[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-users] XENBUS: Waiting for devices to initialise:



Attaching your .cofig would be a good start.

On a modern kernel /sys/bus/xen-backend should contain "vif", YMMV under
other kernels, but there ought to be some indication under /sys that
netback exists.

On Tue, 2012-07-17 at 16:01 +0100, Ian Tobin wrote:
> Ian,
> 
> How would I tell this? I selected all options when compiling as static.
> 
> The kernel for DomU is just a test, ive tried kernels up to 3.4.5 and still 
> not working.
> 
> BTW ive rebuilt the main host twice with the same problem.
> 
> Thanks
> 
> Ian
> 
> -----Original Message-----
> From: Ian Campbell [mailto:Ian.Campbell@xxxxxxxxxx] 
> Sent: 17 July 2012 15:59
> To: Ian Tobin
> Cc: xen-users@xxxxxxxxxxxxx
> Subject: Re: [Xen-users] XENBUS: Waiting for devices to initialise:
> 
> On Tue, 2012-07-17 at 15:49 +0100, Ian Tobin wrote:
> > XENBUS: Timeout connecting to device: device/vif/0 (local state 1, 
> > remote state 1)
> 
> > ifconfig âa shows (with domu running)
> 
> There doesn't seem to be any vifX.Y in there -- perhaps you don't have the 
> netback driver loaded or compiled into your kernel?
> 
> > kernel = "/boot/vmlinuz-2.6.18.8-xen"
> 
> Why so ancient?
> 
> Ian.
> 
> 
> 



_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxx
http://lists.xen.org/xen-users

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.