb=..."

> Pinging from testing domU ( doesn't work, and
> tcpdump -nvvi on dom0 (both listening on vifx.y or bridge) gives (every 5 to
> 10  seconds):
> ....
> 14:17:29.922210 ARP, Ethernet (len 6), IPv4 (len 4), Request who-has
> tell, length 28
> 14:17:29.922304 ARP, Ethernet (len 6), IPv4 (len 4), Reply
> is-at 00:09:6b:89:d0:8a, length 46
> ....
> but no icmp traffic at all !

At this point I'd start with using known-good setup first, since it
can save a lot of time. Try using 2.6.34 + the patch I mentioned
earlier for both dom0 and PV domU.


Xen-users mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.