[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Re: [Xen-users] Hypervisor hangs on startup, 2.6.32-5-xen dom0 kernel panic



-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

> This suggests that the xen_exchange_memory hypercall has failed for some
> reason.
> 
> -12 is -ENOMEM but size is only 64M and this is start of day so I can't
> think why this would be the case (or at least why it wouldn't always be
> the case if it was happening at all).

I was speaking earlier today to Pasi about this bug again by accident.
There he asked whether I did try to boot the xen-4.0-testing tree. Now I
did, as I built the most recent -testing snapshot and I have some more
to add:

Booting the Xen hypervisor in version 4.0.2-rc1-pre built by myself on
the affected system resulted in no failure for Debian's stock
2.6.32-5-xen-amd64 kernel. Jeremy's xen tree at
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen.git (resulting
in 2.6.32.27) failed to boot, but that is my fault as I was too lazy to
build an appropriate .config. So this is NOT related to the bug.

So the question is now, whether there was a bug in 4.0.1 that has been
fixed in -testing which fixes this one as well (or if it is a duplicate
perhaps?), or if Debian introduced that bug. Would someone mind finding
this out together with me?

Serial output is now:

__  __            _  _    ___   ____              _


 \ \/ /___ _ __   | || |  / _ \ |___ \    _ __ ___/ |   _ __  _ __ ___


  \  // _ \ '_ \  | || |_| | | |  __) |__| '__/ __| |__| '_ \| '__/ _ \


  /  \  __/ | | | |__   _| |_| | / __/|__| | | (__| |__| |_) | | |  __/


 /_/\_\___|_| |_|    |_|(_)___(_)_____|  |_|  \___|_|  | .__/|_|  \___|


                                                       |_|


(XEN) Xen version 4.0.2-rc1-pre (root@xxxxxxxxxxxxxxx) (gcc version
4.4.5 (Debian 4.4.5-8) ) Wed Jan  5 08:31:44 EST 2011

(XEN) Latest ChangeSet: Fri Dec 24 10:29:50 2010 +0000
21422:714d808e57bb

(XEN) Bootloader: GRUB 1.98+20100804-10


(XEN) Command line: placeholder console=com2


(XEN) Video information:


(XEN)  VGA is text mode 80x25, font 8x16


(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds


(XEN)  EDID info not retrieved because no DDC retrieval method detected


(XEN) Disc information:


(XEN)  Found 1 MBR signatures


(XEN)  Found 1 EDD information structures


(XEN) Xen-e820 RAM map:


(XEN)  0000000000000000 - 00000000000a0000 (usable)


(XEN)  0000000000100000 - 000000007f679000 (usable)


(XEN)  000000007f679000 - 000000007f68f000 (reserved)


(XEN)  000000007f68f000 - 000000007f6ce000 (ACPI data)


(XEN)  000000007f6ce000 - 0000000080000000 (reserved)


(XEN)  00000000e0000000 - 00000000f0000000 (reserved)


(XEN)  00000000fe000000 - 0000000100000000 (reserved)


(XEN)  0000000100000000 - 0000000c80000000 (usable)


(XEN) ACPI: RSDP 000F0A90, 0024 (r2 DELL  )


(XEN) ACPI: XSDT 000F0B94, 009C (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: FACP 7F6B3F9C, 00F4 (r3 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: DSDT 7F68F000, 3D5A (r1 DELL   PE_SC3          1 INTL
20050624)

(XEN) ACPI: FACS 7F6B6000, 0040


(XEN) ACPI: APIC 7F6B3478, 015E (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: SPCR 7F6B35D8, 0050 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: HPET 7F6B362C, 0038 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: DMAR 7F6B3668, 01C0 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: MCFG 7F6B38C4, 003C (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: WD__ 7F6B3904, 0134 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: SLIC 7F6B3A3C, 0024 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: ERST 7F692EDC, 0270 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: HEST 7F69314C, 03A8 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: BERT 7F692D5C, 0030 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: EINJ 7F692D8C, 0150 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: SRAT 7F6B3BC0, 0370 (r1 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: TCPA 7F6B3F34, 0064 (r2 DELL   PE_SC3          1 DELL
 1)

(XEN) ACPI: SSDT 7F6B7000, 43F4 (r1  INTEL PPM RCM  80000001 INTL
20061109)

(XEN) System RAM: 49142MB (50321508kB)


(XEN) Domain heap initialised DMA width 32 bits


(XEN) Processor #16 7:10 APIC version 21


(XEN) Processor #0 7:10 APIC version 21


(XEN) Processor #18 7:10 APIC version 21


(XEN) Processor #2 7:10 APIC version 21


(XEN) Processor #20 7:10 APIC version 21


(XEN) Processor #4 7:10 APIC version 21


(XEN) Processor #22 7:10 APIC version 21


(XEN) Processor #6 7:10 APIC version 21


(XEN) Processor #17 7:10 APIC version 21


(XEN) Processor #1 7:10 APIC version 21


(XEN) Processor #19 7:10 APIC version 21


(XEN) Processor #3 7:10 APIC version 21


(XEN) Processor #21 7:10 APIC version 21


(XEN) Processor #5 7:10 APIC version 21


(XEN) Processor #23 7:10 APIC version 21


(XEN) Processor #7 7:10 APIC version 21


(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23


(XEN) IOAPIC[1]: apic_id 1, version 32, address 0xfec80000, GSI 32-55


(XEN) Enabling APIC mode:  Phys.  Using 2 I/O APICs


(XEN) Using scheduler: SMP Credit Scheduler (credit)


(XEN) Detected 2394.088 MHz processor.


(XEN) Initing memory sharing.


(XEN) VMX: Supported advanced features:


(XEN)  - APIC MMIO access virtualisation


(XEN)  - APIC TPR shadow


(XEN)  - Extended Page Tables (EPT)


(XEN)  - Virtual-Processor Identifiers (VPID)


(XEN)  - Virtual NMI


(XEN)  - MSR direct-access bitmap


(XEN) EPT supports 2MB super page.


(XEN) HVM: ASIDs enabled.


(XEN) HVM: VMX enabled


(XEN) HVM: Hardware Assisted Paging detected.


(XEN) Intel VT-d Snoop Control enabled.


(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.


(XEN) Intel VT-d Queued Invalidation enabled.


(XEN) Intel VT-d Interrupt Remapping enabled.


(XEN) I/O virtualisation enabled


(XEN)  - Dom0 mode: Relaxed


(XEN) Total of 16 processors activated.


(XEN) ENABLING IO-APIC IRQs


(XEN)  -> Using new ACK method


(XEN) TSC is reliable, synchronization unnecessary


(XEN) Platform timer is 14.318MHz HPET


ï(XEN) Allocated console ring of 32 KiB.


(XEN) Brought up 16 CPUs


(XEN) *** LOADING DOMAIN 0 ***


(XEN)  Xen  kernel: 64-bit, lsb, compat32


(XEN)  Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16b6000


(XEN) PHYSICAL MEMORY ARRANGEMENT:


(XEN)  Dom0 alloc.:   0000000c50000000->0000000c60000000 (12319770 pages
to be allocated)

(XEN) VIRTUAL MEMORY ARRANGEMENT:


(XEN)  Loaded kernel: ffffffff81000000->ffffffff816b6000


(XEN)  Init. ramdisk: ffffffff816b6000->ffffffff83064200


(XEN)  Phys-Mach map: ffffffff83065000->ffffffff88ee30d0


(XEN)  Start info:    ffffffff88ee4000->ffffffff88ee44b4


(XEN)  Page tables:   ffffffff88ee5000->ffffffff88f30000


(XEN)  Boot stack:    ffffffff88f30000->ffffffff88f31000


(XEN)  TOTAL:         ffffffff80000000->ffffffff89000000


(XEN)  ENTRY ADDRESS: ffffffff81506200


(XEN) Dom0 has maximum 16 VCPUs


(XEN) Scrubbing Free RAM: .done.


(XEN) Xen trace buffers: disabled


(XEN) Std. Loglevel: Errors and warnings


(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)


(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)

(XEN) Freed 176kB init memory.


mapping kernel into physical memory


Xen: setup ISA identity maps


about to get started...


[    0.000000] Initializing cgroup subsys cpuset


[    0.000000] Initializing cgroup subsys cpu


[    0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29)
(ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri
Dec 10 17:41:50 UT0
[    0.000000] Command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug debug lo
[    0.000000] KERNEL supported cpus:


[    0.000000]   Intel GenuineIntel


[    0.000000]   AMD AuthenticAMD


[    0.000000]   Centaur CentaurHauls


[    0.000000] xen_release_chunk: looking at area pfn 80000-e0000:
393216 pages freed

[    0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344
pages freed

[    0.000000] xen_release_chunk: looking at area pfn 800000-bcfc1a: 0
pages freed

[    0.000000] released 450560 pages of unused memory


[    0.000000] BIOS-provided physical RAM map:


[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)


[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)


[    0.000000]  Xen: 0000000000100000 - 000000007f679000 (usable)


[    0.000000]  Xen: 000000007f679000 - 000000007f68f000 (reserved)


[    0.000000]  Xen: 000000007f68f000 - 000000007f6ce000 (ACPI data)


[    0.000000]  Xen: 000000007f6ce000 - 0000000080000000 (reserved)


[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)


[    0.000000]  Xen: 00000000fe000000 - 0000000100000000 (reserved)


[    0.000000]  Xen: 0000000100000000 - 0000000800000000 (usable)


[    0.000000] bootconsole [xenboot0] enabled


[    0.000000] DMI 2.6 present.


[    0.000000] last_pfn = 0x800000 max_arch_pfn = 0x400000000


[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106

[    0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000


[    0.000000] initial memory mapped : 0 - 20000000


[    0.000000] init_memory_mapping: 0000000000000000-000000007f679000


[    0.000000]  0000000000 - 007f679000 page 4k


[    0.000000] kernel direct mapping tables up to 7f679000 @
100000-4ff000

[    0.000000] init_memory_mapping: 0000000100000000-0000000800000000


[    0.000000]  0100000000 - 0800000000 page 4k


[    0.000000] kernel direct mapping tables up to 800000000 @
8f30000-cf51000

[    0.000000] RAMDISK: 016b6000 - 03064200


[    0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL  )


[    0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL   PE_SC3
00000001 INTL 20050624)

[    0.000000] ACPI: FACS 000000007f6b6000 00040


[    0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: XMAR 000000007f6b3668 001C0 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SSDT 000000007f6b7000 043F4 (v01  INTEL PPM RCM
80000001 INTL 20061109)

[    0.000000] ACPI: Local APIC address 0xfee00000


[    0.000000] No NUMA configuration found


[    0.000000] Faking a node at 0000000000000000-0000000800000000


[    0.000000] Bootmem setup node 0 0000000000000000-0000000800000000


[    0.000000]   NODE_DATA [0000000000008000 - 000000000000ffff]


[    0.000000]   bootmap [00000000004b1000 -  00000000005b0fff] pages
100

[    0.000000] (9 early reservations) ==> bootmem [0000000000 -
0800000000]

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
[0000000000 - 0000001000]

[    0.000000]   #1 [0008ee5000 - 0008f30000]   XEN PAGETABLES ==>
[0008ee5000 - 0008f30000]

[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==>
[0000006000 - 0000008000]

[    0.000000]   #3 [0001000000 - 0001695994]    TEXT DATA BSS ==>
[0001000000 - 0001695994]

[    0.000000]   #4 [00016b6000 - 0003064200]          RAMDISK ==>
[00016b6000 - 0003064200]

[    0.000000]   #5 [0003065000 - 0008ee5000]   XEN START INFO ==>
[0003065000 - 0008ee5000]

[    0.000000]   #6 [0001696000 - 00016964fd]              BRK ==>
[0001696000 - 00016964fd]

[    0.000000]   #7 [0000100000 - 00004b1000]          PGTABLE ==>
[0000100000 - 00004b1000]

[    0.000000]   #8 [0008f30000 - 000c74c000]          PGTABLE ==>
[0008f30000 - 000c74c000]

[    0.000000] found SMP MP-table at [ffff8800000fe710] fe710


[    0.000000] Zone PFN ranges:


[    0.000000]   DMA      0x00000000 -> 0x00001000


[    0.000000]   DMA32    0x00001000 -> 0x00100000


[    0.000000]   Normal   0x00100000 -> 0x00800000


[    0.000000] Movable zone start PFN for each node


[    0.000000] early_node_map[3] active PFN ranges


[    0.000000]     0: 0x00000000 -> 0x000000a0


[    0.000000]     0: 0x00000100 -> 0x0007f679


[    0.000000]     0: 0x00100000 -> 0x00800000


[    0.000000] On node 0 totalpages: 7861785


[    0.000000]   DMA zone: 56 pages used for memmap


[    0.000000]   DMA zone: 948 pages reserved


[    0.000000]   DMA zone: 2996 pages, LIFO batch:0


[    0.000000]   DMA32 zone: 14280 pages used for memmap


[    0.000000]   DMA32 zone: 503473 pages, LIFO batch:31


[    0.000000]   Normal zone: 100352 pages used for memmap


[    0.000000]   Normal zone: 7239680 pages, LIFO batch:31


[    0.000000] ACPI: PM-Timer IO Port: 0x808


[    0.000000] ACPI: Local APIC address 0xfee00000


[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)


[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])


[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])


[    0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI
0-0

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])


[    0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI
32-32

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)


[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2


[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)

[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9


[    0.000000] Using ACPI (MADT) for SMP configuration information


[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000


[    0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs


[    0.000000] nr_irqs_gsi: 288


[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000

[    0.000000] PM: Registered nosave memory: 000000007f679000 -
000000007f68f000

[    0.000000] PM: Registered nosave memory: 000000007f68f000 -
000000007f6ce000

[    0.000000] PM: Registered nosave memory: 000000007f6ce000 -
0000000080000000

[    0.000000] PM: Registered nosave memory: 0000000080000000 -
00000000e0000000

[    0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000

[    0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fe000000

[    0.000000] PM: Registered nosave memory: 00000000fe000000 -
0000000100000000

[    0.000000] Allocating PCI resources starting at 80000000 (gap:
80000000:60000000)

[    0.000000] Booting paravirtualized kernel on Xen


[    0.000000] Xen version: 4.0.2-rc1-pre (preserve-AD) (dom0)


[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16
nr_node_ids:1

[    0.000000] PERCPU: Embedded 30 pages/cpu @ffff88002804f000 s90328
r8192 d24360 u122880

[    0.000000] pcpu-alloc: s90328 r8192 d24360 u122880 alloc=30*4096


[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0]
06 [0] 07

[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0]
14 [0] 15

[    6.923660] trying to map vcpu_info 0 at ffff88002805a020, mfn
81805a, offset 32

[    6.923665] cpu 0 using vcpu_info at ffff88002805a020


[    6.923667] trying to map vcpu_info 1 at ffff880028078020, mfn
818078, offset 32

[    6.923671] cpu 1 using vcpu_info at ffff880028078020


[    6.923673] trying to map vcpu_info 2 at ffff880028096020, mfn
818096, offset 32

[    6.923676] cpu 2 using vcpu_info at ffff880028096020


[    6.923678] trying to map vcpu_info 3 at ffff8800280b4020, mfn
8180b4, offset 32

[    6.923682] cpu 3 using vcpu_info at ffff8800280b4020


[    6.923684] trying to map vcpu_info 4 at ffff8800280d2020, mfn
8180d2, offset 32

[    6.923687] cpu 4 using vcpu_info at ffff8800280d2020


[    6.923690] trying to map vcpu_info 5 at ffff8800280f0020, mfn
8180f0, offset 32

[    6.923693] cpu 5 using vcpu_info at ffff8800280f0020


[    6.923695] trying to map vcpu_info 6 at ffff88002810e020, mfn
81810e, offset 32

[    6.923698] cpu 6 using vcpu_info at ffff88002810e020


[    6.923701] trying to map vcpu_info 7 at ffff88002812c020, mfn
81812c, offset 32

[    6.923704] cpu 7 using vcpu_info at ffff88002812c020


[    6.923706] trying to map vcpu_info 8 at ffff88002814a020, mfn
81814a, offset 32

[    6.923709] cpu 8 using vcpu_info at ffff88002814a020


[    6.923712] trying to map vcpu_info 9 at ffff880028168020, mfn
818168, offset 32

[    6.923715] cpu 9 using vcpu_info at ffff880028168020


[    6.923717] trying to map vcpu_info 10 at ffff880028186020, mfn
818186, offset 32

[    6.923720] cpu 10 using vcpu_info at ffff880028186020


[    6.923723] trying to map vcpu_info 11 at ffff8800281a4020, mfn
8181a4, offset 32

[    6.923726] cpu 11 using vcpu_info at ffff8800281a4020


[    6.923728] trying to map vcpu_info 12 at ffff8800281c2020, mfn
8181c2, offset 32

[    6.923731] cpu 12 using vcpu_info at ffff8800281c2020


[    6.923734] trying to map vcpu_info 13 at ffff8800281e0020, mfn
8181e0, offset 32

[    6.923737] cpu 13 using vcpu_info at ffff8800281e0020


[    6.923739] trying to map vcpu_info 14 at ffff8800281fe020, mfn
8181fe, offset 32

[    6.923742] cpu 14 using vcpu_info at ffff8800281fe020


[    6.923745] trying to map vcpu_info 15 at ffff88002821c020, mfn
81821c, offset 32

[    6.923748] cpu 15 using vcpu_info at ffff88002821c020


[    6.923750] Xen: using vcpu_info placement


[    6.923755] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 7746149

[    6.923758] Policy zone: Normal


[    6.923761] Kernel command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug o
[    6.923811] PID hash table entries: 4096 (order: 3, 32768 bytes)


[    6.924136] Initializing CPU#0


[    6.932756] DMA: Placing 64MB software IO TLB between
ffff880020000000 - ffff880024000000

[    6.932764] DMA: software IO TLB at phys 0x20000000 - 0x24000000


[    6.932767] xen_swiotlb_fixup: buf=ffff880020000000 size=67108864


[    6.951766] xen_swiotlb_fixup: buf=ffff880024060000 size=32768


[    7.076245] Memory: 30756556k/33554432k available (3146k kernel code,
2107292k absent, 690584k reserved, 1901k data, 600k init)

[    7.076285] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0,
CPUs=16, Nodes=1

[    7.076341] Hierarchical RCU implementation.


[    7.076355] NR_IRQS:4352 nr_irqs:4352


[    7.076472] xen: --> irq=0


[    7.076483] xen: --> irq=1


[    7.076491] xen: --> irq=2


[    7.076499] xen: --> irq=3


[    7.076507] xen: --> irq=4


[    7.076515] xen: --> irq=5


[    7.076522] xen: --> irq=6


[    7.076530] xen: --> irq=7


[    7.076538] xen: --> irq=8


[    7.076545] xen: --> irq=9


[    7.076553] xen: --> irq=10


[    7.076561] xen: --> irq=11


[    7.076569] xen: --> irq=12


[    7.076577] xen: --> irq=13


[    7.076584] xen: --> irq=14


[    7.076592] xen: --> irq=15


[    7.076609] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)


[    7.076612] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)

[    7.076615] xen: sci override: source_irq=9 global_irq=9 trigger=c
polarity=1

[    7.076618] xen: registering gsi 9 triggering 0 polarity 0


[    7.076620] xen_allocate_pirq: returning irq 9 for gsi 9


[    7.076622] xen: --> irq=9


[    7.076656] xen: acpi sci 9


[    7.082825] Console: colour VGA+ 80x25


[    7.082829] console [hvc0] enabled, bootconsole disabled


[    7.082829] console [hvc0] enabled, bootconsole disabled


[    0.000000] Initializing cgroup subsys cpuset


[    0.000000] Initializing cgroup subsys cpu


[    0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-29)
(ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri
Dec 10 17:41:50 UT0
[    0.000000] Command line: placeholder
root=UUID=488ac918-6644-46f9-bc1b-4e7d5918a47f ro console=ttyS1
console=hvc0 earlyprintk=xen initcall_debug debug lo
[    0.000000] KERNEL supported cpus:


[    0.000000]   Intel GenuineIntel


[    0.000000]   AMD AuthenticAMD


[    0.000000]   Centaur CentaurHauls


[    0.000000] xen_release_chunk: looking at area pfn 80000-e0000:
393216 pages freed

[    0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344
pages freed

[    0.000000] xen_release_chunk: looking at area pfn 800000-bcfc1a: 0
pages freed

[    0.000000] released 450560 pages of unused memory


[    0.000000] BIOS-provided physical RAM map:


[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)


[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)


[    0.000000]  Xen: 0000000000100000 - 000000007f679000 (usable)


[    0.000000]  Xen: 000000007f679000 - 000000007f68f000 (reserved)


[    0.000000]  Xen: 000000007f68f000 - 000000007f6ce000 (ACPI data)


[    0.000000]  Xen: 000000007f6ce000 - 0000000080000000 (reserved)


[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)


[    0.000000]  Xen: 00000000fe000000 - 0000000100000000 (reserved)


[    0.000000]  Xen: 0000000100000000 - 0000000800000000 (usable)


[    0.000000] bootconsole [xenboot0] enabled


[    0.000000] DMI 2.6 present.


[    0.000000] last_pfn = 0x800000 max_arch_pfn = 0x400000000


[    0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new
0x7010600070106

[    0.000000] last_pfn = 0x7f679 max_arch_pfn = 0x400000000


[    0.000000] initial memory mapped : 0 - 20000000


[    0.000000] init_memory_mapping: 0000000000000000-000000007f679000


[    0.000000]  0000000000 - 007f679000 page 4k


[    0.000000] kernel direct mapping tables up to 7f679000 @
100000-4ff000

[    0.000000] init_memory_mapping: 0000000100000000-0000000800000000


[    0.000000]  0100000000 - 0800000000 page 4k


[    0.000000] kernel direct mapping tables up to 800000000 @
8f30000-cf51000

[    0.000000] RAMDISK: 016b6000 - 03064200


[    0.000000] ACPI: RSDP 00000000000f0a90 00024 (v02 DELL  )


[    0.000000] ACPI: XSDT 00000000000f0b94 0009C (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: FACP 000000007f6b3f9c 000F4 (v03 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: DSDT 000000007f68f000 03D5A (v01 DELL   PE_SC3
00000001 INTL 20050624)

[    0.000000] ACPI: FACS 000000007f6b6000 00040


[    0.000000] ACPI: APIC 000000007f6b3478 0015E (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SPCR 000000007f6b35d8 00050 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: HPET 000000007f6b362c 00038 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: XMAR 000000007f6b3668 001C0 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: MCFG 000000007f6b38c4 0003C (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: WD__ 000000007f6b3904 00134 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SLIC 000000007f6b3a3c 00024 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: ERST 000000007f692edc 00270 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: HEST 000000007f69314c 003A8 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: BERT 000000007f692d5c 00030 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: EINJ 000000007f692d8c 00150 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SRAT 000000007f6b3bc0 00370 (v01 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: TCPA 000000007f6b3f34 00064 (v02 DELL   PE_SC3
00000001 DELL 00000001)

[    0.000000] ACPI: SSDT 000000007f6b7000 043F4 (v01  INTEL PPM RCM
80000001 INTL 20061109)

[    0.000000] ACPI: Local APIC address 0xfee00000


[    0.000000] No NUMA configuration found


[    0.000000] Faking a node at 0000000000000000-0000000800000000


[    0.000000] Bootmem setup node 0 0000000000000000-0000000800000000


[    0.000000]   NODE_DATA [0000000000008000 - 000000000000ffff]


[    0.000000]   bootmap [00000000004b1000 -  00000000005b0fff] pages
100

[    0.000000] (9 early reservations) ==> bootmem [0000000000 -
0800000000]

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
[0000000000 - 0000001000]

[    0.000000]   #1 [0008ee5000 - 0008f30000]   XEN PAGETABLES ==>
[0008ee5000 - 0008f30000]

[    0.000000]   #2 [0000006000 - 0000008000]       TRAMPOLINE ==>
[0000006000 - 0000008000]

[    0.000000]   #3 [0001000000 - 0001695994]    TEXT DATA BSS ==>
[0001000000 - 0001695994]

[    0.000000]   #4 [00016b6000 - 0003064200]          RAMDISK ==>
[00016b6000 - 0003064200]

[    0.000000]   #5 [0003065000 - 0008ee5000]   XEN START INFO ==>
[0003065000 - 0008ee5000]

[    0.000000]   #6 [0001696000 - 00016964fd]              BRK ==>
[0001696000 - 00016964fd]

[    0.000000]   #7 [0000100000 - 00004b1000]          PGTABLE ==>
[0000100000 - 00004b1000]

[    0.000000]   #8 [0008f30000 - 000c74c000]          PGTABLE ==>
[0008f30000 - 000c74c000]

[    0.000000] found SMP MP-table at [ffff8800000fe710] fe710


[    0.000000] Zone PFN ranges:


[    0.000000]   DMA      0x00000000 -> 0x00001000


[    0.000000]   DMA32    0x00001000 -> 0x00100000


[    0.000000]   Normal   0x00100000 -> 0x00800000


[    0.000000] Movable zone start PFN for each node


[    0.000000] early_node_map[3] active PFN ranges


[    0.000000]     0: 0x00000000 -> 0x000000a0


[    0.000000]     0: 0x00000100 -> 0x0007f679


[    0.000000]     0: 0x00100000 -> 0x00800000


[    0.000000] On node 0 totalpages: 7861785


[    0.000000]   DMA zone: 56 pages used for memmap


[    0.000000]   DMA zone: 948 pages reserved


[    0.000000]   DMA zone: 2996 pages, LIFO batch:0


[    0.000000]   DMA32 zone: 14280 pages used for memmap


[    0.000000]   DMA32 zone: 503473 pages, LIFO batch:31


[    0.000000]   Normal zone: 100352 pages used for memmap


[    0.000000]   Normal zone: 7239680 pages, LIFO batch:31


[    0.000000] ACPI: PM-Timer IO Port: 0x808


[    0.000000] ACPI: Local APIC address 0xfee00000


[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x06] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x01] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x15] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x05] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x07] enabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)


[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)


[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])


[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])


[    0.000000] IOAPIC[0]: apic_id 0, version 0, address 0xfec00000, GSI
0-0

[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])


[    0.000000] IOAPIC[1]: apic_id 1, version 0, address 0xfec80000, GSI
32-32

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)


[    0.000000] ERROR: Unable to locate IOAPIC for GSI 2


[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)

[    0.000000] ERROR: Unable to locate IOAPIC for GSI 9


[    0.000000] Using ACPI (MADT) for SMP configuration information


[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000


[    0.000000] SMP: Allowing 16 CPUs, 0 hotplug CPUs


[    0.0[    7.806935] scsi 0:2:0:0: Direct-Access     DELL     PERC
H700        2.30 PQ: 0 ANSI: 5

[    7.810109] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00


[    7.810271] usb usb3: New USB device found, idVendor=1d6b,
idProduct=0002

[    7.810419] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[    7.810576] usb usb3: Product: EHCI Host Controller


[    7.810685] usb usb3: Manufacturer: Linux 2.6.32-5-xen-amd64 ehci_hcd


[    7.810826] usb usb3: SerialNumber: 0000:00:1d.7


[    7.810996] usb usb3: configuration #1 chosen from 1 choice


[    7.811153] hub 3-0:1.0: USB hub found


[    7.811253] hub 3-0:1.0: 4 ports detected


[    7.811404] initcall ehci_hcd_init+0x0/0x7c [ehci_hcd] returned 0
after 202824 usecs

[    7.811408] xen: registering gsi 18 triggering 0 polarity 1


[    7.811418]   alloc irq_desc for 18 on node -1


[    7.811420]   alloc kstat_irqs on node -1


[    7.811423] xen: --> irq=18


[    7.811452] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low)
- -> IRQ 18

[    7.811461] uhci_hcd 0000:00:1a.1: setting latency timer to 64


[    7.811464] uhci_hcd 0000:00:1a.1: UHCI Host Controller


[    7.811473] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4

[    7.811555] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000ec60


[    7.811610] usb usb4: New USB device found, idVendor=1d6b,
idProduct=0001

[    7.811612] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[    7.811613] usb usb4: Product: UHCI Host Controller


[    7.811615] usb usb4: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd


[    7.811616] usb usb4: SerialNumber: 0000:00:1a.1


[    7.811670] usb usb4: configuration #1 chosen from 1 choice


[    7.811695] hub 4-0:1.0: USB hub found


[    7.811707] hub 4-0:1.0: 2 ports detected


[    7.811754] xen: registering gsi 21 triggering 0 polarity 1


[    7.811756] xen_allocate_pirq: returning irq 21 for gsi 21


[    7.811757] xen: --> irq=21


[    7.811761] Already setup the GSI :21


[    7.811763] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low)
- -> IRQ 21

[    7.811771] uhci_hcd 0000:00:1d.0: setting latency timer to 64


[    7.811774] uhci_hcd 0000:00:1d.0: UHCI Host Controller


[    7.811782] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5

[    7.811812] uhci_hcd   7.811863] usb usb5: New USB device found,
idVendor=1d6b, idProduct=0001

[    7.811865] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[    7.811866] usb usb5: Product: UHCI Host Controller


[    7.811868] usb usb5: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd


[    7.811869] usb usb5: SerialNumber: 0000:00:1d.0


[    7.811919] usb usb5: configuration #1 chosen from 1 choice


[    7.811941] hub 5-0:1.0: USB hub found


[    7.811953] hub 5-0:1.0: 2 ports detected


[    7.812031] xen: registering gsi 20 triggering 0 polarity 1


[    7.812039]   alloc irq_desc for 20 on node -1


[    7.812040]   alloc kstat_irqs on node -1


[    7.812043] xen: --> irq=20


[    7.812071] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low)
- -> IRQ 20

[    7.812079] uhci_hcd 0000:00:1d.1: setting latency timer to 64


[    7.812083] uhci_hcd 0000:00:1d.1: UHCI Host Controller


[    7.812091] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6

[    7.812171] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000eca0


[    7.812223] usb usb6: New USB device found, idVendor=1d6b,
idProduct=0001

[    7.812225] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1

[    7.812227] usb usb6: Product: UHCI Host Controller


[    7.812228] usb usb6: Manufacturer: Linux 2.6.32-5-xen-amd64 uhci_hcd


[    7.812230] usb usb6: SerialNumber: 0000:00:1d.1


[    7.812282] usb usb6: configuration #1 chosen from 1 choice


[    7.812304] hub 6-0:1.0: USB hub found


[    7.812316] hub 6-0:1.0: 2 ports detected


[    7.812374] initcall uhci_hcd_init+0x0/0xbb [uhci_hcd] returned 0
after 201098 usecs

[    7.818906] calling  enclosure_init+0x0/0x13 [enclosure] @ 394


[    7.819052] initcall enclosure_init+0x0/0x13 [enclosure] returned 0
after 12 usecs

[    7.942611] usb 1-3: new high speed USB device using ehci_hcd and
address 2

[    8.073426] usb 1-3: New USB device found, idVendor=0424,
idProduct=2514

[    8.073596] usb 1-3: New USB device strings: Mfr=0, Product=0,
SerialNumber=0

[    8.073804] usb 1-3: configuration #1 chosen from 1 choice


[    8.074092] hub 1-3:1.0: USB hub found


[    8.074300] hub 1-3:1.0: 3 ports detected


[    8.265170] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)


[    8.290526] ata1.00: ATAPI: TEAC DVD-ROM DV-28SW, R.2A, max UDMA/100


[    8.305404] ata1.00: configured for UDMA/100


[    8.316726] scsi 1:0:0:0: CD-ROM            TEAC     DVD-ROM DV-28SW
 R.2A PQ: 0 ANSI: 5

[    8.545103] usb 5-2: new full speed USB device using uhci_hcd and
address 2

[    8.712878] usb 5-2: New USB device found, idVendor=0624,
idProduct=0248

[    8.713042] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3

[    8.713198] usb 5-2: Product: USB Composite Device-0


[    8.713307] usb 5-2: Manufacturer: Avocent


[    8.713397] usb 5-2: SerialNumber: 20080519


[    8.713554] usb 5-2: configuration #1 chosen from 1 choice


[    8.817107] ata2: failed to resume link (SControl 0)


[    8.828433] ata2: SATA link down (SStatus 4 SControl 0)


[    8.829523] calling  ses_init+0x0/0x35 [ses] @ 394


[    8.832761] calling  init_sd+0x0/0x16b [sd_mod] @ 395


[    8.833072] sd 0:2:0:0: [sda] 4683988992 512-byte logical blocks:
(2.39 TB/2.18 TiB)

[    8.833103] initcall init_sd+0x0/0x16b [sd_mod] returned 0 after 211
usecs

[    8.833497] sd 0:2:0:0: [sda] Write Protect is off


[    8.833613] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08


[    8.833789] sd 0:2:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA

[    8.833874] calling  ata_generic_init+0x0/0x1a [ata_generic] @ 320


[    8.833901] initcall ata_generic_init+0x0/0x1a [ata_generic] returned
0 after 22 usecs

[    8.834583]  sda:calling  hid_init+0x0/0x5c [hid] @ 411


[    8.838023] initcall hid_init+0x0/0x5c [hid] returned 0 after 30
usecs

[    8.840124] calling  hid_init+0x0/0xc7 [usbhid] @ 412


[    8.840313] usbcore: registered new interface driver hiddev


[    8.845103] input: Avocent USB Composite Device-0 as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input1

[    8.845379] generic-usb 0003:0624:0248.0001: input,hidraw0: USB HID
v1.00 Keyboard [Avocent USB Composite Device-0] on
usb-0000:00:1d.0-2/input0
[    8.849044] input: Avocent USB Composite Device-0 as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input2

[    8.849358] generic-usb 0003:0624:0248.0002: input,hidraw1: USB HID
v1.00 Mouse [Avocent USB Composite Device-0] on
usb-0000:00:1d.0-2/input1
[    8.849651] usbcore: registered new interface driver usbhid


[    8.849774] usbhid: v2.6:USB HID core driver


[    8.849874] initcall hid_init+0x0/0xc7 [usbhid] returned 0 after 9406
usecs

[    8.867328]  sda1 sda2


[    8.867814] sd 0:2:0:0: [sda] Attached SCSI disk


[    8.872371] calling  cdrom_init+0x0/0x6a [cdrom] @ 418


[    8.872517] initcall cdrom_init+0x0/0x6a [cdrom] returned 0 after 25
usecs

[    8.874563] calling  init_sr+0x0/0x3f [sr_mod] @ 418


[    8.896171] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray


[    8.896318] Uniform CD-ROM driver Revision: 3.20


[    8.896499] sr 1:0:0:0: Attached scsi CD-ROM sr0


[    8.896616] initcall init_sr+0x0/0x3f [sr_mod] returned 0 after 21422
usecs

[    8.900380] calling  init_sg+0x0/0xc1 [sg] @ 424


[    9.029141] ses 0:0:32:0: Attached Enclosure device


[    9.029179] ses 0:0:32:0: Attached scsi generic sg0 type 13


[    9.029207] sd 0:2:0:0: Attached scsi generic sg1 type 0


[    9.029232] sr 1:0:0:0: Attached scsi generic sg2 type 5


[    9.029237] initcall init_sg+0x0/0xc1 [sg] returned 0 after 125731
usecs

[    9.029794] initcall ses_init+0x0/0x35 [ses] returned 0 after 195464
usecs

[    9.114842] calling  wait_scan_init+0x0/0xd [scsi_wait_scan] @ 429


[    9.114983] initcall wait_scan_init+0x0/0xd [scsi_wait_scan] returned
0 after 0 usecs

[    9.172718] PM: Starting manual resume from disk


[    9.172825] PM: Resume from partition 8:2


[    9.172914] PM: Checking hibernation image.


[    9.173223] PM: Error -22 checking image file


[    9.173331] PM: Resume from disk failed.


[    9.176511] calling  init_mbcache+0x0/0x14 [mbcache] @ 459


[    9.176637] initcall init_mbcache+0x0/0x14 [mbcache] returned 0 after
0 usecs

[    9.178972] calling  journal_init+0x0/0x89 [jbd] @ 459


[    9.179216] initcall journal_init+0x0/0x89 [jbd] returned 0 after 122
usecs

[    9.183388] calling  init_ext3_fs+0x0/0x67 [ext3] @ 459


[    9.183571] initcall init_ext3_fs+0x0/0x67 [ext3] returned 0 after 59
usecs

[    9.190925] kjournald starting.  Commit interval 5 seconds


[    9.190934] EXT3-fs: mounted filesystem with ordered data mode.


INIT: version 2.88 booting


Using makefile-style concurrent boot in runlevel S.


Starting the hotplug events dispatcher: udevd[    9.959461] udev[507]:
starting version 164

.


Synthesizing the initial hotplug events...done.


Waiting for /dev to be fully populated...[   10.101284] calling
xen_acpi_processor_extcntl_init+0x0/0x4a [acpi_processor] @ 524

[   10.101475] initcall xen_acpi_processor_extcntl_init+0x0/0x4a
[acpi_processor] returned 0 after 0 usecs

[   10.114955] calling  acpi_power_meter_init+0x0/0x35 [power_meter] @
582

[   10.115618] ACPI Error: SMBus or IPMI write requires Buffer of length
42, found length 20 (20090903/exfield-286)

[   10.115862] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PMI0._GHL] (Node ffff8807ffc38c20), AE_AML_BUFFER_LIMIT

[   10.116150] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PMI0._PMC] (Node ffff8807ffc38ba0), AE_AML_BUFFER_LIMIT

[   10.116438] ACPI Exception: AE_AML_BUFFER_LIMIT, Evaluating _PMC
(20090903/power_meter-772)

[   10.116670] initcall acpi_power_meter_init+0x0/0x35 [power_meter]
returned 0 after 1523 usecs

[   10.152619] calling  acpi_processor_init+0x0/0x12f [processor] @ 537


[   10.153521] calling  evdev_init+0x0/0xc [evdev] @ 670


[   10.153732] initcall evdev_init+0x0/0xc [evdev] returned 0 after 91
usecs

[   10.157383] calling  serio_raw_init+0x0/0x1a [serio_raw] @ 644


[   10.157541] initcall serio_raw_init+0x0/0x1a [serio_raw] returned 0
after 22 usecs

[   10.158249] calling  dcdbas_init+0x0/0x5d [dcdbas] @ 659


[   10.158258] initcall acpi_processor_init+0x0/0x12f [processor]
returned 0 after 5337 usecs

[   10.158598] calling  pcspkr_init+0x0/0xc [pcspkr] @ 641


[   10.158641] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)

[   10.158647] initcall dcdbas_init+0x0/0x5d [dcdbas] returned 0 after
59 usecs

[   10.159119] input: PC Speaker as
/devices/platform/pcspkr/input/input3

[   10.159317] initcall pcspkr_init+0x0/0xc [pcspkr] returned 0 after
239 usecs

[   10.159793] calling  acpi_button_init+0x0/0x57 [button] @ 573


[   10.160079] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[   10.160324] ACPI: Power Button [PWRF]


[   10.160460] initcall acpi_button_init+0x0/0x57 [button] returned 0
after 491 usecs

[   10.162935] calling  joydev_init+0x0/0xc [joydev] @ 671


[   10.163097] initcall joydev_init+0x0/0xc [joydev] returned 0 after 40
usecs

[   10.303146] calling  psmouse_init+0x0/0x6b [psmouse] @ 645


[   10.303364] initcall psmouse_init+0x0/0x6b [psmouse] returned 0 after
68 usecs

[   10.370828] calling  snd_mem_init+0x0/0x2c [snd_page_alloc] @ 641


[   10.370978] initcall snd_mem_init+0x0/0x2c [snd_page_alloc] returned
0 after 5 usecs

[   10.375157] calling  init_soundcore+0x0/0x9a [soundcore] @ 641


[   10.375307] initcall init_soundcore+0x0/0x9a [soundcore] returned 0
after 17 usecs

[   10.389947] calling  alsa_sound_init+0x0/0x87 [snd] @ 641


[   10.390090] initcall alsa_sound_init+0x0/0x87 [snd] returned 0 after
16 usecs

[   10.506774] calling  alsa_timer_init+0x0/0x169 [snd_timer] @ 641


[   10.506976] initcall alsa_timer_init+0x0/0x169 [snd_timer] returned 0
after 54 usecs

[   10.515813] calling  alsa_pcm_init+0x0/0x67 [snd_pcm] @ 641


[   10.515946] initcall alsa_pcm_init+0x0/0x67 [snd_pcm] returned 0
after 3 usecs

[   10.522768] calling  pcsp_init+0x0/0x1b [snd_pcsp] @ 641


[   10.522892] Error: Driver 'pcspkr' is already registered, aborting...


[   10.523035] initcall pcsp_init+0x0/0x1b [snd_pcsp] returned -16 after
139 usecs

[   10.523195] initcall pcsp_init+0x0/0x1b [snd_pcsp] returned with
error code -16

done.


Setting preliminary keymap...done.


Activating swap...[   10.853970] Adding 46874992k swap on /dev/sda2.
Priority:-1 extents:1 across:46874992k

done.


Checking root file system...fsck from util-linux-ng 2.17.2


/dev/sda1: clean, 113482/3540208 files, 974477/14160156 blocks


done.


[   10.958775] EXT3 FS on sda1, internal journal


Cleaning up ifupdown....


[   11.030255] calling  loop_init+0x0/0x19e [loop] @ 832


[   11.031004] loop: module loaded


[   11.031107] initcall loop_init+0x0/0x19e [loop] returned 0 after 709
usecs

Loading kernel modules...done.


Setting up networking....


Activating lvm and md swap...done.


Checking file systems...fsck from util-linux-ng 2.17.2


done.


Mounting local filesystems...done.


Activating swapfile swap...done.


Cleaning up temporary files....


Setting kernel variables ...done.


Configuring network interfaces...[   11.526815]   alloc irq_desc for
4260 on node -1

[   11.526927]   alloc kstat_irqs on node -1


[   11.527115]   alloc irq_desc for 4259 on node -1


[   11.527217]   alloc kstat_irqs on node -1


[   11.527376]   alloc irq_desc for 4258 on node -1


[   11.527477]   alloc kstat_irqs on node -1


[   11.527636]   alloc irq_desc for 4257 on node -1


[   11.527738]   alloc kstat_irqs on node -1


[   11.527896]   alloc irq_desc for 4256 on node -1


[   11.527997]   alloc kstat_irqs on node -1


[   11.528156]   alloc irq_desc for 4255 on node -1


[   11.528258]   alloc kstat_irqs on node -1


[   11.528417]   alloc irq_desc for 4254 on node -1


[   11.528519]   alloc kstat_irqs on node -1


[   11.528678]   alloc irq_desc for 4253 on node -1


[   11.528779]   alloc kstat_irqs on node -1


[   11.528938]   alloc irq_desc for 4252 on node -1


[   11.529039]   alloc kstat_irqs on node -1


[   11.588647] bnx2: eth0: using MSIX


[   11.590192] ADDRCONF(NETDEV_UP): eth0: link is not ready


done.


Starting portmap daemon....
...



- -- 
mit freundlichen GrÃÃen,
Arno TÃll, BSc.
GnuPG Key-ID: 0x8408D4C4

Wavecon GmbH | Frankenstrasse 9 | 90762 Fuerth
Web: wavecon.de | Mail + Jabber at@xxxxxxxxxx
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
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=OT05
-----END PGP SIGNATURE-----

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.