|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] XL Toolstack console doesn't work. XM Toolstackconsoledoes work.
Odd, I did have this issue as well but can't remember for the life of me what I did to solve it. Have you statically compiled all xen bits in the kernel? I'm thinking a module isn't loaded as you are getting the no file error Thanks Ian Tidyhosts UK - Server & Web Specialists W: www.tidyhosts.com E: enquiries@xxxxxxxxxxxxx T: 0871 910 6732 This email and its attachments are scanned by TidyHosts UK. All emails and attachments should also be scanned by the recipient. TidyHosts UK accept no responsibility for any damage caused by any virus attached to this email. This email is confidential and is intended only for the addressee(s). On 18 May 2011, at 16:25, "Iain Kay" <spam@xxxxxxxxxxx> wrote: > Hi Ian, > > Darn I knew there was something I left out on other post. It certainly does > appear to be running: > >>> [root@core-01-fr ~]# ps aux | grep xenconsoled >>> root 4082 0.0 0.1 24640 716 ? SLl 15:40 0:00 >>> xenconsoled --pid-file=/var/run/xenconsoled.pid >>> root 4636 0.0 0.1 61180 780 pts/0 S+ 16:21 0:00 grep >>> xenconsoled > > Not seen this service in prior versions of Xen, though, and have not made any > attempts to configure it. > > Iain > > On 18 May 2011, at 16:18, Ian Tobin wrote: > >> Hi, >> >> >> Is xenconsoled running? >> >> Ian >> >> >> Tidyhosts UK - Server & Web Specialists >> >> W: www.tidyhosts.com >> E: enquiries@xxxxxxxxxxxxx >> T: 0871 910 6732 >> >> This email and its attachments are scanned by TidyHosts UK. All emails and >> attachments should also be scanned by the recipient. TidyHosts UK accept no >> responsibility for any damage caused by any virus attached to this email. >> This email is confidential and is intended only for the addressee(s). >> >> >> >> >> >> >> On 18 May 2011, at 15:46, "Iain Kay" <spam@xxxxxxxxxxx> wrote: >> >>> Hey all, >>> >>> I've been having a strange issue since upgrading to Xen 4.1.0 on CentOS 5.6 >>> host OS. Running on jeremy's 2.6.32.x kernel. >>> >>> Working with the XM Toolstack I am able to create PV domU's and can attach >>> to their consoles. However when I create the same domU with XL Toolstack I >>> am unable to connect to the console, either with XL or XM. >>> >>> Here's my steps I've followed to produce this: >>> >>> ---------------------------------------------------- >>> From a clean boot: >>> ---------------------------------------------------- >>> >>> xl create /etc/xen/truestream >>> >>>>> Parsing config file /etc/xen/truestream >>>>> Daemon running with PID 4647 >>> >>> xl list >>> >>>>> Name ID Mem VCPUs State >>>>> Time(s) >>>>> Domain-0 0 512 2 r----- >>>>> 17.9 >>>>> truestream 2 2048 1 r----- >>>>> 43.8 >>> >>> xm list >>> >>>>> Name ID Mem VCPUs State >>>>> Time(s) >>>>> Domain-0 0 512 2 r----- >>>>> 18.0 >>>>> truestream 2 2048 1 r----- >>>>> 57.1 >>> >>> xl console 2 >>> >>>>> xenconsole: Could not read tty from store: No such file or directory >>> >>> xm console 2 >>> >>>>> xenconsole: Could not read tty from store: No such file or directory >>> >>> shutdown -r now >>> >>> ---------------------------------------------------- >>> Again from a clean boot. >>> ---------------------------------------------------- >>> >>> xm create /etc/xen/truestream >>> >>>>> Using config file "/etc/xen/truestream". >>>>> Started domain truestream (id=1) >>> >>> xm console 1 >>> >>> *jumps to working console* >>> >>> ---------------------------------------------------- >>> Contents of /etc/xen/truestream >>> ---------------------------------------------------- >>> >>> kernel = "/boot/dom_U/ubuntu/10.04/x86_64/vmlinuz" >>> ramdisk = "/boot/dom_U/ubuntu/10.04/x86_64/initrd.gz" >>> builder='linux' >>> memory = 2048 >>> name = "truestream" >>> vcpus = "4" >>> vif = [ 'vifname=truestream,ip=xx.xx.xx.xx' ] >>> disk = [ 'phy:/dev/vg0/www.truestream.co.uk,xvda,w' ] >>> root = "/dev/xvda1 ro" >>> extra = "4" >>> on_poweroff = "destroy" >>> on_reboot = "restart" >>> on_crash = "restart" >>> >>> ----------------------------- >>> >>> Any ideas would be greatly appreciated. FYI I do have the correct line in >>> /etc/inittab. When I create the domU with XM Toolstack the routed >>> networking is fully functional. >>> >>> Cheers in advance for any ideas at all! >>> >>> Iain Kay >>> _______________________________________________ >>> Xen-users mailing list >>> Xen-users@xxxxxxxxxxxxxxxxxxx >>> http://lists.xensource.com/xen-users >>> >> >> >> _______________________________________________ >> Xen-users mailing list >> Xen-users@xxxxxxxxxxxxxxxxxxx >> http://lists.xensource.com/xen-users > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |