[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] max utilization


  • To: Jonathan Ludlam <Jonathan.Ludlam@xxxxxxxxxxxxx>
  • From: balakrishna <balakrishna3283@xxxxxxxxx>
  • Date: Tue, 19 Oct 2010 06:25:40 -0700
  • Cc: "Xen-users@xxxxxxxxxxxxxxxxxxx" <Xen-users@xxxxxxxxxxxxxxxxxxx>
  • Delivery-date: Tue, 19 Oct 2010 06:33:27 -0700
  • Domainkey-signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type; b=vGuGCn4oTWEX18ULX8tXvlzyma2KJuhgETsxDw9AFJSBvWKm0qcnf3Is23FXP2D3mQ QnDJvCy/0r8H2ka8KpPwd29wGNx7zhIdEI9B9bErCJVDRUQJk9BC/TkhonXwVgA19cpm A3fUrW+y3nAYsN7dCW9b5fgNSIc0ZqnDhYgXc=
  • List-id: Xen user discussion <xen-users.lists.xensource.com>

thank you somuch......:)


Regards,
Balakrishna B
Â







On Tue, Oct 19, 2010 at 6:08 AM, Jonathan Ludlam <Jonathan.Ludlam@xxxxxxxxxxxxx> wrote:
Heh, fair enough :-)

In which case, if 752M is enough then:

xe vm-memory-dynamic-range-set uuid=<uuid> min=752MiB max=752MiB

otherwise, edit /boot/extlinux.conf to bump up the dom0_mem to a larger number, then reboot. You may have to do the above command once you've rebooted.

For more CPUs, you'll need to try the beta of 5.6-FP1, which has some fixes for multi-vcpu dom0.

Jon


On 19 Oct 2010, at 13:36, balakrishna wrote:


actly my scenario is i am testing network driver for our 10G NIC card. for that i have inserted our 10G card in xenserver machine & installed our driver in order to test that need to send heavy traffic from physical host (xenserver) to peer(linux machine). in that case if i send heavy traffic host is getting hang. for that purpose i want to giv more memory & cpu to dom0 .

thanks
balakrishna.


On Tue, Oct 19, 2010 at 6:01 PM, Jonathan Ludlam <Jonathan.Ludlam@xxxxxxxxxxxxx> wrote:
I don't think you want to do that.

dom0 is intended to be lightweight so as to leave as many resources as possible for your VMs. For example, your VMs will are only able to use what's left of your memory, so we try hard to keep dom0's memory usage to a minimum.

In your case, dom0 is taking about 550 megs, leaving your VMs about 15.5 gigs to use.Â

Jon


On 19 Oct 2010, at 13:05, balakrishna wrote:

hi,

--> i have 8cores cpu. but my xenserver is using only one cpu, how to make use of all cpu cores

--> machine is having 16G ram but domain0 is having very less memory. is there any way to increase memory for domain0

[root@xenserver-DZONGRI ~]# cat /proc/meminfo
MemTotal:ÂÂÂÂÂÂ 574464 kB
MemFree:ÂÂÂÂÂÂÂ 111776 kB
Buffers:ÂÂÂÂÂÂÂÂÂ 9500 kB
Cached:ÂÂÂÂÂÂÂÂ 117320 kB
SwapCached:ÂÂÂÂÂÂÂ 100 kB
Active:ÂÂÂÂÂÂÂÂÂ 79220 kB
Inactive:ÂÂÂÂÂÂÂ 93112 kB
HighTotal:ÂÂÂÂÂÂÂÂÂÂ 0 kB
HighFree:ÂÂÂÂÂÂÂÂÂÂÂ 0 kB
LowTotal:ÂÂÂÂÂÂ 574464 kB
LowFree:ÂÂÂÂÂÂÂ 111776 kB
SwapTotal:ÂÂÂÂÂ 524280 kB
SwapFree:ÂÂÂÂÂÂ 524180 kB
Dirty:ÂÂÂÂÂÂÂÂÂÂÂÂÂÂ 4 kB
Writeback:ÂÂÂÂÂÂÂÂÂÂ 0 kB
AnonPages:ÂÂÂÂÂÂ 45436 kB
Mapped:ÂÂÂÂÂÂÂÂÂ 16700 kB
Slab:ÂÂÂÂÂÂÂÂÂÂ 185236 kB
SReclaimable:ÂÂÂÂ 4304 kB
SUnreclaim:ÂÂÂÂ 180932 kB
PageTables:ÂÂÂÂÂÂÂÂÂ 0 kB
NFS_Unstable:ÂÂÂÂÂÂÂ 0 kB
Bounce:ÂÂÂÂÂÂÂÂÂÂÂÂÂ 0 kB
WritebackTmp:ÂÂÂÂÂÂÂ 0 kB
CommitLimit:ÂÂÂ 811512 kB
Committed_AS:ÂÂ 610184 kB
VmallocTotal:ÂÂ 233464 kB
VmallocUsed:ÂÂÂÂÂ 4968 kB
VmallocChunk:ÂÂ 228316 kB
DirectMap4k:ÂÂÂ 755452 kB
DirectMap2M:ÂÂÂÂÂÂÂÂ 0 kB

thanks in advacne.

Regards,
Balakrishna B
Â








<ATT00001..txt>




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.