Hello Ian,
I have managed to solved every problem described bellow. This was by recompiling the kernel, but this time with the
same 2.6.32-5 Debian Squeeze kernel configuration. The one I am working on is 3.0.0 from Debian.org and the boot
process is slow but normal.
Now at the time of booting kernel 3.0.0 + Dom0 it hangs at: [ Configuring network interfaces... ]
And it never goes on. I have commented lines of static IP address in /etc/network/interfaces
Only left uncommented these ones:
auto lo
iface lo inet loopback
But still the same issue.
Has this something to do with Xen? Or should I edit another file?
Thank you!
Tony.
Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
Date: Mon, 26 Sep 2011 11:29:36 +0100
From: itobin@xxxxxxxxxxxxx
To: dftonywhite@xxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
CC:
Hi,
What kernel as you running?
Thanks
Ian
From: Antonio Colin [mailto:dftonywhite@xxxxxxxxxxx]
Sent: 25 September 2011 23:01
To: Ian Tobin; Xen Users List
Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
Hello,
Sorry for the late reply but I was doing some testing on recompiling the kernel from scratch.
Actually I have get rid of the previously described errors. This was by activating again the same
two features of DEVTMPFS. Now I honestly am consused when starting Dom0 kernel + Xen
it stops at: Loading, please wait... (never continuing in black screen)
Later booting on - linux + xen + (recovery mode) -, it stops at:
Loading, please wait...
udev [966]: starting version 164
hrtimer: interrupt took 2701681 ns
I've found this is a bug in some VMs https://lkml.org/lkml/2010/3/30/719
But the patch doesn't fix anything it just delays what is unavoidable.
It actually detects the disk controllers because dmesg and lspci report they are working well when
booting linux 3.0.0 alone. I have also installed new version of UDEV.. 172-1 but later downgraded
to 164-3 since it is unstable and triggered more issues.
I think there could be an option in the kernel config I should either activate or deactivate which can
be related to this.
Thank you!
Tony.
Subject: Re: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
From: itobin@xxxxxxxxxxxxx
Date: Sat, 24 Sep 2011 13:53:17 +0100
To: dftonywhite@xxxxxxxxxxx
CC: xen-users@xxxxxxxxxxxxxxxxxxx
Could it be it's not detecting your disk controllers?
Ian
Tidyhosts UK - Server & Web Specialists
This email and its attachments are scanned by TidyHosts UK. All emails and attachments should also be scanned by the recipient. TidyHosts UK accept no responsibility for any damage caused by any virus attached to this email. This email is confidential and is intended only for the addressee(s).
Hello Ian,
Thanks for your replay! I have just done the same things you did and nothing changed.
After booting Xen the same error appears.
I dare to think it is something related either to a .deb package missing or a kernel config
option I missed. But what would they be if those can be my mistakes?
Thank you
Tony.
Subject: RE: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
Date: Fri, 23 Sep 2011 23:43:13 +0100
From: itobin@xxxxxxxxxxxxxx
To: dftonywhite@xxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
CC:
Hi,
I had this and couldn’t figure out what is was. In the end I removed the modules from /lib/modules and the kernel files in /boot then reinstalled and made the new initrd. Worked after.
Thanks
Ian
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Antonio Colin
Sent: 23 September 2011 23:07
To: Xen Users List
Subject: [Xen-users] Debian 6 as Dom0 not booting on Xen 4.1.1
Hi everyone,
I have compiled and installed Linux 3.0.0 and Xen 4.1.1 on Debian Squeeze, both from source and enabling this two options:
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
The problem arises when booting Xen. After its startup, it seems that it cannot correctly load Dom0 devices since it says:
Loading, please wait...
Mount: mounting none on /dev failed: No such device
w: devtmpfs not available, falling back to tmpfs for /dev
udevd[972]: Worker [978] unexpectedly returned with status 0x0100
Anyone has an idea of what I am doing wrong? Does it need any package or do I need to rebuild initramfs?
Thank you in advance,
Tony.
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
