[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] pcifront problem in Ubuntu 10.04 domU
Hello Mark, I've installed linux-image-virtual with command "sudo aptitude install linux-image-virtual" and updated grub, but after rebooting, the pci device doesn't appears (lspci). I've seen the dmesg log and nothing about pci frontend devices. El mié, 11-05-2011 a las 10:07 -0700, Mark Pryor escribió: --- On Wed, 5/11/11, Francisco Barrera <francisco.barrera@xxxxxxxxx> wrote: From: Francisco Barrera <francisco.barrera@xxxxxxxxx> Subject: Re: [Xen-users] pcifront problem in Ubuntu 10.04 domU To: xen-users@xxxxxxxxxxxxxxxxxxx Date: Wednesday, May 11, 2011, 9:29 AM Hello Mark, I don't really understand your first question. If it is related with if I use pygrub or dom0 kernel files in the config file from domU, the response is not, I use pygrub. For the second question, I use this kernel because in dom0 I use CentOS,not Ubuntu. Hope this clarify your questions. Besides I told in the first mail, I review dmesg in domU, and the result it looks ok: [ 2.036868] pcifront pci-0: Creating PCI Frontend Bus 0000:00 [ 2.037494] pci 0000:00:00.0: [14e4:164c] type 0 class 0x000200 [ 2.038642] pci 0000:00:00.0: reg 10: [mem 0xd2000000-0xd3ffffff 64bit] [ 2.042682] pci 0000:00:00.0: PME# supported from D3hot D3cold [ 2.042731] pci 0000:00:00.0: PME# disabled [ 2.045954] Initialising Xen virtual ethernet driver. [ 2.142451] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 2.151373] pcifront pci-0: claiming resource 0000:00:00.0/0 [ 2.210242] lp: driver loaded but no devices found [ 2.261647] bnx2: Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.18 (Oct 7, 2010) [ 2.261772] bnx2 0000:00:00.0: enabling device (0000 -> 0002) [ 2.262184] bnx2 0000:00:00.0: Xen PCI enabling IRQ: 19 [ 2.340687] bnx2 0000:00:00.0: eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem d2000000, IRQ 19, node addr 00:10:18:39:9a:f0 Thanks very much. ------------------------------ Try using the linux-image-virtual kernel from standard lucid repos, not the generic kernel from natty-ppa. El mié, 11-05-2011 a las 08:47 -0700, Mark Pryor escribió: --- On Wed, 5/11/11, Francisco Barrera <francisco.barrera@xxxxxxxxx> wrote: From: Francisco Barrera <francisco.barrera@xxxxxxxxx> Subject: [Xen-users] pcifront problem in Ubuntu 10.04 domU To: xen-users@xxxxxxxxxxxxxxxxxxx Date: Wednesday, May 11, 2011, 5:10 AM Hi all, I have a problem when from domU I need to configure a network interface. Kernel driver in use: pciback Kernel modules: bnx2 domU: paravirtual Ubuntu 10.04 with 2.6.37-020637-generic kernel Apparently works fine, because I execute from dom0 when domU is created "xm pci-list Ubuntu" and the result is: domain bus slot func 0x0000 0x09 0x00 0x0 and from domU I execute lspci, it returns: 00:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) ------------------- You are using a PPA kernel from dom0. Did you copy over the modules to domU? What does the PPA kernel provide you that the Lucid kernel can't?
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |