Re: [Xen-users] Malfunctioning bridge

["Fajar A. Nugraha" <list@xxxxxxxxx>]

On Mon, Jun 27, 2011 at 4:25 PM, <J.Witvliet@xxxxxxxxx> wrote:
> To simulate different networks, I created dummy ethernet devices, and 
> connected bridges to it.
> All of the bridges are working OK, except ONE: BR2 (for setup, see 
> attachement)

>
> If i ping on the vpn-box (vpn is not setup yet) towards internal firewall or 
> otherway round i see no traffic at all
> ( 172.16.100.1 => 172.16.100.2 OR 172.16.100.2 => 172.16.100.1)
>
> Looked at [internal] firewall, at the bridges, routing, but i'm clue-less….
> Test i've done sofar:
>
> Any suggestion where to look next?

Your picture shows br2 is connected to server's eth1. "brctl show"
from yuor attachment shows br2 is connected to dummy1, not eth1.

-- 
Fajar

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users