[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] [Xen-devel] Xen Source code build



Redirecting to xen-uers@ where this belongs.

On Sat, 2012-04-07 at 07:25 +0100, Mohit Dhingra wrote:
> Hi Ian/All,
> 
> I am sorry, I was mistaken by "For now, a 32 bits host environnment is
> necessary to build successfuly. building on a 64 bits host machine is
> not yet supported" in http://xen.org/products/xci_source.html
> 
> Well, I am now able to build the xen binary image xen4.1.2, (after
> installing the missing packages as suggested by you)
> 
> -rw-r--r--  1 root root   691748 Jul 27  2011 xen-4.0.2_52-0.2.1.gz
> lrwxrwxrwx  1 root root       21 Feb  9 23:49 xen-4.0.gz ->
> xen-4.0.2_52-0.2.1.gz
> -rw-r--r--  1 root root   734699 Apr  7 11:39 xen-4.1.2.gz
> lrwxrwxrwx  1 root root       12 Apr  7 11:39 xen-4.1.gz ->
> xen-4.1.2.gz
> lrwxrwxrwx  1 root root       12 Apr  7 11:39 xen-4.gz -> xen-4.1.2.gz
> 
> I earlier had the xen-4.0.2 installed through zypper in Dom0 (opensuse
> 11.4)

You removed this before installing 4.1?

> (cadlab:/srv/xen-4.1.2 # uname -a
> Linux cadlab 2.6.37.6-0.11-xen #1 SMP 2011-12-19 23:39:38 +0100 x86_64
> x86_64 x86_64 GNU/Linux
> )
> 
> 
> But xm commands are not working now. 
> 
> cadlab:/srv/xen-4.1.2 # xm list
> Error: Unable to connect to xend: Connection refused. Is xend running?
> 
> Is it not compatible with the openSUSE11.4? Or is there something
> which I am missing out.

Please check the logs under /var/log/xen/ for clues.

Note that xm is going to be deprecated in 4.2 so you might want to
consider using the new xl toolstack instead.

Ian.

> 
> ---------------------------- 
> 
> Thanks & Regards
> Mohit Dhingra 
> +919611190435
> 
> 
> On 2 April 2012 14:51, Olaf Hering <olaf@xxxxxxxxx> wrote:
>         On Mon, Apr 02, Ian Campbell wrote:
>         
>         > On Sun, 2012-04-01 at 06:34 +0100, Mohit Dhingra wrote:
>         > > Hello All,
>         > >
>         > > I am a newbie to Linux and Xen. I tried compiling Xen
>         Source code (I
>         > > want to make some changes and see how it works), but it
>         failed on my
>         > > system as it couldn't find gnu-stubs32.h. Later, on
>         looking at
>         > > Makefile, I figured out that for x86_64, it is not yet
>         supported !!
>         
>         
>         > WRT gnu-stubs32.h I suspect you are missing some -devel
>         package or
>         > other. I don't know about how SuSE lays things out but you
>         should locate
>         > the package containing this file and install it. Googling
>         suggests that
>         > perhaps you meant gnu/stubs32.h? In which case you probably
>         want to
>         > install glibc-devel.
>         
>         
>         Running configure and/or make in a 32bit shell is not needed.
>         "zypper in gcc-32bit glibc-devel-32bit" will install the
>         required
>         packages to compile the 32bit parts in the firmware.
>         
>         Olaf
> 



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.