[Xen-users] Using of bonded interfaces for xen dom0 (debian)

[Mark Schneider <ms@xxxxxxxxxxxxxxxxxxxxxx>]

Hello,

Where can I find a link (or docs) to *working* network config for xen 4.1.2?

My tests (s. below) were not successful.

Thank you in advance for any hints.

Regards, Mark

# ---
root@xen411dom0:~# cat /etc/network/interfaces
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.

auto lo
iface lo inet loopback

auto bond0
iface bond0 inet static
    ##bridge_ports eth0
    address 192.168.1.150
    netmask 255.255.255.0
    network 192.168.1.0
    broadcast 192.168.1.255
    gateway 192.168.1.1
    slaves eth0 eth2
    bond-mode active-backup
    #bond-mode 802.3ad
    bond-miimon 100
    bond-downdelay 200
    bond-updelay 200

#auto xenbr0
#iface xenbr0 inet static
#    bridge_ports bond0
#    #bridge_ports eth0 eth2
#    address 192.168.1.150
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1

auto bond1
iface bond1 inet static
    ##bridge_ports eth0
    address 10.0.1.150
    netmask 255.255.255.0
    network 10.0.1.0
    broadcast 10.0.1.255
    gateway 10.0.1.1
    slaves eth1 eth3
    bond-mode active-backup
    #bond-mode 802.3ad
    bond-miimon 100
    bond-downdelay 200
    bond-updelay 200


#auto xenbr0
#iface xenbr0 inet static
#    bridge_ports eth0 eth2
#    address 192.168.1.150
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1

#auto xenbr1
#iface xenbr1 inet static
#    bridge_ports eth1
#    address 192.168.1.151
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1
#
#auto xenbr2
#iface xenbr2 inet static
#    bridge_ports eth2
#    address 10.0.1.152
#    broadcast 10.0.1.255
#    netmask 255.255.255.0
#    gateway 10.0.1.1
#
#auto xenbr3
#iface xenbr3 inet static
#    bridge_ports eth3
#    address 10.0.1.153
#    broadcast 10.0.1.255
#    netmask 255.255.255.0
#    gateway 10.0.1.1

# 
----------------------------------------------------------------------------- 

root@xen411dom0:/etc/xen# grep -v "^ *#[^#]" xend-config.sxp

(xend-http-server yes)
(xend-unix-server yes)

(xend-port            8000)

### (network-script network-bridge)
### (network-script 'network-bridge netdev=bond0 antispoof=yes')

(vif-script vif-bridge)

## Use the following if network traffic is routed, as an alternative to the

## Use the following if network traffic is routed with NAT, as an 
alternative
(dom0-min-mem 0)
(dom0-cpus 0)

(vnc-listen '0.0.0.0')
(vncpasswd '')

--
ms@xxxxxxxxxxxxxxxxxxxxxx


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users