|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] [Xen-devel] 3.5.0 dom0 crash on boot
On Tue, Jul 31, 2012 at 08:28:57AM +0100, Andrew Lyon wrote: > On Fri, Jul 27, 2012 at 7:04 PM, Konrad Rzeszutek Wilk > <konrad@xxxxxxxxxx> wrote: > > On Fri, Jul 27, 2012 at 01:26:09PM +0100, Andrew Lyon wrote: > >> Setting dom0_mem=1024M enabled the system to boot. > >> > >> The system has 32gb ram, is this a known issue? > > > > Not that I know off. What would be usefull if you ran > > gdb on your vmlinux and stuck those EIP addresses to > > figure out what broke. > > > > Looking at the registers state it could be very well > > that you are hitting this: > > > > www.gossamer-threads.com/lists/linux/kernel/1571716 > > > > Try the patch and see if that fixes it? > > I can confirm that the patch fixes the problem, I can boot without > setting dom0_ram=1024M > > My system is Supermicro X9DRL-3/IF with 2 x E5-2640 Xeon's and 32gb > RAM (8 x Hynix Semiconductor HMT351R7CFR8C) BIOS 1.0a > > Thanks! Sure. Any chance you could send me your full dmesg with the fixed kernel please? I've another patch that is going to be used instead and I think it will work with your setup - but it never hurts to double check. Thanks. > Andy > > >> > >> Andy > >> > >> On Fri, Jul 27, 2012 at 1:04 PM, Andrew Lyon <andrew.lyon@xxxxxxxxx> wrote: > >> > Hi, > >> > > >> > I've not tried pv_ops for a long time but just got a new system > >> > (Supermicro X9DRL-iF) so decided to try 3.5.0 with the latest Xen > >> > 4.2-unstable, unfortunately the system crashes immediately after > >> > loading dom0: > >> > > >> > traps.c:486:d0 Unhandled invalid opcode fault/trap [#6] on VCPU 0 > >> > [ec=0000] > >> > > >> > I've tried loading both bzImage and vmlinuz (gzip compressed vmlinuz) > >> > with the same result. > >> > > >> > Full boot log: > >> > > >> > > >> > root (hd0,0) > >> > Filesystem type is ext2fs, partition type 0x83 > >> > kernel /xen-4.2-unstable.gz iommu=1 iommu_inclusive_mapping=1 > >> > com1=38400,8n1 co > >> > nsole=com1 noirqbalance watchdog dom0_vcpus_pin loglvl=all > >> > guest_loglvl=all cpu > >> > idle conring_size=65536 > >> > [Multiboot-elf, <0x100000:0 ! __ __ _ _ > >> > ____ _ _ _ > >> > \ \/ /___ _ __ | || | |___ \ _ _ _ __ ___| |_ __ _| |__ | | > >> > ___ * > >> > \ // _ \ '_ \ | || |_ __) |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ > >> > \ * > >> > / \ __/ | | | |__ _| / __/|__| |_| | | | \__ \ || (_| | |_) | | > >> > __/ * > >> > /_/\_\___|_| |_| |_|(_)_____| \__,_|_| > >> > |_|___/\__\__,_|_.__/|_|\___| * > >> > > >> > * > >> > (XEN) Xen version 4.2-unstable (@josims.local) (gcc version 4.5.3 > >> > (Gentoo 4.5.3-r2 p1.1, pie-0.4.7) ) Fri Jul 27 20:28:57 BST 2012 > >> > (XEN) Latest ChangeSet: Thu Jul 26 10:55:09 2012 +0100 > >> > 25667:b0fc6f8d5066 * > >> > (XEN) Bootloader: GNU GRUB 0.97 > >> > * > >> > (XEN) Command line: iommu=1 iommu_inclusive_mapping=1 com1=38400,8n1 > >> > console=com1 noirqbalance watchdog dom0_vcpus_pin loglvl=all > >> > guest_loglvl=all cpuidle conring_size=65536 Use the * and * keys to > >> > select which entry is highlighted. > >> > (XEN) Video information: 'e' to edit the selected command in the > >> > (XEN) VGA is text mode 80x25, font 8x16ine, 'o' to open a new line > >> > (XEN) VBE/DDC methods: none; EDID transfer time: 0 secondsve the > >> > (XEN) EDID info not retrieved because no DDC retrieval method detected > >> > (XEN) Disc information: > >> > (XEN) Found 4 MBR signatures > >> > (XEN) Found 6 EDD information structures > >> > (XEN) Xen-e820 RAM map: > >> > (XEN) 0000000000000000 - 000000000008e400 (usable) > >> > (XEN) 000000000008e400 - 00000000000a0000 (reserved) > >> > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > >> > (XEN) 0000000000100000 - 000000007e49a000 (usable) > >> > (XEN) 000000007e49a000 - 000000007e5b2000 (ACPI NVS) > >> > (XEN) 000000007e5b2000 - 000000007f1b2000 (reserved) > >> > (XEN) 000000007f1b2000 - 000000007f22e000 (ACPI data) > >> > (XEN) 000000007f22e000 - 000000007f2c7000 (reserved) > >> > (XEN) 000000007f2c7000 - 000000007f2ce000 (ACPI NVS) > >> > (XEN) 000000007f2ce000 - 000000007f339000 (reserved) > >> > (XEN) 000000007f339000 - 000000007f341000 (ACPI NVS) > >> > (XEN) 000000007f341000 - 000000007f36a000 (reserved) > >> > (XEN) 000000007f36a000 - 000000007f800000 (ACPI NVS) > >> > (XEN) 0000000080000000 - 0000000090000000 (reserved) > >> > (XEN) 00000000fed1c000 - 00000000fed40000 (reserved) > >> > (XEN) 00000000ff000000 - 0000000100000000 (reserved) > >> > (XEN) 0000000100000000 - 0000000880000000 (usable) > >> > (XEN) ACPI: RSDP 000F0490, 0024 (r2 ALASKA) > >> > (XEN) ACPI: XSDT 7F1B2088, 0094 (r1 ALASKA A M I 1072009 AMI > >> > 10013) > >> > (XEN) ACPI: FACP 7F1BC860, 00F4 (r4 ALASKA A M I 1072009 AMI > >> > 10013) > >> > (XEN) ACPI: DSDT 7F1B21B0, A6AD (r2 ALASKA A M I 15 INTL > >> > 20091112) > >> > (XEN) ACPI: FACS 7F33EF80, 0040 > >> > (XEN) ACPI: APIC 7F1BC958, 01B4 (r3 ALASKA A M I 1072009 AMI > >> > 10013) > >> > (XEN) ACPI: MCFG 7F1BCB10, 003C (r1 ALASKA OEMMCFG. 1072009 MSFT > >> > 97) > >> > (XEN) ACPI: SRAT 7F1BCB50, 0430 (r1 A M I AMI SRAT 1 AMI. > >> > 0) > >> > (XEN) ACPI: SLIT 7F1BCF80, 0030 (r1 A M I AMI SLIT 0 AMI. > >> > 0) > >> > (XEN) ACPI: HPET 7F1BCFB0, 0038 (r1 ALASKA A M I 1072009 AMI. > >> > 5) > >> > (XEN) ACPI: SPMI 7F1BCFE8, 0040 (r5 A M I OEMSPMI 0 AMI. > >> > 0) > >> > (XEN) ACPI: SSDT 7F1BD028, 70104 (r2 INTEL CpuPm 4000 INTL > >> > 20091112) > >> > (XEN) ACPI: DMAR 7F22D130, 0188 (r1 A M I OEMDMAR 1 INTL > >> > 1) > >> > (XEN) ACPI: EINJ 7F22D2B8, 0130 (r1 AMI AMI EINJ 0 > >> > 0) > >> > (XEN) ACPI: ERST 7F22D3E8, 0210 (r1 AMIER AMI ERST 0 > >> > 0) > >> > (XEN) ACPI: HEST 7F22D5F8, 00A8 (r1 AMI AMI HEST 0 > >> > 0) > >> > (XEN) ACPI: BERT 7F22D6A0, 0030 (r1 AMI AMI BERT 0 > >> > 0) > >> > (XEN) ACPI: BGRT 7F22D6D0, 0038 (r0 ALASKA A M I 1072009 AMI > >> > 10013) > >> > (XEN) System RAM: 32740MB (33525920kB) > >> > (XEN) SRAT: PXM 0 -> APIC 0 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 1 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 2 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 3 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 4 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 5 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 6 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 7 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 8 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 9 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 10 -> Node 0 > >> > (XEN) SRAT: PXM 0 -> APIC 11 -> Node 0 > >> > (XEN) SRAT: PXM 1 -> APIC 32 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 33 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 34 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 35 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 36 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 37 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 38 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 39 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 40 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 41 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 42 -> Node 1 > >> > (XEN) SRAT: PXM 1 -> APIC 43 -> Node 1 > >> > (XEN) SRAT: Node 0 PXM 0 0-80000000 > >> > (XEN) SRAT: Node 0 PXM 0 100000000-480000000 > >> > (XEN) SRAT: Node 1 PXM 1 480000000-880000000 > >> > (XEN) NUMA: Using 19 for the hash shift. > >> > (XEN) Domain heap initialised DMA width 32 bits > >> > (XEN) found SMP MP-table at 000fdb10 > >> > (XEN) DMI 2.7 present. > >> > (XEN) Using APIC driver default > >> > (XEN) ACPI: PM-Timer IO Port: 0x408 > >> > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[404,0], pm1x_evt[400,0] > >> > (XEN) ACPI: 32/64X FACS address mismatch in FADT - > >> > 7f33ef80/0000000000000000, using 32 > >> > (XEN) ACPI: wakeup_vec[7f33ef8c], vec_size[20] > >> > (XEN) ACPI: Local APIC address 0xfee00000 > >> > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > >> > (XEN) Processor #0 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) > >> > (XEN) Processor #2 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) > >> > (XEN) Processor #4 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) > >> > (XEN) Processor #6 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled) > >> > (XEN) Processor #8 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled) > >> > (XEN) Processor #10 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x20] enabled) > >> > (XEN) Processor #32 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x22] enabled) > >> > (XEN) Processor #34 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x24] enabled) > >> > (XEN) Processor #36 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x26] enabled) > >> > (XEN) Processor #38 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x28] enabled) > >> > (XEN) Processor #40 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x2a] enabled) > >> > (XEN) Processor #42 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > >> > (XEN) Processor #1 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) > >> > (XEN) Processor #3 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) > >> > (XEN) Processor #5 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) > >> > (XEN) Processor #7 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled) > >> > (XEN) Processor #9 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled) > >> > (XEN) Processor #11 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled) > >> > (XEN) Processor #33 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled) > >> > (XEN) Processor #35 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled) > >> > (XEN) Processor #37 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x27] enabled) > >> > (XEN) Processor #39 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x29] enabled) > >> > (XEN) Processor #41 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x2b] enabled) > >> > (XEN) Processor #43 6:13 APIC version 21 > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1]) > >> > (XEN) ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1]) > >> > (XEN) Overriding APIC driver with bigsmp > >> > (XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) > >> > (XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 > >> > (XEN) ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) > >> > (XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 > >> > (XEN) ACPI: IOAPIC (id[0x03] address[0xfec40000] gsi_base[48]) > >> > (XEN) IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71 > >> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > >> > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > >> > (XEN) ACPI: IRQ0 used by override. > >> > (XEN) ACPI: IRQ2 used by override. > >> > (XEN) ACPI: IRQ9 used by override. > >> > (XEN) Enabling APIC mode: Phys. Using 3 I/O APICs > >> > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > >> > (XEN) ERST table is invalid > >> > (XEN) Using ACPI (MADT) for SMP configuration information > >> > (XEN) SMP: Allowing 24 CPUs (0 hotplug CPUs) > >> > (XEN) IRQ limits: 72 GSI, 4552 MSI/MSI-X > >> > (XEN) Switched to APIC driver x2apic_cluster. > >> > (XEN) Using scheduler: SMP Credit Scheduler (credit) > >> > (XEN) Detected 2500.105 MHz processor. > >> > (XEN) Initing memory sharing. > >> > (XEN) xstate_init: using cntxt_size: 0x340 and states: 0x7 > >> > (XEN) mce_intel.c:1239: MCA Capability: BCAST 1 SER 1 CMCI 1 firstbank > >> > 0 extended MCE MSR 0 > >> > (XEN) Intel machine check reporting enabled > >> > (XEN) PCI: MCFG configuration 0: base 80000000 segment 0000 buses 00 - ff > >> > (XEN) PCI: MCFG area at 80000000 reserved in E820 > >> > (XEN) PCI: Using MCFG for segment 0000 bus 00-ff > >> > (XEN) Intel VT-d Snoop Control enabled. > >> > (XEN) Intel VT-d Dom0 DMA Passthrough not enabled. > >> > (XEN) Intel VT-d Queued Invalidation enabled. > >> > (XEN) Intel VT-d Interrupt Remapping enabled. > >> > (XEN) Intel VT-d Shared EPT tables enabled. > >> > (XEN) I/O virtualisation enabled > >> > (XEN) - Dom0 mode: Relaxed > >> > (XEN) Enabled directed EOI with ioapic_ack_old on! > >> > (XEN) ENABLING IO-APIC IRQs > >> > (XEN) -> Using old ACK method > >> > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > >> > (XEN) TSC deadline timer enabled > >> > (XEN) Platform timer is 14.318MHz HPET > >> > (XEN) Defaulting to alternative key handling; send 'A' to switch to > >> > normal mode. > >> > (XEN) Allocated console ring of 65536 KiB. > >> > (XEN) VMX: Supported advanced features: > >> > (XEN) - APIC MMIO access virtualisation > >> > (XEN) - APIC TPR shadow > >> > (XEN) - Extended Page Tables (EPT) > >> > (XEN) - Virtual-Processor Identifiers (VPID) > >> > (XEN) - Virtual NMI > >> > (XEN) - MSR direct-access bitmap > >> > (XEN) - Unrestricted Guest > >> > (XEN) HVM: ASIDs enabled. > >> > (XEN) HVM: VMX enabled > >> > (XEN) HVM: Hardware Assisted Paging (HAP) detected > >> > (XEN) HVM: HAP page sizes: 4kB, 2MB, 1GB > >> > (XEN) Brought up 24 CPUs > >> > (XEN) Testing NMI watchdog --- CPU#0 okay. CPU#1 okay. CPU#2 okay. > >> > CPU#3 okay. CPU#4 okay. CPU#5 okay. CPU#6 okay. CPU#7 okay. CPU#8 > >> > okay. CPU#9 okay. CPU#10 okay. CPU#11 okay. CPU#12 okay. CPU#13 okay. > >> > CPU#14 okay. CPU#15 okay. CPU#16 okay. CPU#17 okay. CPU#18 okay. > >> > CPU#19 okay. CPU#20 okay. CPU#21 okay. CPU#22 okay. CPU#23 okay. > >> > (XEN) ACPI sleep modes: S3 > >> > (XEN) mcheck_poll: Machine check polling timer started. > >> > (XEN) *** LOADING DOMAIN 0 *** > >> > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x820000 > >> > (XEN) elf_parse_binary: phdr: paddr=0x1a00000 memsz=0x740e8 > >> > (XEN) elf_parse_binary: phdr: paddr=0x1a75000 memsz=0x13340 > >> > (XEN) elf_parse_binary: phdr: paddr=0x1a89000 memsz=0x549000 > >> > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1fd2000 > >> > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > >> > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > >> > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > >> > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > >> > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff81a89210 > >> > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000 > >> > (XEN) elf_xen_parse_note: FEATURES = > >> > "!writable_page_tables|pae_pgdir_above_4gb" > >> > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > >> > (XEN) elf_xen_parse_note: LOADER = "generic" > >> > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > >> > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > >> > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > >> > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > >> > (XEN) elf_xen_addr_calc_check: addresses: > >> > (XEN) virt_base = 0xffffffff80000000 > >> > (XEN) elf_paddr_offset = 0x0 > >> > (XEN) virt_offset = 0xffffffff80000000 > >> > (XEN) virt_kstart = 0xffffffff81000000 > >> > (XEN) virt_kend = 0xffffffff81fd2000 > >> > (XEN) virt_entry = 0xffffffff81a89210 > >> > (XEN) p2m_base = 0xffffffffffffffff > >> > (XEN) Xen kernel: 64-bit, lsb, compat32 > >> > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1fd2000 > >> > (XEN) PHYSICAL MEMORY ARRANGEMENT: > >> > (XEN) Dom0 alloc.: 0000000430000000->0000000438000000 (8190061 > >> > pages to be allocated) > >> > (XEN) VIRTUAL MEMORY ARRANGEMENT: > >> > (XEN) Loaded kernel: ffffffff81000000->ffffffff81fd2000 > >> > (XEN) Init. ramdisk: ffffffff81fd2000->ffffffff81fd2000 > >> > (XEN) Phys-Mach map: ffffffff81fd2000->ffffffff85e8e368 > >> > (XEN) Start info: ffffffff85e8f000->ffffffff85e8f4b4 > >> > (XEN) Page tables: ffffffff85e90000->ffffffff85ec3000 > >> > (XEN) Boot stack: ffffffff85ec3000->ffffffff85ec4000 > >> > (XEN) TOTAL: ffffffff80000000->ffffffff86000000 > >> > (XEN) ENTRY ADDRESS: ffffffff81a89210 > >> > (XEN) Dom0 has maximum 24 VCPUs > >> > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81820000 > >> > (XEN) elf_load_binary: phdr 1 at 0xffffffff81a00000 -> 0xffffffff81a740e8 > >> > (XEN) elf_load_binary: phdr 2 at 0xffffffff81a75000 -> 0xffffffff81a88340 > >> > (XEN) elf_load_binary: phdr 3 at 0xffffffff81a89000 -> 0xffffffff81b11000 > >> > (XEN) Scrubbing Free RAM: .done. > >> > (XEN) Initial low memory virq threshold set at 0x4000 pages. > >> > (XEN) Std. Loglevel: All > >> > (XEN) Guest Loglevel: All > >> > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > >> > input to Xen) > >> > (XEN) Freed 236kB init memory. > >> > mapping kernel into physical memory > >> > about to get started... > >> > (XEN) traps.c:486:d0 Unhandled invalid opcode fault/trap [#6] on VCPU > >> > 0 [ec=0000] > >> > (XEN) domain_crash_sync called from entry.S > >> > (XEN) Domain 0 (vcpu#0) crashed on cpu#0: > >> > (XEN) ----[ Xen-4.2-unstable x86_64 debug=y Not tainted ]---- > >> > (XEN) CPU: 0 > >> > (XEN) RIP: e033:[<ffffffff81a8f18e>] > >> > (XEN) RFLAGS: 0000000000000206 EM: 1 CONTEXT: pv guest > >> > (XEN) rax: ffffffff81fd3000 rbx: 0000000000000021 rcx: > >> > 0000000000001000 > >> > (XEN) rdx: ffffffff81fd2000 rsi: 0000000000001000 rdi: > >> > 0000000000001000 > >> > (XEN) rbp: 0000000000000088 rsp: ffffffff81a01d38 r8: > >> > 0000000000000088 > >> > (XEN) r9: 0000000000000021 r10: 0000000000000000 r11: > >> > 0000000100000000 > >> > (XEN) r12: 0000000000079700 r13: 0000000000000440 r14: > >> > 0000000000000088 > >> > (XEN) r15: 0000000000000021 cr0: 000000008005003b cr4: > >> > 00000000000426f0 > >> > (XEN) cr3: 0000000431a0b000 cr2: 0000000000000000 > >> > (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: e02b cs: e033 > >> > (XEN) Guest stack trace from rsp=ffffffff81a01d38: > >> > (XEN) 0000000000001000 0000000100000000 ffffffff81a8f18e > >> > 000000010000e030 > >> > (XEN) 0000000000010006 ffffffff81a01d70 000000000000e02b > >> > ffffffff81a8de7c > >> > (XEN) 0000000000000108 0000000000851000 00000000007e8444 > >> > 0000000000079700 > >> > (XEN) ffffffff81a01e20 ffffffff81a01df8 0000000000859445 > >> > ffffffff81a8e25c > >> > (XEN) 00000000007d7800 0000000000851000 0000000000079793 > >> > ffffffff81a8ca2c > >> > (XEN) 0000000000081bd8 0000000000081bd8 ffffffff81ac2990 > >> > 00000000007d786d > >> > (XEN) ffffffff81a01e20 0000000000000001 0000000000000000 > >> > 0000000000007ff0 > >> > (XEN) ffffffff81a01e28 00000000007e8444 4000000000000000 > >> > 00000000007d786d > >> > (XEN) 0000000000081bd8 00000000007d786d ffffffff81ac297c > >> > 0000000000000000 > >> > (XEN) 0000000000000013 ffffffff81a8cda7 0000000800000014 > >> > 00000007d786d000 > >> > (XEN) 0000000007528793 0000001400000000 0000000000000014 > >> > 0000000000000013 > >> > (XEN) ffffffff00000014 ffffffff81ac2800 ffffffff81452556 > >> > 7ff0000000000000 > >> > (XEN) 0000000000000000 ffffffffffffffff ffffffff81ac0000 > >> > ffffffff81a01f80 > >> > (XEN) 0000000000000000 0000000000000000 0000000000000000 > >> > ffffffff81a9265a > >> > (XEN) ffffffffffffffff ffffffff81a8f2f6 0000000000000010 > >> > ffffffff81a01f68 > >> > (XEN) ffffffff81a01f28 0000000000000000 ffffffff81452556 > >> > ffffffffffffffff > >> > (XEN) ffffffff81ac0000 0000000000000000 0000000000000000 > >> > 0000000000000000 > >> > (XEN) 0000000000000000 ffffffff81a8985a 0000000001bb4000 > >> > 0000000000000000 > >> > (XEN) 0000000000000000 0000000000000000 0000000000000000 > >> > ffffffff85e90000 > >> > (XEN) 0000000000000000 0000000000000000 0000000000000000 > >> > ffffffff81a8c6ed > >> > (XEN) Domain 0 crashed: rebooting machine in 5 seconds. > >> > (XEN) Resetting with ACPI MEMORY or I/O RESET_REG. > >> > > >> > > >> > Andy > >> > >> _______________________________________________ > >> Xen-devel mailing list > >> Xen-devel@xxxxxxxxxxxxx > >> http://lists.xen.org/xen-devel > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxx > http://lists.xen.org/xen-devel _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxx http://lists.xen.org/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |