[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] Xen domains will not reboot or destroy as they should be



On Dec 14, 2010, at 12:50 , Jarkko Santala wrote:

> 
> On Dec 14, 2010, at 12:25 , James Harper wrote:
> 
>>> 
>>> Hi all,
>>> 
>>> I'm having a problem with Xen 3.2.1 on Debian 5.0.7 where the Xen
>> domains will
>>> not shutdown or reboot properly. For example, if I do a poweroff from
>> a
>>> paravirtualized domain it just says System halted on the console but
>> nothing
>>> else happens, except the domain status becomes "s". Nothing gets
>> written into
>>> xend.log. I have set on_poweroff = 'destroy' properly, but it seem to
>> have no
>>> effect. Also xm list --long shows the correct options in use. Same
>> thing
>>> happens if I do a reboot. Just get status "s" and no reboot. Another
>> box
>>> installed the same way with same versions seems to work perfectly. Any
>> ideas?
>>> 
>> 
>> Do you specify dom0-cpus=1 in your xen config? If so, it causes a
>> problem that causes events to be missed and things left hanging around
>> which sounds similar to what you are seeing. I'm not sure about the
>> version but this sounds very familiar to a bug I encountered once, and
>> spent ages tracking down.
>> 
>> I highly recommend running a newer version of Xen where this bug is
>> fixed, but otherwise just don't specify dom0-cpus=1.
> 
> That is indeed true! I had it enabled and I already commented it out, 
> thinking that it might be causing problems (and it didn't even work - xentop 
> still showed dom0 using all 8 logical cores), but I haven't rebooted yet, so 
> I didn't know that it might solve this issue. Thanks!

I have now rebooted the box and it seems that this was indeed the problem. Now 
that dom0-cpus is set back to 0 domains are rebooting normally.

I gave testing/squeeze a quick look, updating an unused Debian 5 Xen box, but 
it seemed like a bit of a hassle at this time, even though 4.0 does seem 
tempting. Hopefully they'll get 6 released sooner than later.

        -jake

> I don't know if the same setting is the reason for another bug I ran into - I 
> tried running some other xm commands instead of destroy on one of these 
> domains in "s" limbo and what happened was that it started spawning as many 
> copies of that domU as it could fit into memory - killing them would spawn 
> another one in the freed memory. The situation finally resolved itself after 
> I had ran xm destroy in a loop, but I was unable to start any new domUs after 
> that until I rebooted. Not sure which xm command set it off in the first 
> place.
> 
>       -jake
> 
> 
> 
> 
>> 
>> James
> 
> -- 
> Jarkko Santala <jake&portalify,com>   http://www.portalify.com
> System Administrator
> 
> 
> 

-- 
Jarkko Santala <jake&portalify,com>   http://www.portalify.com
System Administrator




_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.