Re: [Xen-users] [XCP] - XCP -> HCL

[Todd Deshane <todd.deshane@xxxxxxx>]

On Fri, Mar 18, 2011 at 11:29 AM, Marcelo Terra <terradc@xxxxxxxxx> wrote:
> Hi Todd,
>
> Some things tried:
> - Replace the NIC for a RTL8139 (changing modprobe or no) - Same result.
> - Install a new driver (r8169.ko.6.014) - No work.
> - Not able to compile the driver, because this machine does
> not have Internet access.
> - It installs normally acquire ip, but not  communication.
> - When replacing the cable and use an on-board NIC intel e1000e(chipset
> 82567V-2) everything works normally.
>
> Every attempt reboot the server.
> Attempts were made. Still more things I can test if they are suggested.
>

Thanks for the information. Do keep this on list as it may help others
or help others to give suggestions.

Thanks,
Todd

> Thanks
>
> Roberto - São Carlos - SP - Brasil
> 2011/3/17 Todd Deshane <todd.deshane@xxxxxxx>
>>
>> Best to keep the discussion on list maybe others will have suggestions
>> too.
>>
>> You did reboot the server right?
>>
>> Have you tried further debugging? kernel logs, etc.?
>>
>> Are you able to try another NIC?
>>
>> Thanks,
>> Todd
>>
>>
>> > Roberto - São Carlos - SP - Brasil
>> >
>> > 2011/3/17 Todd Deshane <todd.deshane@xxxxxxx>
>> >>
>> >> On Thu, Mar 17, 2011 at 7:06 AM, Marcelo Terra <terradc@xxxxxxxxx>
>> >> wrote:
>> >> > I'm needing to put a network card on a test server XCP 1.0.
>> >> >
>> >> >
>> >> > I'm seeing the citrix hcl (http://hcl.xensource.com) and I'm a doubt. I
>> >> > base
>> >> > that on which version to look for a compatible card?
>> >> >
>> >> > If the kernel is the same as in 5.6.0 FP1, but if the
>> >> > version of XCP uses the hypervisor 3.4.2 neither appears on the list.
>> >> >
>> >> > ps: I had a RTL-8169 but stopped working with update 0.5 for 1.0. It
>> >> > seems that this happened also with those who have upgraded
>> >> > from 5.6.0 to 5.6.0 FP1.
>> >> > I tried
>> >> >
>> >> >
>> >> > to modify  /etc/modprobe.conf inserting "options r8169 use_dac=1", but without effect.
>> >> > Thanks
>> >> >
>> >> Other people have reported that that fix has worked.
>> >>
>> >> For more tips see:
>> >>
>> >>
>> >>
>> >> http://xen.markmail.org/search/?q=xcp+xenserver+from%3A%22Todd+Deshane%22#query:xcp%20xenserver%20from%3A%22Todd%20Deshane%22+page:1+mid:4odnyzjoqaix5e3j+state:results
>> >>
>> >> Hope that helps.
>> >>
>> >> Thanks,
>> >> Todd
>> >>
>> >> > Roberto - São Carlos - SP - Brasil
>> >> > _______________________________________________
>> >> > Xen-users mailing list
>> >> > Xen-users@xxxxxxxxxxxxxxxxxxx
>> >> > http://lists.xensource.com/xen-users
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Todd Deshane
>> >> http://www.linkedin.com/in/deshantm
>> >> http://www.xen.org/products/cloudxen.html
>> >
>> >
>>
>>
>>
>> --
>> Todd Deshane
>> http://www.linkedin.com/in/deshantm
>> http://www.xen.org/products/cloudxen.html
>
>



-- 
Todd Deshane
http://www.linkedin.com/in/deshantm
http://www.xen.org/products/cloudxen.html

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users